Eventos Anais de eventos

Aerospace Engineering

Aerodynamics 37

DEVELOPMENT OF AN EXPERIMENTAL CORRECTION MODEL FOR HORIZONTAL BUOYANCY IN THE TESTING SECTION OF THE CLOSED-CIRCUIT WIND TUNNEL AT UFMG

Submission Author: Marina Fernandes , MG
Co-Authors: Marina Fernandes, Guilherme Papini
Presenter: Marina Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-2240

Aerodynamic validation of vortex-based non-linear methods with leading-edge vortex shedding

Submission Author: Tiago Monteiro , SP
Co-Authors: Tiago Monteiro, Kiran Ramesh, Hugh Bird, Flávio Silvestre, ROBERTO GIL ANNES DA SILVA
Presenter: Tiago Monteiro

doi://10.26678/ABCM.COBEM2023.COB2023-2211

VALIDATION AND VERIFICATION OF AN OPEN-SOURCE CFD CODE FOR THE AERODYNAMICS SOLUTION OF AIR AND GROUND VEHICLES

Submission Author: Guilherme Espíndola , MG
Co-Authors: Guilherme Espíndola, Odenir de Almeida
Presenter: Guilherme Espíndola

doi://10.26678/ABCM.COBEM2023.COB2023-0272

NUMERICAL ANALYSIS OF THE FLOW OVER AN E-VTOL CONCEPT VEHICLE

Submission Author: Odenir de Almeida , MG
Co-Authors: Gabriel Cicelini, Odenir de Almeida
Presenter: Odenir de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-0252

Preliminary aerodynamics analysis of a three-dimensional bump at subsonic and supersonic flow

Submission Author: John J Vaca-Rios , SP
Co-Authors: John J Vaca-Rios, Hernán Cerón-Muñoz
Presenter: John J Vaca-Rios

doi://10.26678/ABCM.COBEM2023.COB2023-0382

Numerical investigation of splitter plates as noise reduction techniques for tandem cylinders

Submission Author: Lucas Gregório Cardoso , MT
Co-Authors: Lucas Gregório Cardoso, Filipe Dutra da Silva
Presenter: Filipe Dutra da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0985

STUDY OF THE IMPACT OF HARMONIC ATUATION ON LAMINAR SEPARATION BUBBLES ON AN AIRFOIL

Submission Author: Elmer Gennaro , SP
Co-Authors: Marcos Paulo Ziola de Nardo, Daniel Sampaio Souza, Elmer Gennaro, Leandra Abreu
Presenter: Elmer Gennaro

doi://10.26678/ABCM.COBEM2023.COB2023-0641

DESTRUCTION AND REGENERATION PROCESS OF A LAMINAR SEPARATION BUBBLE UNDER FORCING CONDITIONS

Submission Author: omar elias horna pinedo , RJ
Co-Authors: omar elias horna pinedo, Igor Braga de Paula
Presenter: omar elias horna pinedo

doi://10.26678/ABCM.COBEM2023.COB2023-1790

A methodology of airfoil and wing optimization using genetic algorithms

Submission Author: Giovana Weffort Fernandes , SP
Co-Authors: Giovana Weffort Fernandes, Manuel Barcelos Júnior
Presenter: Giovana Weffort Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-0204

A Study of Improved Limiter Formulations for Second-Order Finite Volume Schemes Applied to Unstructured Grids

Submission Author: Frederico Bolsoni Oliveira , SP
Co-Authors: Frederico Bolsoni Oliveira, João Luiz F. Azevedo
Presenter: João Luiz F. Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-0213

A study of boundary layer developing under adverse pressure gradients for a NACA0012 airfoil at high angle of attack.

Submission Author: Leandro Júnio Oliveira Silva , SP
Co-Authors: Leandro Júnio Oliveira Silva, William Wolf
Presenter: William Wolf

doi://10.26678/ABCM.COBEM2023.COB2023-0141

Simulation of Hypersonic Flows in Thermochemical Non-Equilibrium Conditions: Influence of the Control Temperature of Park's Two-Temperature Model in the Flow Behavior

Submission Author: Gibson De Marchi Poltronieri , SP
Co-Authors: Gibson De Marchi Poltronieri, Farney Moreira, João Luiz F. Azevedo
Presenter: Gibson De Marchi Poltronieri

doi://10.26678/ABCM.COBEM2023.COB2023-0144

AERODYNAMIC STUDY OF THE USE OF A TELESCOPIC WINGLET IN AN AGRICULTURE AIRCRAFT

Submission Author: Daniel de Paula , SP
Co-Authors: Daniel de Paula, Joel Laguardia Campos Reis, João Paulo Eguea
Presenter: Daniel de Paula

doi://10.26678/ABCM.COBEM2023.COB2023-0906

Validation of Inviscid CFD Analysis for the Generic Future Fighter

Submission Author: Daniel Ferreira , SP
Co-Authors: Daniel Ferreira, Adson De Paula, Ney Rafael Secco, Ricardo Galdino da SIlva
Presenter: Adson De Paula

doi://10.26678/ABCM.COBEM2023.COB2023-1927

Impact of airfoil thickness on the rotational effect over wind-turbine-blade flow

Submission Author: Daniel Sampaio Souza , SP
Co-Authors: Daniel Sampaio Souza, Nathan Oliveira Assis
Presenter: Daniel Sampaio Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0613

AERODYNAMIC OPTIMIZATION OF WING-MOUNTED ROTOR CONFIGURATION FOR EVTOLS

Submission Author: Gilberto Bueno Luque Filho , SP
Co-Authors: Gilberto Bueno Luque Filho, João Luiz F. Azevedo
Presenter: João Luiz F. Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-0634

Influence of the Rear Wing on Sliding in Formula 1 Vehicles

Submission Author: Patrick Silva Melo , SC
Co-Authors: Patrick Silva Melo, Leonel R Cancino
Presenter: Patrick Silva Melo

doi://10.26678/ABCM.COBEM2023.COB2023-0602

Experiments on the influence of bump on the boundary layer transition.

Submission Author: Lenz Jossue Lopez Lazaro , SP
Co-Authors: Lenz Jossue Lopez Lazaro, Victor Barcelos Victorino, Felipe Oliveira Aguirre, Marcello Augusto Faraco de Medeiros
Presenter: Lenz Jossue Lopez Lazaro

doi://10.26678/ABCM.COBEM2023.COB2023-2177

Parametric Study of an Experimental Rocket's Drag in Transonic Flow

Submission Author: Pedro Lacerda Montes , DF
Co-Authors: Pedro Lacerda Montes, Vinicius Alves, Guilherme Luis Takahashi de Carvalho
Presenter: Pedro Lacerda Montes

doi://10.26678/ABCM.COBEM2023.COB2023-1895

A COMPARATIVE STUDY ON THE RADIATIVE HEAT TRANSFER FOR HYPERSONIC NONEQUILIBRIUM FLOWS OVER A CYLINDER

Submission Author: Farney Moreira , SP
Co-Authors: Farney Moreira, William Wolf, João Luiz F. Azevedo
Presenter: João Luiz F. Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-0168

Computational Analysis of the effect of Wavy Leading Edge on Stabilizer

Submission Author: Pablo Gonzalez-DeGreiff , SP
Co-Authors: Pablo Gonzalez-DeGreiff, WILLIAM GOMEZ RIVERA, Pedro David Bravo-Mosquera, Hernán Cerón-Muñoz
Presenter: Pablo Gonzalez-DeGreiff

doi://10.26678/ABCM.COBEM2023.COB2023-0221

Numerical Analysis of a Two Dimensional Compressible Fluid Flow Over an Asymmetric Gap

Submission Author: Thiago Freisleben Ribeiro Rezende , SP
Co-Authors: Thiago Freisleben Ribeiro Rezende, Felipe Oliveira Aguirre, Victor Barcelos Victorino, Marcello Augusto Faraco de Medeiros
Presenter: Thiago Freisleben Ribeiro Rezende

doi://10.26678/ABCM.COBEM2023.COB2023-2296

Unsteady Aerodynamic Analysis of an Emulated Wandering Albatross

Submission Author: LUCAS ALVES , MG
Co-Authors: LUCAS ALVES, Ricardo Luiz Utsch de Freitas Pinto, Oscar Ricardo Sandoval Rodriguez
Presenter: Oscar Ricardo Sandoval Rodriguez

doi://10.26678/ABCM.COBEM2023.COB2023-2071

Numerical and experimental analysis of rotating blunt bodies trajectory at sea-level conditions.

Submission Author: Geovanna Borges , DF
Co-Authors: Geovanna Borges , Olexiy Shynkarenko, Patrick Christian de Melo, Washington Siqueira da Macena, Gibran Cavalcante Alves Silva
Presenter: Geovanna Borges

doi://10.26678/ABCM.COBEM2023.COB2023-1906

Numerical analysis of endplate drag components for a low speed aircraft

Submission Author: Breno Lopes Tumelero , SC
Co-Authors: Breno Lopes Tumelero, Filipe Dutra da Silva, Rafael Cuenca
Presenter: Filipe Dutra da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1051

Experimental investigation of the boundary layer transition over surface irregularities

Submission Author: Rafael Estorniolo , SP
Co-Authors: Rafael Estorniolo, Felipe Oliveira Aguirre, Victor Barcelos Victorino, Marcello Augusto Faraco de Medeiros
Presenter: Victor Barcelos Victorino

doi://10.26678/ABCM.COBEM2023.COB2023-2271

Characterization of intermittent extreme events in adiabatic and isothermal supersonic turbine cascades

Submission Author: Gabriel Yudi Ragni Hamada , SP
Co-Authors: Gabriel Yudi Ragni Hamada, Hugo Felippe da Silva Lui, William Wolf, Tulio Rodarte Ricciardi, Carlos JUNQUEIRA-JUNIOR
Presenter: Gabriel Yudi Ragni Hamada

doi://10.26678/ABCM.COBEM2023.COB2023-0538

Investigation of shock-boundary layer interactions in a supersonic turbine cascade under different inlet Mach numbers

Submission Author: Hugo Felippe da Silva Lui , SP
Co-Authors: Hugo Felippe da Silva Lui, William Wolf, Tulio Rodarte Ricciardi
Presenter: Hugo Felippe da Silva Lui

doi://10.26678/ABCM.COBEM2023.COB2023-0223

EVALUATION OF CONVERGENCE OF VORTEX PANEL METHOD FOR OBTAINING AERODYNAMIC COEFFICIENTS FOR NACA 0012 AIRFOIL

Submission Author: Bernardo Mello Alves , RJ
Co-Authors: Bernardo Mello Alves, VICTOR SANTORO SANTIAGO, André Luiz Tenório Rezende
Presenter: VICTOR SANTORO SANTIAGO

doi://10.26678/ABCM.COBEM2023.COB2023-0046

REVIEW OF THE TRANSITION PHENOMENA OVER SWEPT WINGS

Submission Author: Odenir de Almeida , MG
Co-Authors: CAIO ROBERTO BOTTER, Odenir de Almeida, João Paulo Eguea, Fernando catalano
Presenter: Odenir de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-0371

THE DEVELOPMENT OF A DIDACTIC PLATFORM FOR WIND TUNNEL EXPERIMENTS IN APPLIED AERODYNAMICS

Submission Author: Rafael Dias , SP
Co-Authors: Rafael Dias, Odenir de Almeida
Presenter: Odenir de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-0274

Numerical Study of Airfoil in Near-Stall Conditions

Submission Author: Renan Trevizan de Melo , SP
Co-Authors: Renan Trevizan de Melo, Daniel Sampaio Souza, Elmer Gennaro
Presenter: Renan Trevizan de Melo

doi://10.26678/ABCM.COBEM2023.COB2023-1245

Effects of Freestream Flow Conditions on the Convergence History for Transitional Flow Simulations

Submission Author: Aline Righi , SP
Co-Authors: Aline Righi, Gustavo Luiz Olichevis Halila, João Luiz F. Azevedo
Presenter: Gustavo Luiz Olichevis Halila

doi://10.26678/ABCM.COBEM2023.COB2023-1159

AERODYNAMIC ANALYSIS APPLIED TO A HYPERSONIC VEHICLE TYPE WAVERIDER THROUGH CFD

Submission Author: Rolando Guzmán-Bohórquez , SP
Co-Authors: Rolando Guzmán-Bohórquez, Paulo Greco, Hernán Cerón-Muñoz
Presenter: Rolando Guzmán-Bohórquez

doi://10.26678/ABCM.COBEM2023.COB2023-2028

STABILITY ANALYSIS OF BOUNDARY LAYER FLOW IN HIGH ASPECT RATIO GAP UNDER BYPASS TRANSITION CONDITIONS.

Submission Author: Henrique Teixeira , SP
Co-Authors: Henrique Teixeira, Marcello Augusto Faraco de Medeiros, Victor Barcelos Victorino, Felipe Oliveira Aguirre
Presenter: Victor Barcelos Victorino

doi://10.26678/ABCM.COBEM2023.COB2023-2275

Design Performance Optimization of Scaled Rotary Blades for Additive Manufacturing

Submission Author: Giulia Derneka Maccarone , SP
Co-Authors: Giulia Derneka Maccarone, Daniel Sampaio Souza, Marcelo Jorge Filho, Carlos Pagani, Murilo Sartorato
Presenter: Giulia Derneka Maccarone

doi://10.26678/ABCM.COBEM2023.COB2023-1885

Design and parameters impact evaluation on the performance of an eVTOL aircraft

Submission Author: Gabriel Gomes de Souza , MG
Co-Authors: Gabriel Gomes de Souza, Higor Luis Silva
Presenter: Gabriel Gomes de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-1641

Aerospace Structures 5

Computational tool for preliminary eigenvalues analysis of wind turbine blades

Submission Author: Júlia da Silva Maschietto , SP
Co-Authors: Júlia da Silva Maschietto, Antonio Cândido Faleiros, Juan Pablo Julca Avila
Presenter: Júlia da Silva Maschietto

doi://10.26678/ABCM.COBEM2023.COB2023-1087

Structural optimization of the fuselage hull of a composite ground effect vehicle

Submission Author: Felipe Araújo Bortolete , SP
Co-Authors: Felipe Araújo Bortolete, Lucas Souza, Manuel Alejandro Rodriguez Diaz, Ney Rafael Secco
Presenter: Felipe Araújo Bortolete

doi://10.26678/ABCM.COBEM2023.COB2023-1568

PRELIMINARY STUDY OF A SPACE MISSION FOR OBSERVING PLASMA BUBBLES IN THE IONOSPHERE USING GNSS-RO

Submission Author: Vinicius Fernandes , SP
Co-Authors: Vinicius Fernandes, Rogério Pirk, Willer Gomes dos Santos
Presenter: Vinicius Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-0191

Assessment of truss-based modular structures in the wingbox structural design of commercial aircraft

Submission Author: Pedro Davim Bastos , MG
Co-Authors: Pedro Davim Bastos, Higor Luis Silva
Presenter: Pedro Davim Bastos

doi://10.26678/ABCM.COBEM2023.COB2023-0352

Conceptual design of the thrust vector control system for a hybrid rocket engine

Submission Author: Olexiy Shynkarenko , DF
Co-Authors: Olexiy Shynkarenko, Luís Guilherme Julião Simões, Lucas Vinícius de Souza Nascimento, Danielle Lima Bezerra, Rodrigo Evangelista Aguiar de Souza, Maurício Sá Gontijo, Jungpyo Lee, Artur Elias De Morais Bertoldi
Presenter: Patrick Christian de Melo

doi://10.26678/ABCM.COBEM2023.COB2023-2035

Control Systems and Aeroelasticity 6

Comparing classic to novel flight control approaches to fixed-wing aircraft: feedback control versus Reinforcement Learning

Submission Author: Joao Erick Fernandes , RJ
Co-Authors: Joao Erick Fernandes, Flavio Luiz Cardoso-Ribeiro
Presenter: Joao Erick Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-0896

Investigation of the effects of structural nonlinearities on aeroelastic LCOs

Submission Author: Lucas Pereira Resende , DF
Co-Authors: Lucas Pereira Resende, Polliana Martins
Presenter: Lucas Pereira Resende

doi://10.26678/ABCM.COBEM2023.COB2023-1991

Study of a nonlinear aeroelastic model with combined SMA-based structural hysteresis and dynamic stall

Submission Author: Vagner Candido de Sousa , SP
Co-Authors: Lucas Victorelli Caravita, Luís Felipe Moreira da Silva Cassales, Giovanne Sooma Assunção Silva, Vagner Candido de Sousa
Presenter: Vagner Candido de Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-0054

PID CONTROL SYSTEM IN 3 AXES FOR STABILITY OF A MODEL AIRCRAFT IN A WIND TUNNEL

Submission Author: Bruno Petrocchi de Sena Azevedo , MG
Co-Authors: Arthur Pereira, Bruno Petrocchi de Sena Azevedo, Daniel Miranda, Isabelle Franco , Matheus Lucas Monteiro de Sales Pereira, ROSELY CAMPOS, Fernando Basílio Felix, Guilherme Papini
Presenter: Bruno Petrocchi de Sena Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-0243

Effects of Rational-Function Approximation Coefficients on the Aeroelastic Analysis of Transonic Flutter with CFD-Based Reduced-Order Model

Submission Author: Ana Cristina Neves Carloni , SP
Co-Authors: Ana Cristina Neves Carloni, João Luiz F. Azevedo
Presenter: Ana Cristina Neves Carloni

doi://10.26678/ABCM.COBEM2023.COB2023-0147

Attitude Determination and Control of a Nanosatellite Detector of Cosmic Sources of X and Gamma Rays

Submission Author: Matheus Soares , SP
Co-Authors: Matheus Soares, Luiz de Siqueira Martins Filho, Leandro Baroni, Otavio Durão, VALTER SCHAD
Presenter: Matheus Soares

doi://10.26678/ABCM.COBEM2023.COB2023-0647

Flight Dynamics 6

Flight Campaign Analysis of a Flexible Wing UAV for Studying Flexible Aircraft Dynamics

Submission Author: Vítor Fernandes , SP
Co-Authors: Vítor Fernandes, Thiago Rosado de Paula, Rodrigo Costa do Nascimento, Luiz Carlos Góes, ROBERTO GIL ANNES DA SILVA, Alain Souza
Presenter: Vítor Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-2302

STUDY OF APPROXIMATION MANEUVERS WITH CLOSED-LOOP CONTROL FOR A SPACECRAFT OVER ASTEROIDS

Submission Author: Luan Henrique Glasser , SP
Co-Authors: Luan Henrique Glasser, Evandro Marconi Rocco, Marcelo Lisboa Mota
Presenter: Luan Henrique Glasser

doi://10.26678/ABCM.COBEM2023.COB2023-2259

PASSIVE FAULT TOLERANT CONTROL ON QUADROTORS USING A ROBUST SLIDING MODE CONTROL

Submission Author: yohan diaz , MG
Co-Authors: Paulo Henrique Arruda, Pedro Henrique Rodrigues, Leandro Diniz de Jesus, yohan diaz
Presenter: yohan diaz

doi://10.26678/ABCM.COBEM2023.COB2023-0676

Identification of aerodynamic coefficients of a flexible fixed-wing aircraft using deep learning

Submission Author: Rodrigo Costa do Nascimento , SP
Co-Authors: Rodrigo Costa do Nascimento, Éder Alves de Moura, Thiago Rosado de Paula, Vítor Fernandes, Luiz Carlos Góes, ROBERTO GIL ANNES DA SILVA
Presenter: Vítor Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-2314

Quadrotor Fault Detection and Diagnosis using Multi-class Support Vector Machine

Submission Author: yohan diaz , MG
Co-Authors: Petrus Fiore, yohan diaz, Guilherme Ferreira Gomes
Presenter: yohan diaz

doi://10.26678/ABCM.COBEM2023.COB2023-0179

Development of a subscale aircraft of a Cessna 177

Submission Author: Clécio Fischer , SP
Co-Authors: Clécio Fischer, Éder Alves de Moura, ROBERTO GIL ANNES DA SILVA, Luiz Carlos Góes
Presenter: Clécio Fischer

doi://10.26678/ABCM.COBEM2023.COB2023-1535

Propulsion 18

Performance parameters, economic viability and sustainability of hybrid rocket propellants: a systematic review

Submission Author: Paulo Brandão , DF
Co-Authors: Paulo Brandão, Carlos Veras, EDGAR AMARAL SILVEIRA
Presenter: Paulo Brandão

doi://10.26678/ABCM.COBEM2023.COB2023-0414

The Effects of Controlled Iron Oxide, Aluminum Particles, and Crimson Powder Addition on Solid Propellants

Submission Author: Matheus Klement , SC
Co-Authors: Matheus Klement, Miguel Daehn Ribeiro, Richard Nakka, Cesar Addis Valverde Salvador
Presenter: Matheus Klement

doi://10.26678/ABCM.COBEM2023.COB2023-1982

Modeling an electrospray propulsion system using an open-source Smoothed Particle Hydrodynamics method

Submission Author: Diogo Leon Oliveira Soares , SP
Co-Authors: Marcelo dos Santos Ferreira, Marco Antonio Gontijo Piantino, Ricardo Adriano, Diogo Leon Oliveira Soares, Alexandre Ramos Fonseca
Presenter: Marco Antonio Gontijo Piantino

doi://10.26678/ABCM.COBEM2023.COB2023-0394

Aerodynamic performance analysis of a propeller projected for low-speed unmanned aerial vehicles

Submission Author: Luís Gonçalves , BA
Co-Authors: Luís Gonçalves, Luis Barreto, José de Medeiros
Presenter: Luís Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-0637

Scramjet thrust analysis based on the variation of its compression section angle

Submission Author: Laura Carolina Monteiro dos Santos Rodrigues da Silva , SP
Co-Authors: Laura Carolina Monteiro dos Santos Rodrigues da Silva, Valéria Leite
Presenter: Laura Carolina Monteiro dos Santos Rodrigues da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1036

Modeling a dynamical system from low-sampled data

Submission Author: Davi Saadi de Almeida Lettieri , RJ
Co-Authors: Davi Saadi de Almeida Lettieri, Leonardo Santos de Brito Alves
Presenter: Davi Saadi de Almeida Lettieri

doi://10.26678/ABCM.COBEM2023.COB2023-1366

On the Prediction of Propeller Tonal Noise with Machine Learning

Submission Author: Pedro Henrique de Carvalho , TO
Co-Authors: Pedro Henrique de Carvalho, Rafael Cuenca, Filipe Dutra da Silva
Presenter: Filipe Dutra da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1717

Numerical Characterization and Analysis of the Chemical Kinetics of the Mixture of Silane, Hydrogen and Air for Supersonic Combustion Applications

Submission Author: Rafael Maia Altafim , SP
Co-Authors: Rafael Maia Altafim, Loreto Pizzuti, Alexandre Costa Goulart
Presenter: Loreto Pizzuti

doi://10.26678/ABCM.COBEM2023.COB2023-1025

Numerical simulations of the helicon plasma thruster experiment under different magnetic configurations

Submission Author: Renan Almeida de Souza , DF
Co-Authors: Ricardo Miranda, José Ferreira
Presenter: Renan Almeida de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-2433

COMBUSTION SIMULATION OF A PARAFFIN BASED SOLID FUEL WITH GASEOUS OXYGEN INSIDE A HYBRID ROCKET MOTOR

Submission Author: Paulo Gabriel Cunha Martins , SP
Co-Authors: Paulo Gabriel Cunha Martins, Rene Gonçalves, Leonardo Henrique Gouvêa, Cristiane Aparecida Martins
Presenter: Paulo Gabriel Cunha Martins

doi://10.26678/ABCM.COBEM2023.COB2023-2133

OPTIMAL PREPROCESSING FOR PROPER ORTHOGONAL DECOMPOSITION OF THE OSCILLATORY METHANE JET DIFFUSION FLAMES DATASET

Submission Author: Fernanda Spilotros Costa Cordeiro , RJ
Co-Authors: Fernanda Spilotros Costa Cordeiro, Leonardo Santos de Brito Alves, Davi Saadi de Almeida Lettieri
Presenter: Davi Saadi de Almeida Lettieri

doi://10.26678/ABCM.COBEM2023.COB2023-1426

One-Dimensional Numerical Analysis of a 5 kN Liquid Propellant Rocket Engine Combustion Chamber Using Ethanol/LOX

Submission Author: Cesar Addis Valverde Salvador , RS
Co-Authors: Luiz Henrique Schaffazick, Cesar Addis Valverde Salvador, FERNANDO DE SOUZA COSTA, Marcio Teixeira de Mendonca
Presenter: Luiz Henrique Schaffazick

doi://10.26678/ABCM.COBEM2023.COB2023-0675

SUSTAINABLE AVIATION FUELS: A DEVELOPMENT OVERVIEW AND PERFORMANCE EVALUATION ON AERONAUTICAL ENGINES

Submission Author: Paulo Silva , MG
Co-Authors: Marcelo Roberti Rocha Fantaguzzi, Paulo Silva, Gabriel Rocha Pinto, Juliana Primo Basílio de Souza, Luiz Henrique Jorge Machado
Presenter: Marcelo Roberti Rocha Fantaguzzi

doi://10.26678/ABCM.COBEM2023.COB2023-0960

Analytical and Numerical Determination of Acoustic Modes of 25 kN Liquid Propellant Rocket Engine

Submission Author: Maurício Sá Gontijo , DF
Co-Authors: Maurício Sá Gontijo, Mateus Sant'Ana, Priscila Yamada, Renato Filho, Anieli Schrammel, Olexiy Shynkarenko, Jungpyo Lee, Artur Elias De Morais Bertoldi
Presenter: Anieli Schrammel

doi://10.26678/ABCM.COBEM2023.COB2023-1464

Performance analysis of an additive-manufactured propylene-fed electrothermal thruster for small satellites

Submission Author: Eduardo Seiji Suguimoto Miyazato Ferrer , SP
Co-Authors: Eduardo Seiji Suguimoto Miyazato Ferrer, FERNANDO DE SOUZA COSTA
Presenter: Eduardo Seiji Suguimoto Miyazato Ferrer

doi://10.26678/ABCM.COBEM2023.COB2023-2341

Numerical Study of a Regenerative Cooling Jacket in a Scramjet Inlet

Submission Author: Guilherme Borges Ribeiro , SP
Co-Authors: marco antonio Santos, Guilherme Borges Ribeiro
Presenter: marco antonio Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0400

Numerical Simulation of Ethanol and Hydrogen Peroxide Combustion in a Rocket Chamber

Submission Author: Marcio Teixeira de Mendonca , SP
Co-Authors: Erykson Marconny da Silva Costa, Marcio Teixeira de Mendonca, Cesar Addis Valverde Salvador, Luiz Henrique Schaffazick, FERNANDO DE SOUZA COSTA
Presenter: Luiz Henrique Schaffazick

doi://10.26678/ABCM.COBEM2023.COB2023-0118

Preliminary Design of a 25 kN Pressure-Fed Liquid Propellant Rocket Engine

Submission Author: Maurício Sá Gontijo , DF
Co-Authors: Maurício Sá Gontijo, Renato Filho, Anieli Schrammel, Olexiy Shynkarenko, Jungpyo Lee, Artur Elias De Morais Bertoldi
Presenter: Anieli Schrammel

doi://10.26678/ABCM.COBEM2023.COB2023-1931

Bioengineering

Biofluids Dynamics e Bioheat Transfer 11

DEVELOPMENT OF A METHODOLOGY FOR UTILIZING INFRARED IMAGING TO ANALYZE THERMAL RESPONSE AND DIAGNOSE BREAST CANCER

Submission Author: Thomas Holzmann , PR
Co-Authors: Thomas Holzmann, Ana Clara Saccol, Beatriz Jacob Furlan, Yasmin Pereira Buabssi, Carlos Dalmaso Neto, JOSÉ VIRIATO COELHO VARGAS
Presenter: Thomas Holzmann

doi://10.26678/ABCM.COBEM2023.COB2023-0297

Parameter identification in bioheat transfer models using the transitional Markov Chain Monte Carlo method

Submission Author: Eduardo Cunha Classe , RJ
Co-Authors: Eduardo Cunha Classe, Luiz A. S. Abreu, Diego Knupp, Leonardo Stutz, Lucas Asth
Presenter: Eduardo Cunha Classe

doi://10.26678/ABCM.COBEM2023.COB2023-0635

Development of a Device for Iliac Vein Clot Removal

Submission Author: Vitória Bento Botelho , SP
Co-Authors: Amanda Fernandes, Vitória Bento Botelho, Gabriel Felipe de Faria, Luiz Brumati, João de Sá Brasil Lima
Presenter: Vitória Bento Botelho

doi://10.26678/ABCM.COBEM2023.COB2023-0599

A comparison study between high-fidelity and mid-fidelity models of coronary blood flow simulation

Submission Author: ALEXANDRE COSTA , PR
Co-Authors: Amaury Santos, ALEXANDRE COSTA, Alonso Alvarez, Pablo Blanco
Presenter: Amaury Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0359

CFD analysis of flow and hemocompatibility of straight-bladed impeller Ventricular Assist Devices

Submission Author: Rodrigo Stoeterau , SP
Co-Authors: Rodrigo Stoeterau
Presenter: Rodrigo Stoeterau

doi://10.26678/ABCM.COBEM2023.COB2023-2380

Comparison of Different Mathematical Models for the Evaluation of Hemolytic and Thrombogenic Potentials in Central Venous Access for Hemodialysis

Submission Author: Matheus Carvalho Barbosa Costa , MG
Co-Authors: Matheus Carvalho Barbosa Costa, Saulo Gonçalves, Mário Silva, Thabata Lucas, Rudolf Huebner
Presenter: Matheus Carvalho Barbosa Costa

doi://10.26678/ABCM.COBEM2023.COB2023-0715

Numerical analysis of infrared thermography using hypothermia treatment for early screening of deep and superficial breast cancer

Submission Author: Tarcio Cardoso , MG
Co-Authors: Tarcio Cardoso, Mateus Felipe Benicio Moraes, Alisson Figueiredo
Presenter: Mateus Felipe Benicio Moraes

doi://10.26678/ABCM.COBEM2023.COB2023-2237

Influence of thermal contrast during dynamic thermography on a deep-learning-based estimation of breast tumour parameters

Submission Author: Mateus Felipe Benicio Moraes , MA
Co-Authors: Mateus Felipe Benicio Moraes, Tarcio Cardoso, Alisson Figueiredo
Presenter: Mateus Felipe Benicio Moraes

doi://10.26678/ABCM.COBEM2023.COB2023-1244

Analysis of the study performed with CFD software in veins submitted to valvulopathies

Submission Author: Mariana de Paula Souza , MG
Co-Authors: Mariana de Paula Souza, Isabela Vieira Soares, João Vitor Azevedo Silva, Estefany de Almeida Freitas, Cristiana Brasil Maia
Presenter: Mariana de Paula Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0955

A Systematic Literatures Review on the use of fluid-structure interaction simulation for systems of blood flow through arteries with stents

Submission Author: Endel Ferraz , RS
Co-Authors: Endel Ferraz, Kristian Nascimento Telöken, Isadora Ghisleni, Julia Lenz Goetz, Flavia Zinani
Presenter: Kristian Nascimento Telöken

doi://10.26678/ABCM.COBEM2023.COB2023-2127

Development of a device for analyzing the functionality of N95 respirators regarding the efficiency of the filtering fiber

Submission Author: Claysson Vimieiro , MG
Co-Authors: João Victor Felisberto, João Grego, Mateus Giori, Saulo Gonçalves, Guilherme de Paula Rúbio, Rudolf Huebner, Viviane Vimieiro, Claysson Vimieiro
Presenter: Claysson Vimieiro

doi://10.26678/ABCM.COBEM2023.COB2023-1229

Biomaterials and Biotribology 3

Production of alumina and zirconia composite filaments for 3D printing of scaffolds by Fused Filament Fabrication process

Submission Author: Jadna Catafesta , RS
Co-Authors: Maíra Faccio, Jadna Catafesta, Janete Zorzi, Carlos Alberto Costa
Presenter: Jadna Catafesta

doi://10.26678/ABCM.COBEM2023.COB2023-1385

Study of the tribological behaviour of a stainless-steel used in biomedical applications conducted with laser under different frequencies

Submission Author: Ronaldo Cozza , SP
Co-Authors: Giovanna Bernardes, Marcelo Macedo, Samuel Monteiro , Vikas Verma, Jorge Humberto Luna Dominguez, Ronaldo Cozza
Presenter: Ronaldo Cozza

doi://10.26678/ABCM.COBEM2023.COB2023-0027

Fabrication of multi-scale periodic line-like structures on different implant materials using a two- beam interference setup equipped with a pico-second laser source

Submission Author: Bruno Alexandre Pacheco de Castro Henriques , SC
Co-Authors: Bruno Alexandre Pacheco de Castro Henriques, Bogdan Voisiat, Douglas Fabris, Andres Lasagni
Presenter: Bruno Alexandre Pacheco de Castro Henriques

doi://10.26678/ABCM.COBEM2023.COB2023-2421

Biomechanics 25

On the mechanics of ruptured and unruptured intracranial aneurysms: numerically assessing how different properties may affect their mechanical behavior

Submission Author: Iago Lessa Oliveira , SP
Co-Authors: Iago Lessa Oliveira, Carlos Baccin , José Luiz Gasche
Presenter: Iago Lessa Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0240

ACTIVATION OF BONE MASS MAINTENANCE THROUGH INTRAMEDULLARY NAIL DYNAMIZATION

Submission Author: Paulo Pedro Kenedi , RJ
Co-Authors: Jose Renato de Oliveira e Silva Neto, Paulo Pedro Kenedi, Rodrigo Ribeiro Pinho Rodarte, Lucas Vignoli
Presenter: Jose Renato de Oliveira e Silva Neto

doi://10.26678/ABCM.COBEM2023.COB2023-0889

Assessing the Joint Misalignment Effects in Rehabilitation Robotics: A Case Study

Submission Author: jonathan campo , SP
Co-Authors: jonathan campo, Gabriel Patti Sanches Coelho, Adriano Siqueira
Presenter: Gabriel Patti Sanches Coelho

doi://10.26678/ABCM.COBEM2023.COB2023-1784

Influence of Thickness on Flutter in Prosthetic Biological Heart Valves

Submission Author: Matheus Carvalho Barbosa Costa , MG
Co-Authors: Matheus Carvalho Barbosa Costa, Joao Fleury, Saulo Gonçalves, Mário Silva, Rudolf Huebner, Artur Avelar
Presenter: Saulo Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-0372

Effect of anisotropy of zirconia pins produced by additive manufacturing on the wear resistance.

Submission Author: Giovanna Rubo de Rezende , SP
Co-Authors: Giovanna Rubo de Rezende, Carlos Fortulan, Italo Leite de Camargo
Presenter: Giovanna Rubo de Rezende

doi://10.26678/ABCM.COBEM2023.COB2023-0982

FLOW ANALYSIS IN A FLEXIBLE ARTERIOVENOUS FISTULA MODEL

Submission Author: Sabrina Machado Santos , RN
Co-Authors: Sabrina Machado Santos, Jonhattan Ferreira Rangel, Willyam Brito de Almeida Santos, Lucas Penha, Kleiber Lima de Bessa
Presenter: Sabrina Machado Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1012

Development of a Test Bench for Frame Running (PETRA): Load Conditions Analysis and Characterization

Submission Author: Frederico Sousa Santos , MG
Co-Authors: Frederico Sousa Santos, João Marcos Xavier, Márcio Peres de Souza, Diego Augusto Costa Alves, CLEUDMAR ARAÚJO, Juliana Cardoso Braga
Presenter: Frederico Sousa Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2263

Development of a High-Speed Camera-Based Software for Characterization of Vibrational Motion in Cardiac Valves

Submission Author: Ana Raquel Linhares Bello de Araújo , MG
Co-Authors: Ana Raquel Linhares Bello de Araújo , Vinicius Moreira Cabral, Matheus Carvalho Barbosa Costa, Joao Fleury, Saulo Gonçalves, Artur Avelar, Rudolf Huebner
Presenter: Saulo Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-0614

Difficulties and benefits of modeling the Achilles tendon using FEM

Submission Author: Otávio Teixeira Pinto , SC
Co-Authors: Otávio Teixeira Pinto, Bruno Klahr, José Luís Medeiros Thiesen, Thiago André Carniel, Eduardo Fancello
Presenter: Otávio Teixeira Pinto

doi://10.26678/ABCM.COBEM2023.COB2023-1204

influence of tissue stiffness on leaflet oscillation dynamics during a cardiac cycle.

Submission Author: Joao Fleury , MG
Co-Authors: Joao Fleury, Matheus Carvalho Barbosa Costa, Saulo Gonçalves, Mário Silva, Rudolf Huebner
Presenter: Saulo Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-0375

Numerical vibration analysis of the human middle ear implanted with a vibration sensor and a flat flexible cable for electrical connection

Submission Author: Vinicius Paegle , SC
Co-Authors: Vinicius Paegle, Stephan Paul

doi://10.26678/ABCM.COBEM2023.COB2023-1084

COMPARATIVE ANALYSIS OF THE BIOMECHANICAL BEHAVIOR OF TWO TYPES OF SOLUTIONS USED FOR THE TREATMENT OF BUSH-HOFFA FRACTURES

Submission Author: João Marcos Guimarães Rabelo , MG
Co-Authors: João Marcos Guimarães Rabelo, Robinson Esteves Pires, Estevam Barbosa de Las Casas, Armando Pereira, Raphael Lúcio Reis dos Santos, Carlos Alberto Cimini Junior
Presenter: João Marcos Guimarães Rabelo

doi://10.26678/ABCM.COBEM2023.COB2023-0667

Solving optimal control problems applied to neuromusculoskeletal models: a comparison between OpenSim Moco and Fmincon Solvers

Submission Author: Denis César Mosconi Pereira , SP
Co-Authors: Denis César Mosconi Pereira, Adriano Siqueira
Presenter: Adriano Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-0120

How an active orthosis interferes with the movement, muscles recruitment and activations during knee flexion-extension

Submission Author: Denis César Mosconi Pereira , SP
Co-Authors: Denis César Mosconi Pereira, Yecid Moreno, Adriano Siqueira
Presenter: Adriano Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-1514

Sensitivity of Donnan’s model parameters to the modeling of osmotic pressure in tendons

Submission Author: Thiago André Carniel , SC
Co-Authors: Eduarda Bordignon Atuatti, João Paulo Eckert, Thiago André Carniel, Liz Girardi Müller, Samara Cristina Mazon, Micheli Zanetti, Éverton Breitenbach, Márcio Antônio Fiori, Rafael Geronimo, Bruno Klahr, José Luís Medeiros Thiesen, Otávio Teixeira Pinto, Eduardo Fancello
Presenter: Eduarda Bordignon Atuatti

doi://10.26678/ABCM.COBEM2023.COB2023-0788

EVALUATING THE VISCOELASTIC LOAD SHARE OF PORCINE KNEE LIGAMENTS

Submission Author: Paulo Pedro Kenedi , RJ
Co-Authors: Bruno Mello Silveira, Paulo Pedro Kenedi
Presenter: Bruno Mello Silveira

doi://10.26678/ABCM.COBEM2023.COB2023-1093

DESIGN AND KINEMATIC ANALYSIS OF A FLAPPING WING MECHANISM FOR OPTIMIZED BIO-INSPIRED UAV

Submission Author: Maurício Menegatti Andrade , MS
Co-Authors: Maurício Menegatti Andrade, Mariana Finamor Frota Saldanha de Freitas, Augusto Bornschlegell, Rodrigo Borges Santos, Douglas Bueno
Presenter: Rodrigo Borges Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0790

Formulation of a biphasic model considering Donnan's osmotic pressure for investigations of the swelling phenomenon in soft tissues

Submission Author: Rafael Geronimo , PR
Co-Authors: Rafael Geronimo, Bruno Klahr, José Luís Medeiros Thiesen, Otávio Teixeira Pinto, Eduardo Fancello, Thiago André Carniel
Presenter: Bruno Klahr

doi://10.26678/ABCM.COBEM2023.COB2023-1162

DESIGN OF TRANSTIBIAL PROSTHESIS BASED ON MECHANICAL METAMATERIAL

Submission Author: GUILHERME LEBRAO , SP
Co-Authors: GUILHERME LEBRAO, Marcelo Otavio dos Santos , Fernando Malvezzi
Presenter: GUILHERME LEBRAO

doi://10.26678/ABCM.COBEM2023.COB2023-1517

DEVELOPMENT OF AN APPARATUS FOR SIMULTANEOUS MEASUREMENT OF WHOLE-BODY AND HAND-ARM VIBRATION

Submission Author: Mário Fedatto Neto , RS
Co-Authors: Mário Fedatto Neto, Herbert Gomes
Presenter: Leonardo Roso Colpo

doi://10.26678/ABCM.COBEM2023.COB2023-0694

Bipedal human-exoskeleton model for simulations of squat-to-stand movement

Submission Author: Denis César Mosconi Pereira , SP
Co-Authors: Denis César Mosconi Pereira, Adriano Siqueira
Presenter: Adriano Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-0131

COMPARATIVE ANALYSIS OF COMFORT PARAMETERS OF ELEVATORS AFTER INTEGRAL MODERNIZATION PROJECTS

Submission Author: Herbert Gomes , RS
Co-Authors: Herbert Gomes
Presenter: Herbert Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-1951

AUTOMATING THE PROCESS OF GENERATING MICROMOLDS IN COMPUTER-AIDED DESIGN (CAD) FOR USE IN 3D CELL CULTURE

Submission Author: Lívia Helena Martineli Teixeira , SP
Co-Authors: Lívia Helena Martineli Teixeira , Isabelle Miki Ikuno, Dayanna Axly Santiago Villantoy, Marcília Valéria Guimarães, Pedro Noritomi
Presenter: Lívia Helena Martineli Teixeira

doi://10.26678/ABCM.COBEM2023.COB2023-1575

Assessment of neuromuscular fatigue, torque reduction, and velocity performance following FES intervention

Submission Author: Maria Jose Burbano , SP
Co-Authors: Maria Jose Burbano, Yecid Moreno, Gabriel Patti Sanches Coelho, Felix Mauricio Escalante Ortega, Adriano Siqueira
Presenter: Maria Jose Burbano

doi://10.26678/ABCM.COBEM2023.COB2023-1958

ANALYSIS OF THE PRESSURE FIELD IN ARTERIOVENOUS FISTULA

Submission Author: Lucas Penha , RN
Co-Authors: Lucas Penha, Willyam Brito de Almeida Santos, Jonhattan Ferreira Rangel, Sabrina Machado Santos, Allan Santos, Kleiber Lima de Bessa
Presenter: Lucas Penha

doi://10.26678/ABCM.COBEM2023.COB2023-0682

Implants, Orthoses and Prostheses 10

Development of an Instrumented Object to be used in a new Upper Limb Prosthesis Training Protocol

Submission Author: Pedro de Figueiredo Abissamra , SP
Co-Authors: Pedro de Figueiredo Abissamra, Jean Mendes Nascimento, Ana Carolina Rodrigues da Silva, Paulo Marcos AGUIAR
Presenter: Pedro de Figueiredo Abissamra

doi://10.26678/ABCM.COBEM2023.COB2023-1919

DEVELOPMENT OF A FINITE ELEMENT MODEL OF THE THORACOLUMBAR SPINE FOR THE INVESTIGATION OF VERTEBRAL BODY TETHERING INSTRUMENTATION

Submission Author: Rafael Carreira Oliveira , SP
Co-Authors: Rafael Carreira Oliveira, Luis Fernando Nicolini, Eduardo Fancello, Carlos Rodrigo de Mello Roesler, Marx Ribeiro
Presenter: Rafael Carreira Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-1265

Manufacture of bone fracture stabilizing plates in biocomposite by resin infusion and by Hand Lay Up: a comparison

Submission Author: João Pedro Costa Eliziário , PR
Co-Authors: andrevidy honório, João Pedro Costa Eliziário, Paulo Durigan, Romeu Rony Cavalcante da Costa, Sandra Mara Domiciano
Presenter: andrevidy honório

doi://10.26678/ABCM.COBEM2023.COB2023-2255

THREE-DIMENSIONAL IMPRESSION OF MODELS OF THE HUMAN MANDIBLE AND MANDIBULAR IMPLANTS

Submission Author: Felipe Estevão da Silva , MS
Co-Authors: Felipe Estevão da Silva, André Crivellaro, André Boregio Madey, Rafael Gregolin, Bruno Fontoura da Silva Colman, Ruís Camargo Tokimatsu
Presenter: Felipe Estevão da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0137

CONSTRUCTION AND EXECUTION OF A MECHANICAL FEASIBILITY STUDY IN FEM IN AN OPEN SOURCE PROSTHESIS

Submission Author: Rodrigo Romero , MG
Co-Authors: Rodrigo Romero, Paulo Henrique Rodrigues Guilherme Reis, Kliftom Amorim Costa, Matheus Madureira Mauro, Melissa Souza Antunes, Claysson Vimieiro
Presenter: Claysson Vimieiro

doi://10.26678/ABCM.COBEM2023.COB2023-1506

Evaluation of the microhardness of different 3D printing resins for denture base

Submission Author: Ana Paula MACEDO , SP
Co-Authors: Ana Paula MACEDO, Sarah Ribeiro Cruz Araújo, Milena Moreira Lima , Anselmo Agostinho Simionato, Valéria Pagnano, Rossana Almeida
Presenter: Ana Paula MACEDO

doi://10.26678/ABCM.COBEM2023.COB2023-1905

DESIGN AND CONSTRUCTION OF A CUSTOM IMPLANT OF THE TEMPOROMANDIBULAR JOINT PRODUCED BY ADDITIVE MANUFACTURING IN TITANIUM ALLOY FROM COMPUTED TOMOGRAPHY

Submission Author: Rafael Gregolin , MS
Co-Authors: Rafael Gregolin, Felipe Estevão da Silva, Reginaldo Ribeiro Sousa, Cecilia Zavaglia, Ruís Camargo Tokimatsu, Joao Pereira
Presenter: Rafael Gregolin

doi://10.26678/ABCM.COBEM2023.COB2023-0111

ASTM F67 TITANIUM ANODIZING TO IMPROVE OSSEOINTEGRATION FOR DENTAL IMPLANTS

Submission Author: Wellington Elioenae do Nascimento , SP
Co-Authors: Wellington Elioenae do Nascimento, CARLOS PICONE, Juno Gallego
Presenter: Wellington Elioenae do Nascimento

doi://10.26678/ABCM.COBEM2023.COB2023-0228

Manufacturing and Analysis of a Heat-Activated Staple Using Ti-Ni-Cu Shape Memory Alloy

Submission Author: Anna Beatriz de Araújo Pereira , PB
Co-Authors: Anna Beatriz de Araújo Pereira, Paulo César Sales da Silva, Ícaro Carvalho Dourado, Carlos Jose de Araujo
Presenter: Carlos Jose de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-0870

FINITE ELEMENT ANALYSIS OF THE MECHANICAL STRUCTURE OF AN HYBRID ORTHOSIS

Submission Author: Francielle Paz , MG
Co-Authors: Francielle Paz, Arthur Caetano, Matheus Carvalho Barbosa Costa, João Paulo Fernandes Bonfim, Guilherme de Paula Rúbio, Fernanda Márcia Rodrigues Martins Ferreira, Lucas Oliveira da Fonseca, HENRIQUE MARTINS, Claysson Vimieiro
Presenter: Francielle Paz

doi://10.26678/ABCM.COBEM2023.COB2023-1326

Medical Devices 6

Influence of the screw raw material and surface topography on mechanical behavior of Morse Taper Dental implant systems

Submission Author: Rafaela Lopes da Silva , PR
Co-Authors: Rafaela Lopes da Silva, Giuseppe Pintaude
Presenter: Rafaela Lopes da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2251

Analysis on the effect of connecting links in the foreshortening of a bioabsorbable stent for the treatment of Aorta Coarctation in Children: a Finite element study

Submission Author: Flávio Santos , SP
Co-Authors: Flávio Santos, Bruno Agostinho Hernandez, Marcel Machado, ROSANA SANTOS, Aron Andrade, EDSON CAPELLO SOUSA
Presenter: Bruno Agostinho Hernandez

doi://10.26678/ABCM.COBEM2023.COB2023-0379

AUTOMATING VIRTUAL ORAL AND MAXILLOFACIAL SURGICAL PLANNING: DEVELOPMENT OF AN INTERFACE WITH PYTHON IN OPEN-SOURCE SOFTWARE

Submission Author: Dayanna Axly Santiago Villantoy , SP
Co-Authors: Dayanna Axly Santiago Villantoy, Lívia Helena Martineli Teixeira , Marcília Valéria Guimarães, Pedro Noritomi, Denize Novais
Presenter: Dayanna Axly Santiago Villantoy

doi://10.26678/ABCM.COBEM2023.COB2023-0754

Numerical simulation of drug transport from Drug-Eluting stents through the arterial wall with an atheroma plaque

Submission Author: Rachel Manhães de Lucena , RJ
Co-Authors: Haroldo Rosman Junior, Hyun Ho Shin, Rachel Manhães de Lucena, José da Rocha Miranda Pontes, Norberto Mangiavacchi, Sean McGinty
Presenter: Rachel Manhães de Lucena

doi://10.26678/ABCM.COBEM2023.COB2023-1671

Nuclear Magnetic Resonance Image Reconstruction Using Reconfigurable Simulated System

Submission Author: Amauri da Costa Júnior , DF
Co-Authors: Amauri da Costa Júnior, Gerardo Pizo
Presenter: Amauri da Costa Júnior

doi://10.26678/ABCM.COBEM2023.COB2023-1502

DESIGN, MANUFACTURE AND TESTS OF AN EXPERIMENTAL PULSATILE FLOW BENCH

Submission Author: Pedro Eduardo Oliveira de Andrade , PB
Co-Authors: Emerson Jeronimo, Pedro Eduardo Oliveira de Andrade, Leonardo Pereira de Lucena Silva, Francisco Augusto Vieira da Silva, JOAB ANDRADE, Wanderley Amorim Júnior
Presenter: Pedro Eduardo Oliveira de Andrade

doi://10.26678/ABCM.COBEM2023.COB2023-2309

Combustion

Chemical Kinetics and Modeling 3

KINETIC PARAMETERS AND COMBUSTION THERMAL BEHAVIOR OF AÇAÍ FIBROUS SEED BY THERMOGRAVIMETRIC ANALYSIS

Submission Author: Fernando Henrique de Barbosa dos Santos , PA
Co-Authors: Fernando Henrique de Barbosa dos Santos, Alan Carneiro, Ana Paula Mattos, Danielle R S Guerra, Manoel Fernandes Martins Nogueira
Presenter: Fernando Henrique de Barbosa dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2146

ISOCONVERSIONAL MODELING FOR DETERMINING PYROLYSIS KINETIC AND THERMODYNAMIC PARAMETERS OF BIOMASS RESIDUES

Submission Author: Mayara Gabi Moreira , DF
Co-Authors: Mayara Gabi Moreira, Giulia Lamas, EDGAR AMARAL SILVEIRA, Pedro Oliveira
Presenter: Mayara Gabi Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-0904

Sensitivity analysis of a numerical model to predict polarization curves of a solid oxide fuel cell and comparison with experimental results

Submission Author: Guilherme Pickler , SC
Co-Authors: Guilherme Pickler, Rafael de Camargo Catapan, Amir Antonio Martins Oliveira
Presenter: Guilherme Pickler

doi://10.26678/ABCM.COBEM2023.COB2023-0890

Combustion, Pyrolisis and Gasification of Solids and Liquids 5

Implementation of the Taguchi method in the torrefaction of rice husk biomass

Submission Author: Maristela Ribeiro de Oliveira , SP
Co-Authors: Maristela Ribeiro de Oliveira, Ivonete Ávila, Miriam Ricciulli de Oliveira
Presenter: Maristela Ribeiro de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0154

HETEROGENEOUS REACTING SYSTEM EVALUATION BY CFD MODEL OF SEMI INDUSTRIAL SCALE GASIFIER IN FLUIDIZED-BED

Submission Author: Vitor Alberto Lemes Monteiro , MG
Co-Authors: Vitor Alberto Lemes Monteiro, Marcelo Braga dos Santos, Alam Trovó, Solidônio Carvalho
Presenter: Marcelo Braga dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0469

Evaluation of dolomite as a catalyst in the IN-SITU catalytic pyrolysis of sugarcane bagasse

Submission Author: Ana Helena Campos Pereira , SP
Co-Authors: Ana Helena Campos Pereira, Kayky da Silva Obnesorg , Bruna de Jesus Bueno Machado, Gretta Larisa Aurora Arce Ferrufino, Ivonete Ávila, Carlos Manuel Romero Luna, Nicole Musielak
Presenter: Ana Helena Campos Pereira

doi://10.26678/ABCM.COBEM2023.COB2023-1980

PYROLYSIS OF SUGARCANE BAGASSE CHEMICALLY TREATED WITH CITRIC ACID

Submission Author: Kayky da Silva Obnesorg , SP
Co-Authors: Kayky da Silva Obnesorg , Lyara Maria Morais Andrade, Ana Helena Campos Pereira, Bruna de Jesus Bueno Machado, Gretta Larisa Aurora Arce Ferrufino, Carlos Manuel Romero Luna
Presenter: Kayky da Silva Obnesorg

doi://10.26678/ABCM.COBEM2023.COB2023-1407

Comparison of temperature profiles and molar composition in the gasification of petroleum sludge.

Submission Author: Hiago David Zogbi Silva Oliveira , RJ
Co-Authors: Hiago David Zogbi Silva Oliveira, Leandro Alcoforado Sphaier, Isabela Florindo Pinheiro, York Castillo Santiago
Presenter: Hiago David Zogbi Silva Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0159

Emissions 4

MODELING EMISSIONS BY CHEMICAL KINETICS TO A GENSET WITH BLENDS OF DIESEL/BIODIESEL

Submission Author: João Barbosa , PR
Co-Authors: João Barbosa, Carlos Henrique Matiolo, JOSÉ VIRIATO COELHO VARGAS, Wellington Balmant, Rodrigo César Raimundo, Dhyogo Miléo Taher, Flávio Júnior Santiago Silva, Matheus Cunha, Juliano Moreira Maurer, André Bellin Mariano
Presenter: Carlos Henrique Matiolo

doi://10.26678/ABCM.COBEM2023.COB2023-1606

Assessment of the Impacts of Vehicular Emissions on Air Quality

Submission Author: Ronaldo Cozza , SP
Co-Authors: Arzoo Verma, Ronaldo Cozza, Vikas Verma
Presenter: Ronaldo Cozza

doi://10.26678/ABCM.COBEM2023.COB2023-0048

Ecological efficiency of compression ignition engine using diesel, biodiesel and HVO

Submission Author: Nelly Vanessa Pérez Rangel , MG
Co-Authors: Nelly Vanessa Pérez Rangel, Cesar Adolfo Sotomonte, Christian Jeremi R. Coronado
Presenter: Nelly Vanessa Pérez Rangel

doi://10.26678/ABCM.COBEM2023.COB2023-0873

EVALUATION OF HEAT TRANSFER MODELS IN THE LCA OF BIOMETHANE, ETHANOL, GH2, AND GASOLINE IN BRAZIL

Submission Author: Felipe Diniz , MG
Co-Authors: Felipe Diniz, Ana Paula Mattos, Gueber Elias Mendes Santos Júnior
Presenter: Felipe Diniz

doi://10.26678/ABCM.COBEM2023.COB2023-0440

Fire Science and Technology 2

VISUALIZATION OF LUMINOSITY VARIATION IN THE COMBUSTION CHAMBER OF A DIESEL CYCLE ENGINE USING HIGH SPEED VIDEO CAMERA

Submission Author: Deliene Costa Guimarães Barros , MG
Co-Authors: Deliene Costa Guimarães Barros, Débora de Oliveira Borges, Bruno Ferreira, Sergio Hanriot, Rogério Jorge Amorim
Presenter: Rogério Jorge Amorim

doi://10.26678/ABCM.COBEM2023.COB2023-2155

A STUDY OF GAS INTERCHANGEABILITY IN HIGH-POWER BURNER USING BY-PRODUCT OF THE STEEL MAKING PROCESS

Submission Author: Anton Skyrda Verissimo , SP
Co-Authors: Anton Skyrda Verissimo
Presenter: Anton Skyrda Verissimo

doi://10.26678/ABCM.COBEM2023.COB2023-2125

Gas Turbine and Rocket Engine Combustion 1

Numerical Characterization of Biogas Combustion with Laminar Flame Velocity and Ignition Delay Time in Conditions Analogous to Gas Turbine Combustors.

Submission Author: Alexandre Costa Goulart , SP
Co-Authors: Alexandre Costa Goulart, Loreto Pizzuti, Rafael Maia Altafim
Presenter: Alexandre Costa Goulart

doi://10.26678/ABCM.COBEM2023.COB2023-0972

Internal Combustion Engines 15

DESIGN AND IMPLEMENTATION OF HARDWARE-IN-THE-LOOP (HIL) PLATAFORM FOR TURBOCHARGED STRATIFIED INJECTED (TSI) ENGINES

Submission Author: RAUL FERNANDO SANCHEZ AGUILAR , DF
Co-Authors: RAUL FERNANDO SANCHEZ AGUILAR, Fábio Lisboa, Evandro Teixeira, Tulio Oliveira, André Murilo
Presenter: RAUL FERNANDO SANCHEZ AGUILAR

doi://10.26678/ABCM.COBEM2023.COB2023-2201

Numerical simulation of a locomotive engine using detailed chemical kinetics with n-heptane as a diesel surrogate

Submission Author: Javier Antonio Mendoza Corredor , SC
Co-Authors: Javier Antonio Mendoza Corredor , Miguel Barrientos, Leonel R Cancino, Amir Antonio Martins Oliveira, Milton Keisy Kouketsu, Gabriel de Andrade Janene Gonini
Presenter: Miguel Barrientos

doi://10.26678/ABCM.COBEM2023.COB2023-1164

Ethanol charge stratification in supercharged spark-ignition low-displacement engines: An approach to energy efficiency

Submission Author: Tulio Oliveira , DF
Co-Authors: Tulio Oliveira, Fábio Lisboa, Yago Levi Acypreste Benazio, Gabriella Reinert Tosta , RAUL FERNANDO SANCHEZ AGUILAR
Presenter: Fábio Lisboa

doi://10.26678/ABCM.COBEM2023.COB2023-0743

Study of burn rate models in a zero-dimensional model for spark ignition internal combustion engines operating on biogas, biomethane and ethanol

Submission Author: Jullyane Raquel Almeida Nunes , PA
Co-Authors: Jullyane Raquel Almeida Nunes, Ana Paula Mattos
Presenter: Jullyane Raquel Almeida Nunes

doi://10.26678/ABCM.COBEM2023.COB2023-1060

COMPARATIVE PERFORMANCE ANALYSIS OF COMPRESSION IGNITION ENGINE USING DIESEL AND BIOMASS PYROLYSIS OIL MIXTURES

Submission Author: Arthur Vilhena Lima , PA
Co-Authors: Arthur Vilhena Lima, Amanda Carvalho , Paloma Gama da Silva, Hendrick Zarate Rocha, Larissa Santos Queiroz, Nicollas Melo
Presenter: Arthur Vilhena Lima

doi://10.26678/ABCM.COBEM2023.COB2023-2204

Comparative study of energy efficiency in low-displacement engines fueled with methane-based gases and ethanol liquid as fuel.

Submission Author: Marcos Paulo Garcia , DF
Co-Authors: Marcos Paulo Garcia, Fábio Lisboa
Presenter: Fábio Lisboa

doi://10.26678/ABCM.COBEM2023.COB2023-2070

Experimental study in an optically accessible spark ignition engine using methane ignition with a lateral spark plug under stoichiometric and lean combustion

Submission Author: Enrico Rapetti Malheiro de Oliveira , SP
Co-Authors: Enrico Rapetti Malheiro de Oliveira, Fábio Dias, Alexander Penaranda, Leila Ribeiro dos Santos, Andre Martelli, Pedro Lacava
Presenter: Enrico Rapetti Malheiro de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0779

ANALYSIS OF DUAL FUEL OPERATION WITH CONSTANT LOAD IN A COMPRESSION IGNITION ENGINE

Submission Author: Fábio Dias , SP
Co-Authors: Fábio Dias, Pedro Lacava, Enrico Rapetti Malheiro de Oliveira, Alexander Penaranda, Leila Ribeiro dos Santos, Caio Rufino, Raphael Marinho Lomonaco Neto, Celso Argachoy
Presenter: Fábio Dias

doi://10.26678/ABCM.COBEM2023.COB2023-1913

The available detailed kinetics models for ethanol – An extensively numerical assessment on ignition delay times, laminar flame speed and speciation.

Submission Author: JESSICA REBELO , SC
Co-Authors: JESSICA REBELO, Felipe Kraus, Leonel R Cancino
Presenter: JESSICA REBELO

doi://10.26678/ABCM.COBEM2023.COB2023-0596

Ethanol-Water Mixtures as a Promising Fuel Alternative for Reducing Harmful Emissions in Spark Ignition Engines

Submission Author: Heron Ibraim , MG
Co-Authors: Heron Ibraim, Victor Toledo , Elisangela Leal, Thales Santos
Presenter: Heron Ibraim

doi://10.26678/ABCM.COBEM2023.COB2023-1124

Combustion and emission analysis of a single-cylinder compression ignition engine in a dual-fuel mode with HVO and biogas: a CFD approach

Submission Author: Gustavo Vieira Frez , RJ
Co-Authors: Gustavo Vieira Frez, Túlio Augusto Zucareli de Souza, Gabriel Marques Pinto, Roberto Berlini Rodrigues da Costa, Luis Filipe de Almeida Roque, Christian Jeremi R. Coronado, Fagner Luis Goulart Dias
Presenter: Gustavo Vieira Frez

doi://10.26678/ABCM.COBEM2023.COB2023-0877

0D/1D ANALYSIS OF THE PERFORMANCE AND EMISSIONS OF A NATURAL GAS ENGINE OPERATING ON ETHANOL

Submission Author: Miguel Barrientos , MG
Co-Authors: Miguel Barrientos, Leonel R Cancino, Amir Antonio Martins Oliveira, Gabriel de Andrade Janene Gonini, Milton Keisy Kouketsu, Javier Antonio Mendoza Corredor
Presenter: Miguel Barrientos

doi://10.26678/ABCM.COBEM2023.COB2023-1151

Influence of heating a port fuel injection system on hydrous ethanol in an optically accessible spark ignition engine

Submission Author: Frederico Weissinger , SP
Co-Authors: Frederico Weissinger, Pedro Lacava, Alexander Penaranda, Andre Martelli, Fábio Dias, Enrico Rapetti Malheiro de Oliveira, Leila Ribeiro dos Santos, Vincent Bigliardi
Presenter: Pedro Lacava

doi://10.26678/ABCM.COBEM2023.COB2023-0625

STUDIES OF THE INFLUENCE IN THE PERFORMANCE PARAMETERS IN SPARK IGNITION ENGINE OF TWO HEAT TRANSFER MODELS IN A PHENOMENOLOGICAL MODEL USING BIOMETHANE, BIOGAS AND ETHANOL

Submission Author: Nelson Ferreira Gonçalves Junior , PA
Co-Authors: Nelson Ferreira Gonçalves Junior, Ana Paula Mattos
Presenter: Nelson Ferreira Gonçalves Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0994

Energy, Exergy, Performance and Combustion Assessment of a Small Diesel Engine Fueled with Crambe abyssinica Methyl Ester

Submission Author: Ramon Eduardo Pereira Silva , MS
Co-Authors: Omar Seye, Rogerio da Silva Santos, Ramon Eduardo Pereira Silva
Presenter: Ramon Eduardo Pereira Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1728

Laminar Flames 5

NUMERICAL STUDY OF THE BUOYANT DIFFUSION FLAMES STABILITY IN A RECTANGULAR GROOVE

Submission Author: Jean Carlos Guedes Souza , ES
Co-Authors: Renan Batista Matheus Ferreira, Jean Carlos Guedes Souza, Fernando Filho Fachini, Caio Maioli, Guilherme Alvarez, Eduardo Reis Sampaio Filho, Leandro M. Fernandes
Presenter: Guilherme Alvarez

doi://10.26678/ABCM.COBEM2023.COB2023-1014

TRANSIENT BEHAVIOR OF DIFFUSION FLAMES: BUOYANCY INDUCING FLICKERING IN GROOVE GEOMETRY

Submission Author: Guilherme Alvarez , ES
Co-Authors: Guilherme Alvarez, Eduardo Reis Sampaio Filho, Fernando Filho Fachini, Leandro M. Fernandes
Presenter: Guilherme Alvarez

doi://10.26678/ABCM.COBEM2023.COB2023-0563

Experimental characterization of automotive ethanol commercially available in Brazil.

Submission Author: Fabio Bongoski , SC
Co-Authors: Fabio Bongoski, Roberto Wolf Francisco Jr.
Presenter: Fabio Bongoski

doi://10.26678/ABCM.COBEM2023.COB2023-1598

EXPERIMENTAL STUDY OF THE DIFFUSION FLAME LENGTH IN DIFFERENT CROSS-SECTIONS BURNERS IN MIXTURES OF NG-H2 DILUTED WITH CO2

Submission Author: Diego Jhovanny Mariños Rosado , SP
Co-Authors: Diego Jhovanny Mariños Rosado, João Carvalho, Miguel Huaraz Rodriguez, Andrés Armando Mendiburu Zevallos
Presenter: Diego Jhovanny Mariños Rosado

doi://10.26678/ABCM.COBEM2023.COB2023-0029

Wall Temperature Influence On Confined Laminar Equidiffusional Jet Flames

Submission Author: Ricardo Soares , RJ
Co-Authors: Ricardo Soares, Albino Leiroz
Presenter: Albino Leiroz

doi://10.26678/ABCM.COBEM2023.COB2023-1801

Other Concepts on Combustion 2

NUMERICAL STUDY OF DISTORTED TULIP FLAME PROPAGATION IN CLOSED CHANNELS

Submission Author: Fernando Illacanchi Guerra , Lima
Co-Authors: Fernando Illacanchi Guerra, René Sebastian Valencia Ramírez, Cesar Celis, Andrés Armando Mendiburu Zevallos, Luis Bravo, Prashant Khare
Presenter: René Sebastian Valencia Ramírez

doi://10.26678/ABCM.COBEM2023.COB2023-0815

IGNITION DELAY TIME OF GELLED GREEN FUEL WITH DIFFERENT FUMED SILICA CONTENT WITH HTP

Submission Author: Gabriel Silva Dias , SP
Co-Authors: Gabriel Silva Dias, Marcio Teixeira de Mendonca, FERNANDO DE SOUZA COSTA, Luiz Henrique Schaffazick, Cesar Addis Valverde Salvador
Presenter: Luiz Henrique Schaffazick

doi://10.26678/ABCM.COBEM2023.COB2023-1430

Solid Fuel Combustion 2

Energy generation in rankine cycle power plant from the incineration of forest residues

Submission Author: Gilvana Scoculi de Lira , PR
Co-Authors: Gilvana Scoculi de Lira, Beatriz Jacob Furlan, Rafael Silva Ribeiro Gonçalves, Dhyogo Miléo Taher, Marcelo Langer, Fernando Ferraz, Wellington Balmant, JOSÉ VIRIATO COELHO VARGAS, André Bellin Mariano
Presenter: Rafael Silva Ribeiro Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-0133

CHARACTERIZATION OF RESIDUAL POWDERS FROM URBAN ARBORATION FOR FEASIBILITY ANALYSIS FOR SOLID FUEL PRODUCTION

Submission Author: ISAAC ANDERSON ALVES DE MOURA , CE
Co-Authors: ISAAC ANDERSON ALVES DE MOURA, Joelda Dantas, Elvia Leal, Philip Alexandre Araújo Ventura dos Santos, Francielle Cristine Gonçalves, Kelly Cristiane Gomes
Presenter: Francielle Cristine Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-2203

Spray, Droplet, and Supercritical Combustion 2

VALIDATION OF AN ETHANOL-REDUCED CHEMICAL KINETIC MECHANISM AT SUPERCRITICAL CONDITIONS USING REAL GAS STATE EQUATION

Submission Author: Paulo Vitor Ribeiro Plácido , Buscando endereço...
Co-Authors: Paulo Vitor Ribeiro Plácido, Rogério Gonçalves dos Santos, DARIO ALVISO
Presenter: Paulo Vitor Ribeiro Plácido

doi://10.26678/ABCM.COBEM2023.COB2023-0058

Numerical study of the spray pattern in high pressure injected ethanol

Submission Author: Gustavo Garcia , SP
Co-Authors: Gustavo Garcia, GUENTHER Krieger Filho, Antonio Pacifico
Presenter: GUENTHER Krieger Filho

doi://10.26678/ABCM.COBEM2023.COB2023-0579

Stationary Combustion Systems and Control of Greenhouse Gas Emissions 2

STUDY OF THE COMBUSTION OF BIOETHANOL WITH EXCESS OF WATER USING A POROUS BURNER WITH COUPLED EVAPORATOR

Submission Author: Mauro A. Moreira Gonçalves , SC
Co-Authors: Mauro A. Moreira Gonçalves, Roberto Wolf Francisco Jr.
Presenter: Mauro A. Moreira Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1622

Prospection for advanced materials properties for carbon capture from combustion gases

Submission Author: Marcelo Risso Errera , PR
Co-Authors: Marcio Carzino, Claudia Luiza Manfredi Gasparovic, George Stanescu, Marcelo Risso Errera
Presenter: Marcio Carzino

doi://10.26678/ABCM.COBEM2023.COB2023-2173

Turbulent Flames 1

NUMERICAL SIMULATION OF A TURBULENT JET DIFFUSION FLAME OF DIMETHYL ETHER USING LES

Submission Author: Jonatan Ismael Eisermann , RS
Co-Authors: Jonatan Ismael Eisermann, Alvaro de Bortoli
Presenter: Jonatan Ismael Eisermann

doi://10.26678/ABCM.COBEM2023.COB2023-2065

Dynamics, Control, Vibrations and Acoustics

Acoustics and vibroacoustics 21

AN ANALYSIS OF VIBRATION AND WORKPIECE SURFACE QUALITY IN THE MILLING PROCESS

Submission Author: Tobias Anderson Guimarães , MG
Co-Authors: Tobias Anderson Guimarães, RAPHAEL SILVA LINS, Luciano Fernandes, Paulo Sergio Martins, Marcio Bacci Da Silva
Presenter: RAPHAEL SILVA LINS

doi://10.26678/ABCM.COBEM2023.COB2023-0070

Development of slotted panel to acoustic treatment of rooms

Submission Author: Leandro Barbosa , SC
Co-Authors: Leandro Barbosa, Gildean Almeida, Erasmo Felipe Vergara, Arcanjo Lenzi, Robson Zdebski Mikulksi
Presenter: Leandro Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-2110

Aeroacoustics effects of the Wavy Leading Edge on a Fan-Rig SDT stators.

Submission Author: Andressa Garcia , SP
Co-Authors: Andressa Garcia, Hernán Cerón-Muñoz, Rolando Guzmán-Bohórquez
Presenter: Andressa Garcia

doi://10.26678/ABCM.COBEM2023.COB2023-0411

"Symmetrical Damage Detection in Beam Structures using Wave Propagation and Piezoelectric Sensors: A Theoretical Study"

Submission Author: Pedro Christian Ayala Castillo , PA
Co-Authors: Pedro Christian Ayala Castillo, Michael Brennan
Presenter: Pedro Christian Ayala Castillo

doi://10.26678/ABCM.COBEM2023.COB2023-2316

Comparison of the sound absorption coefficient for three natural fiber samples with and without air gap using the impedance tube.

Submission Author: Key Fonseca de Lima , PR
Co-Authors: Ana Carolina Mendonça Mansur, CLAUDIA BITTENCOURT, Marco Zeschotko, Nilson Barbieri, Key Fonseca de Lima, Fernando Jun Hattori Terashima
Presenter: Ana Carolina Mendonça Mansur

doi://10.26678/ABCM.COBEM2023.COB2023-2317

FREQUENCY POWER LAWS FOR THE DECAY OF THE LEAK NOISE SPECTRUM IN SANDY SOIL WITH DIFFERENT DEGREES OF COMPACTION

Submission Author: Matheus Proença , SP
Co-Authors: Matheus Proença, Daniel Henrique de Sousa Obata, Amarildo Tabone Paschoalini, Vinícius de Araújo Salmazo
Presenter: Matheus Proença

doi://10.26678/ABCM.COBEM2023.COB2023-0188

Validation of a time-domain model for acoustic impedance tube design

Submission Author: Alexander Pasqual , SP
Co-Authors: Alexander Pasqual, Thiago de Paula Sales
Presenter: Thiago de Paula Sales

doi://10.26678/ABCM.COBEM2023.COB2023-1573

APPLICATION OF VIBRATION AND SOUND SIGNALS FOR EVALUATING MACHINING PARAMETERS RELATED TO THE MILLING PROCESS OF AISI D6 STEEL

Submission Author: WALLIF SOUZA , SP
Co-Authors: WALLIF SOUZA, Emerson dos Reis, Roberto Giani Pattaro Junior
Presenter: Roberto Giani Pattaro Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0492

Evaluation of sound quality in faults of single-phase induction motors generated in a manufacturing process

Submission Author: Gabriel Brandão Santos , SC
Co-Authors: Gabriel Brandão Santos, Erasmo Felipe Vergara, Danilo da Silva Toniato, Henrique Silveira
Presenter: Gabriel Brandão Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1130

Sound energy control in a wide frequency domain by a hybrid acoustic material

Submission Author: Gildean Almeida , SC
Co-Authors: Gildean Almeida, Erasmo Felipe Vergara, Leandro Barbosa, Lucas Roussenq Zanatta, Kleyton Zimmermann, Robson Zdebski Mikulksi, Victor Bahú
Presenter: Victor Bahú

doi://10.26678/ABCM.COBEM2023.COB2023-0163

Use of natural fibers for sound absorption: A chronological literature review

Submission Author: Flávio Kubota , PR
Co-Authors: Gabriel Weiss Mattioli, Vinicius Doca, Flávio Kubota
Presenter: Gabriel Weiss Mattioli

doi://10.26678/ABCM.COBEM2023.COB2023-0770

An experimental investigation on the two-phase intermittent flow coupling with structural vibration of horizontal pipes

Submission Author: Adriano Todorovic Fabro , DF
Co-Authors: Daniely Amorim das Neves, Adriano Todorovic Fabro, Saon Vieira, Juliana Cenzi, Rafael Franklin Lazaro de Cerqueira, Marcelo Souza de Castro
Presenter: Adriano Todorovic Fabro

doi://10.26678/ABCM.COBEM2023.COB2023-1988

Comparing Analytical and Numerical Solutions for Fluid-Structure Problems with Free Surface Conditions: A Study on Tuned Liquid Dampers and Tuned Liquid Column Dampers

Submission Author: Pedro Viégas , DF
Co-Authors: Pedro Viégas, Marcus Vinicius Girão de Morais, Agnaldo Antonio, Raul Dari Durand Farfan
Presenter: Pedro Viégas

doi://10.26678/ABCM.COBEM2023.COB2023-0791

An Assessment of Occupational Noise Exposure in Concrete Mixer Truck Drivers

Submission Author: Maria dos Reis Santos Borges , DF
Co-Authors: Marcos Santos, Maria Alzira de Araújo Nunes, Maria dos Reis Santos Borges
Presenter: Maria dos Reis Santos Borges

doi://10.26678/ABCM.COBEM2023.COB2023-0025

An investigation of wave propation in rotating shafts with attached disks

Submission Author: Gilberto de Sousa Pinheiro Filho , DF
Co-Authors: Gilberto de Sousa Pinheiro Filho, Adriano Todorovic Fabro, Laís Bittencourt Visnadi
Presenter: Gilberto de Sousa Pinheiro Filho

doi://10.26678/ABCM.COBEM2023.COB2023-0378

Comparison of experimental transmission loss of expansion chambers models with extended ducts and microperforated panel

Submission Author: Maria dos Reis Santos Borges , DF
Co-Authors: Maria dos Reis Santos Borges, Maria Alzira de Araújo Nunes
Presenter: Maria dos Reis Santos Borges

doi://10.26678/ABCM.COBEM2023.COB2023-0024

Nonlinear simulation of transmission gears coupling considering the impact pair effect

Submission Author: Nícolas Gass , SP
Co-Authors: Nícolas Gass, Alberto Luiz Serpa
Presenter: Nícolas Gass

doi://10.26678/ABCM.COBEM2023.COB2023-2053

Study of the sound absorption of two composites made with polyurethane and natural fiber layers at low frequency using an impedance tube.

Submission Author: Key Fonseca de Lima , PR
Co-Authors: CLAUDIA BITTENCOURT, Ana Carolina Mendonça Mansur, Marco Zeschotko, Fernando Jun Hattori Terashima, Nilson Barbieri, Key Fonseca de Lima
Presenter: CLAUDIA BITTENCOURT

doi://10.26678/ABCM.COBEM2023.COB2023-2187

CORRELATION BETWEEN MECHANICAL VIBRATION AND WORKPIECE SURFACE QUALITY IN THE GRINDING PROCESS

Submission Author: Luciano Fernandes , MG
Co-Authors: Luciano Fernandes, Tobias Anderson Guimarães, RAPHAEL SILVA LINS
Presenter: RAPHAEL SILVA LINS

doi://10.26678/ABCM.COBEM2023.COB2023-0139

A web-based simulator to aid leak detection in water distribution pipes when using vibro-acoustic techniques

Submission Author: Fabricio Cesar Lobato de Almeida , SP
Co-Authors: Fabricio Cesar Lobato de Almeida, Michael Brennan, Mauricio Iwanaga, Oscar Scussel, SILLAS DE CEZAR
Presenter: Fabricio Cesar Lobato de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-1283

Identification of the wingbeat frequency of mosquitoes using mathematical models.

Submission Author: Gerardo Pizo , DF
Co-Authors: Gerardo Pizo
Presenter: Gerardo Pizo

doi://10.26678/ABCM.COBEM2023.COB2023-1930

Control of Mechanical Systems 11

Analysis of fuzzy compensators applied in the intelligent control of electro-hydraulic systems

Submission Author: Maria Carolina Albuquerque de Souza Santos , MG
Co-Authors: Maria Carolina Albuquerque de Souza Santos, Marcelo Costa Tanaka
Presenter: Maria Carolina Albuquerque de Souza Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1590

Design of passive dynamic absorbers to attenuate pathological tremor of human upper limb

Submission Author: Gabriel Guimarães de Souza Braga de Albuquerque , DF
Co-Authors: Gabriel Guimarães de Souza Braga de Albuquerque, Braion Moura, Marcela Machado
Presenter: Gabriel Guimarães de Souza Braga de Albuquerque

doi://10.26678/ABCM.COBEM2023.COB2023-1292

MONITORING OF BALLBEARINGS VIA VIBRATION ANALYSIS FOR PREDICTIVE MAINTENANCE PURPOSES

Submission Author: Adiel Pessôa , MG
Co-Authors: Adiel Pessôa, Paulo Cezar Büchner, Geice Paula Villibor, Alexandre Martins Reis, Charles Luís da Silva, Álisson Carlos Souza Rodrigues
Presenter: Geice Paula Villibor

doi://10.26678/ABCM.COBEM2023.COB2023-1851

A Comparative Study of PID Controller Tuning Methods using Bio-Inspired Algorithms and IMC Approach for a Nonlinear Tank System

Submission Author: Matheus Bawden Silverio de Castro , DF
Co-Authors: Matheus Bawden Silverio de Castro, Gabriel da Silva Lima, Vinicius Rafael de Freitas, Eduardo Liberato, José Oniram de Aquino Limaverde Filho, Eugenio Fortaleza, Rafael Valladares de Almeida
Presenter: Matheus Bawden Silverio de Castro

doi://10.26678/ABCM.COBEM2023.COB2023-2168

Surrogate active vibration control of a rotating shaft supported by magnetic bearings

Submission Author: Maria Carolina Albuquerque de Souza Santos , MG
Co-Authors: Maria Carolina Albuquerque de Souza Santos, Aldemir Ap Cavalini Jr, Marco Túlio Santana Alves, Marcelo Costa Tanaka, Valder Steffen Jr
Presenter: Maria Carolina Albuquerque de Souza Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1144

DYNAMIC BEHAVIOR ANALYSIS OF A FRAME WITH ROTATIONAL FRICTION DAMPER BY NUMERICAL AND EXPERIMENTAL METHOD

Submission Author: Fabrício do Amaral Cristóvão , PB
Co-Authors: Fabrício do Amaral Cristóvão, Antonio Almeida Silva, Andersson Oliveira, José Sávyo Soares Lira, Handerson Valdevino
Presenter: Antonio Almeida Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1188

Use of metamaterials to reduce vibration of a wind tower subjected to an arbitrary stochastic wind

Submission Author: Vinícius Gabriel Peixoto Borges , DF
Co-Authors: Vinícius Gabriel Peixoto Borges, Nícolas da Silva Dias, Aline Souza de Paula, Adriano Todorovic Fabro
Presenter: Vinícius Gabriel Peixoto Borges

doi://10.26678/ABCM.COBEM2023.COB2023-2360

A SYSTEMATIC APPROACH TO REVIEWING CONTROL STRATEGIES IN LOWER LIMB EXOSKELETONS: METHODOLOGY AND INSIGHTS

Submission Author: Nasiru Adamu Marafa , SP
Co-Authors: Adriano Siqueira
Presenter: Nasiru Adamu Marafa

doi://10.26678/ABCM.COBEM2023.COB2023-2437

A comparative analysis of online and offline methods for secondary path estimation in active noise control applications using the Fx-LMS algorithm

Submission Author: Bruno Giuliani Gomes , DF
Co-Authors: Bruno Giuliani Gomes, Gabriela Cristina Candido da Silva, Renato Lopes, Maria Alzira de Araújo Nunes, André Murilo
Presenter: Bruno Giuliani Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0512

MODE OBSERVER BASED ON MOVING HORIZON ESTIMATION APPROXIMATION THROUGH NEURAL NETWORKS

Submission Author: Lara Candido Alvim , RJ
Co-Authors: Lara Candido Alvim, Leonardo Dias Pereira, Helon Vicente Hultmann Ayala, Elias Dias Rossi Lopes
Presenter: Lara Candido Alvim

doi://10.26678/ABCM.COBEM2023.COB2023-2100

Sliding Mode Control for Suppression of Stick-Slip Vibrations in Oilwell Drill Strings

Submission Author: Paulo Victor Gomes dos Santos , RJ
Co-Authors: André Victor da Silva Castilho, Paulo Victor Gomes dos Santos, Pedro Henrique Gomes dos Santos
Presenter: André Victor da Silva Castilho

doi://10.26678/ABCM.COBEM2023.COB2023-0921

Dynamics of Mechanical Systems 11

Numerical Simulation of Shock Loads for High-Voltage Traction Batteries

Submission Author: Sergej Diel , Bavaria
Co-Authors: Gero Walter
Presenter: Sergej Diel

doi://10.26678/ABCM.COBEM2023.COB2023-2430

Modal analysis of SpectraQuest's Machinery Fault Simulator

Submission Author: Luiz Felipe da Rosa Fonseca da Silva , SC
Co-Authors: Luiz Felipe da Rosa Fonseca da Silva, Maria Vitoria Sikora, Luisa Yumi Antunes Kaneko, Julio Cordioli, Danilo Braga
Presenter: Luiz Felipe da Rosa Fonseca da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2161

Machine Learning Approach for Structural Health Monitoring Using Decision Trees and XGBoost

Submission Author: Heitor Rosa , SP
Co-Authors: Heitor Rosa, Eloi Figueiredo, Samuel da Silva
Presenter: Heitor Rosa

doi://10.26678/ABCM.COBEM2023.COB2023-0216

Stability Assessment of the Resonant Linear Permanent Magnetic Generators Powered by Free Piston Engines

Submission Author: Marcelo Braga dos Santos , MG
Co-Authors: Vítor Silva Medeiros, Solidônio Carvalho, Marcelo Braga dos Santos
Presenter: Marcelo Braga dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0752

Modeling and Analysis of Floating Solar Panels with Tracking System for Hydroelectric Plants in the Amazon Region of Brazil

Submission Author: Cláudio Basquerotto , PA
Co-Authors: Cláudio Basquerotto, Jhonny Feldhaus, Antonio Eduardo Turra, Joao Pereira
Presenter: Cláudio Basquerotto

doi://10.26678/ABCM.COBEM2023.COB2023-0294

Modeling, simulation and dynamic analysis of roller bearing with surface damage

Submission Author: Aline de Almeida Soares , SP
Co-Authors: Lucas Florentino Varella, Aline de Almeida Soares, Flávio Yukio Watanabe
Presenter: Aline de Almeida Soares

doi://10.26678/ABCM.COBEM2023.COB2023-0307

Design of a Vibration Machine with Base Displacement Control for Stockbridge Damper Vibration Tests

Submission Author: MARLON MARCHI , PR
Co-Authors: MARLON MARCHI, Nilson Barbieri, Key Fonseca de Lima
Presenter: MARLON MARCHI

doi://10.26678/ABCM.COBEM2023.COB2023-2305

CONVOLUTIONAL NEURAL NETWORKS FOR PATTERN-BASED FAULT DIAGNOSIS IN LOW-ROTATION EQUIPMENT

Submission Author: Elton Prestes de Souza , PA
Co-Authors: Elton Prestes de Souza , Lis Silva de Moura, Thiago Barroso Costa, João Lucas Lobato Soares, Walter dos Santos Sousa, Alexandre Mesquita, André Luiz Amarante Mesquita, Danilo Braga
Presenter: João Lucas Lobato Soares

doi://10.26678/ABCM.COBEM2023.COB2023-2299

MAGNETORHEOLOGICAL DAMPERS IN LANDING GEARS: DYNAMIC ANALYSIS FOCUSED ON SHOCK ABSORPTION AND VIBRATION COMFORT

Submission Author: Felipe Lima de Abreu , SP
Co-Authors: Felipe Lima de Abreu, Murilo Filipus, Douglas Bueno, Rodrigo Borges Santos
Presenter: Felipe Lima de Abreu

doi://10.26678/ABCM.COBEM2023.COB2023-0774

Analysis of vibration dynamics with nonlinear damping by means of the Krylov-Bogoliubov method.

Submission Author: Robert Batista Neves , AM
Co-Authors: Robert Batista Neves, Gustavo Cunha da Silva Neto, Danilo de Santana Chui, Bruna Santiago , Matheus Aleme
Presenter: Robert Batista Neves

doi://10.26678/ABCM.COBEM2023.COB2023-1740

A COMBINATION OF SIGNAL PROCESSING AND CLASSIFICATION TECHNIQUES FOR EVALUATING HEALTH CONDITIONS IN GEARED SYSTEMS - A SIMULATION-BASED APPROACH

Submission Author: José Carlos Dias Filho , RJ
Co-Authors: José Carlos Dias Filho, Fabricio Cesar Lobato de Almeida, Marcos Silveira
Presenter: José Carlos Dias Filho

doi://10.26678/ABCM.COBEM2023.COB2023-0783

Multibody systems 4

A MULTIBODY-DYNAMIC MODEL TO STUDY THE INFLUENCE OF HAUL TRUCK SUSPENSION SETUP ON THE CHASSIS MECHANICAL BEHAVIOR

Submission Author: Alvaro Estanislau Dantas , MG
Co-Authors: Alvaro Estanislau Dantas, Marco Túlio Faria
Presenter: Alvaro Estanislau Dantas

doi://10.26678/ABCM.COBEM2023.COB2023-0476

Optimizing Communication for Catarina Constellation’s Nanossatelites

Submission Author: Guilherme Gomes , SC
Co-Authors: Guilherme Gomes, Rafael Cuenca, Damylle Donati, Talita Possamai, Rodrigo Cardozo
Presenter: Guilherme Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0317

On the modeling of an UAV flight formation for aerial transportation

Submission Author: Renan Silva , São Paulo
Co-Authors: Renan Silva, Douglas Bueno, Rodrigo Borges Santos
Presenter: Renan Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1467

Computational Analysis Of Weapons Shooting Accuracy Under Vibrations Conditions

Submission Author: Dante Ricardo Ambrosio , SP
Co-Authors: Dante Ricardo Ambrosio, Domingos Rade
Presenter: Dante Ricardo Ambrosio

doi://10.26678/ABCM.COBEM2023.COB2023-2342

Nonlinear dynamics 3

IMPROVED HEALTH INDICATOR FOR LOW-SPEED BEARING FAULT DIAGNOSIS

Submission Author: Thiago Barroso Costa , PA
Co-Authors: Thiago Barroso Costa, João Lucas Lobato Soares, Elton Prestes de Souza , Jonatas Cruz da Silva, Walter dos Santos Sousa, Alexandre Mesquita, André Luiz Amarante Mesquita, Danilo Braga
Presenter: João Lucas Lobato Soares

doi://10.26678/ABCM.COBEM2023.COB2023-2304

Prediction of the Stability Map of a Non-Conventional Sintering Process by Using a Dynamic Bifurcation Model

Submission Author: João Gustavo Pereira da Silva , SP
Co-Authors: João Gustavo Pereira da Silva, Sidney Bruce Shiki, Hazim Ali Al-Qureshi
Presenter: João Gustavo Pereira da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1155

INVESTIGATION OF AN IDENTICAL METASTRUCTURE FOR VIBRATION ATTENUATION IN A CRANKSHAFT WITH NON-CONSTANT INERTIA

Submission Author: Nícolas da Silva Dias , DF
Co-Authors: Nícolas da Silva Dias, Aline Souza de Paula
Presenter: Nícolas da Silva Dias

doi://10.26678/ABCM.COBEM2023.COB2023-0626

Rotordynamics 23

Virtual Sensing of Rotating Machines using Augmented Kalman Filter and ROSS Models

Submission Author: Stanley Washington Ferreira Rezende , GO
Co-Authors: Stanley Washington Ferreira Rezende, Raimundo Neto, Maria Carolina Albuquerque de Souza Santos, Jose dos Reis Vieira de Moura Jr, Aldemir Ap Cavalini Jr, Valder Steffen Jr
Presenter: Stanley Washington Ferreira Rezende

doi://10.26678/ABCM.COBEM2023.COB2023-0674

Comparison of Traditional Vibration Analysis Techniques and Machine Learning Models for Bearing Fault Detection

Submission Author: Victor Bauler , SC
Co-Authors: Victor Bauler, Julio Cordioli, Danilo Braga, Danilo Silva
Presenter: Victor Bauler

doi://10.26678/ABCM.COBEM2023.COB2023-1635

Comparative Study of Artificial Neural Networks and Augmented Kalman Filter models applied to balancing of Flexible Rotors without test mass

Submission Author: Raimundo Neto , RN
Co-Authors: Raimundo Neto, Stanley Washington Ferreira Rezende, Leonardo Cabral, Aldemir Ap Cavalini Jr, Arinan Dourado, Valder Steffen Jr
Presenter: Raimundo Neto

doi://10.26678/ABCM.COBEM2023.COB2023-0368

Fault detection in rotating machines using LSTM and time series analysis

Submission Author: Daniel Awada Elarrat Canto , PR
Co-Authors: Daniel Awada Elarrat Canto, Maurizio Radloff Barghouthi, Leonardo Kaucz, Eduardo Márcio de Oliveira Lopes, Giuliana Sardi Venter
Presenter: Daniel Awada Elarrat Canto

doi://10.26678/ABCM.COBEM2023.COB2023-1198

Dynamical analysis of a helical gear pair with backlash under variable load torque conditions

Submission Author: Laís Bittencourt Visnadi , DF
Co-Authors: Aline Souza de Paula
Presenter: Laís Bittencourt Visnadi

doi://10.26678/ABCM.COBEM2023.COB2023-2429

DYNAMIC ANALYSIS OF A MULTI-SHAFT GEARED SYSTEM SUPPORTED BY HYDRODYNAMIC BEARINGS

Submission Author: João Henrique dos Santos de Pontes , SP
Co-Authors: João Henrique dos Santos de Pontes, Gregory Bregion Daniel, Tiago Machado
Presenter: Gregory Bregion Daniel

doi://10.26678/ABCM.COBEM2023.COB2023-1422

Numerical Simulation of Gas and Liquid Seals for Rotordynamic Coefficients Calculations using Open Source Software

Submission Author: Franco Barbi , SP
Co-Authors: Franco Barbi, João Marcelo Vedovotto, Aldemir Ap Cavalini Jr, Aristeu Silveira Neto, Raphael Timbó
Presenter: Franco Barbi

doi://10.26678/ABCM.COBEM2023.COB2023-0849

Numerical Analysis of Rotordynamic Systems Using Harmonic Balance Method

Submission Author: Bárbara Nara Teixeira Cunha , MG
Co-Authors: Bárbara Nara Teixeira Cunha, Aldemir Ap Cavalini Jr, Valder Steffen Jr, Prashant Kambali, C. Nataraj
Presenter: Bárbara Nara Teixeira Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-1736

Explainable AI applied to Malfanction Parameter Determination on Rotating Machines using Bayesian Neural Networks and Sobol Index

Submission Author: Olympio Belli , SP
Co-Authors: Olympio Belli, Helio Fiori de Castro
Presenter: Olympio Belli

doi://10.26678/ABCM.COBEM2023.COB2023-0943

Prediction and Control of Bifurcations in rotor-foundation systems supported by fluid-film bearings

Submission Author: Arthur Mereles , SP
Co-Authors: Arthur Mereles, Diogo Stuani Alves, Katia Lucchesi Cavalca Dedini
Presenter: Arthur Mereles

doi://10.26678/ABCM.COBEM2023.COB2023-0335

Assessment of Modal Balancing Technique Applied to a Rotating Machine Supported by Deep-Groove Ball Bearings

Submission Author: Thiago de Paula Sales , SP
Co-Authors: Yuri Andrade Dias Martins, Thiago de Paula Sales
Presenter: Yuri Andrade Dias Martins

doi://10.26678/ABCM.COBEM2023.COB2023-1101

Balancing of Rotating Systems without Trial Masses

Submission Author: Diego Ataíde Couto de Paula , SP
Co-Authors: Diego Ataíde Couto de Paula, Katia Lucchesi Cavalca Dedini, Diogo Stuani Alves
Presenter: Diego Ataíde Couto de Paula

doi://10.26678/ABCM.COBEM2023.COB2023-0040

Uncertainty Analysis of the Band Gap Formation in Periodic Rotors

Submission Author: Patrick Bueno Lamas , SP
Co-Authors: Patrick Bueno Lamas, Rodrigo Nicoletti
Presenter: Patrick Bueno Lamas

doi://10.26678/ABCM.COBEM2023.COB2023-1408

Structural Optimization for Resonance-Free Turbomachinery Blisks

Submission Author: Diego Zilli Lima , SP
Co-Authors: Diego Zilli Lima, Daniel Dezan, Wallace Ferreira, Elóy Esteves Gasparin, Vitor Cesar Nogueira Mattos, Leandro Salviano, Jurandir Itizo Yanagihara
Presenter: Diego Zilli Lima

doi://10.26678/ABCM.COBEM2023.COB2023-0057

Comparative Analysis of the Rotordynamic Coefficients of a Plain Seal

Submission Author: Kaíque César Macedo Chagas , MG
Co-Authors: Kaíque César Macedo Chagas, Leonardo Cabral, Aldemir Ap Cavalini Jr, Valder Steffen Jr, Franco Barbi
Presenter: Kaíque César Macedo Chagas

doi://10.26678/ABCM.COBEM2023.COB2023-0837

On the application of adptive controllers to a 25 MW floating wind turbine

Submission Author: Carlos Renan dos Santos , Noruega
Co-Authors: Carlos Renan dos Santos
Presenter: Carlos Renan dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0269

DECISION TREE FOR FEATURE SELECTION TO DIAGNOSIS OF BELT CONVEYOR IDLER

Submission Author: João Lucas Lobato Soares , PA
Co-Authors: João Lucas Lobato Soares, Thiago Barroso Costa, Lis Silva de Moura, Walter dos Santos Sousa, Alexandre Mesquita, André Luiz Amarante Mesquita, Danilo Braga
Presenter: João Lucas Lobato Soares

doi://10.26678/ABCM.COBEM2023.COB2023-2261

COMPARISON OF MACHINE LEARNING TECHNIQUES FOR FAULT DIAGNOSIS IN BELT CONVEYOR IDLERS

doi://10.26678/ABCM.COBEM2023.COB2023-2267

Analysis of the torsional vibration in rotodynamics

Submission Author: Natália Rie Horikawa , MG
Co-Authors: Natália Rie Horikawa, Gladson Willian Pereira Rodrigues, Álisson Carlos Souza Rodrigues, Paulo Cezar Büchner, Alexandre Martins Reis, Charles Luís da Silva, Adiel Pessôa, Geice Paula Villibor
Presenter: Geice Paula Villibor

doi://10.26678/ABCM.COBEM2023.COB2023-0567

Vibration Reduction of Flexible Shaft with Active Bearing

Submission Author: Heitor Antônio Pereira da Silva , SP
Co-Authors: Heitor Antônio Pereira da Silva, Rodrigo Nicoletti
Presenter: Heitor Antônio Pereira da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1826

Some Considerations about the Use of Operational Modal Analysis in Turbomachinery

Submission Author: Luiz Antonio Vaz Pinto , RJ
Co-Authors: Adhemar Castilho, Antônio Carlos Troyman , Luiz Antonio Vaz Pinto, Ulisses Admar Barbosa Vicente Monteiro
Presenter: Adhemar Castilho

doi://10.26678/ABCM.COBEM2023.COB2023-0094

Hydrodynamic cylindrical journal bearing for experimental validation of numerical models

Submission Author: Ely Queiroz Gomes , MG
Co-Authors: Ely Queiroz Gomes, Leonardo Sicchieri, Aldemir Ap Cavalini Jr, Valder Steffen Jr
Presenter: Ely Queiroz Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-1190

IDENTIFICATION OF MODAL PARAMETERS OF COUPLED ROTOR FOUNDATION SYSTEM VIA AUTOMATIC OPERATIONAL MODAL ANALYSIS

Submission Author: Nathali Dreher , PR
Co-Authors: Nathali Dreher, Tiago Machado, Thomas Thougaard Paulsen, Ilmar Santos
Presenter: Nathali Dreher

doi://10.26678/ABCM.COBEM2023.COB2023-1734

Smart structures 5

Design and analysis of a topological piezoelectric metamaterial beam

Submission Author: Luis Alfredo Pérez Martínez , SP
Co-Authors: Luis Alfredo Pérez Martínez, Danilo Beli, Carlos De Marqui Junior
Presenter: Luis Alfredo Pérez Martínez

doi://10.26678/ABCM.COBEM2023.COB2023-1700

Investigation of resonant shunt circuit connected piezoelectric path for low-frequency tuning

Submission Author: Braion Moura , GO
Co-Authors: Braion Moura, Daniely Amorim das Neves, Edgar Jhonny Amaya Simeon, Marcela Rodrigues
Presenter: Braion Moura

doi://10.26678/ABCM.COBEM2023.COB2023-1713

THE APPLICATION OF MAGNETO-RHEOLOGICAL ELASTOMER IN A BASE INSOLATION SYSTEM FOR SEISMIC MITIGATION OF HIGHWAY BRIDGES

Submission Author: Fernanda Almeida , SP
Co-Authors: Fernanda Almeida, Matheus Proença, Henrique Edno Leoncini de Carvalho, Daniel Henrique de Sousa Obata, Jeferson Camargo Fukushima, Amarildo Tabone Paschoalini
Presenter: Fernanda Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-1516

ANALYSIS OF A SELF-SUPPORTING HIGH-VOLTAGE POWER TOWER UNDER SEISMIC CONDITIONS WITH THREE-DIMENSIONAL EXCITATIONS

Submission Author: Joao Lucas Salvador de Araujo , PR
Co-Authors: Joao Lucas Salvador de Araujo, Crystian Daniel Paz, Gustavo de Miranda Saleme Gidrão, Rúbia Bosse
Presenter: Joao Lucas Salvador de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-2246

Analysis of manufacturing process of a Superelastic NiTi Bending Spring

Submission Author: Igor Jordan Guilherme de Sena , PB
Co-Authors: Igor Jordan Guilherme de Sena, Richard Senko, Antonio Almeida Silva, Vinícius da Silva Almeida
Presenter: Richard Senko

doi://10.26678/ABCM.COBEM2023.COB2023-1249

Structural dynamics and vibrations 29

Design of a Viscoelastic Pendulum Absorber for Enhancing Fatigue Life in Dynamically Excited Structures

Submission Author: Leonardo de Castro Ferreira dos Santos , PR
Co-Authors: Leonardo de Castro Ferreira dos Santos, Carlos Alberto Bavastri
Presenter: Leonardo de Castro Ferreira dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0086

NUMERICAL EVALUATION OF ITERATIVE METHODS FOR CALCULATING FREQUENCY RESPONSE FUNCTIONS OF DYNAMIC STRUCTURES COMPOSED OF VISCOELASTIC MATERIALS.

Submission Author: Luiz Otavio Rigobello Muraro , PR
Co-Authors: Luiz Otavio Rigobello Muraro, SANDMARA LANHI, Jucélio Tomás Pereira, Simone de Fátima Tomazzoni Goncalves
Presenter: Luiz Otavio Rigobello Muraro

doi://10.26678/ABCM.COBEM2023.COB2023-1604

On The Dynamic Behaviour of Finite and Infinite Beams with Lumped Parameter Attachments

Submission Author: Jean Paulo Carneiro Junior , MS
Co-Authors: Jean Paulo Carneiro Junior, Paulo José Paupitz Gonçalves, Michael Brennan, Vladislav Sorokin, Vinicius Germanos Cleante, Brian Mace, Donovan du Toit
Presenter: Paulo José Paupitz Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1877

A Modal Reduction Scheme for the Free Vibration of Strings with Inertially Loaded Boundary

Submission Author: Pedro Menescal Jales , RN
Co-Authors: Pedro Menescal Jales, Rubens Gonçalves Salsa Junior, Vinícius Lamas von Sohsten
Presenter: Vinícius Lamas von Sohsten

doi://10.26678/ABCM.COBEM2023.COB2023-0457

Bandgap analysis for periodic frame metastructure coupled with local resonators

Submission Author: wanderson vinicius de oliveira monteiro , SP
Co-Authors: wanderson vinicius de oliveira monteiro, Edilson Dantas Nóbrega, Jose Maria Campos dos Santos
Presenter: wanderson vinicius de oliveira monteiro

doi://10.26678/ABCM.COBEM2023.COB2023-1797

On the dynamic behavior of a one-dimensional metamaterial possessing inertial amplification mechanism combined with negative stiffness absorbers

Submission Author: Thiago de Paula Sales , SP
Co-Authors: Vinícius Santos, Thiago de Paula Sales, Morvan Ouisse
Presenter: Vinícius Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1068

Heuristic optimization methodology applied to passive vibration control using constrained layers on plates

Submission Author: SANDMARA LANHI , PR
Co-Authors: SANDMARA LANHI, Luiz Otavio Rigobello Muraro, Jucélio Tomás Pereira
Presenter: SANDMARA LANHI

doi://10.26678/ABCM.COBEM2023.COB2023-1859

Experimental assessment of piezoelectric energy harvesting from VIV on cantilevered flexible cylinders with orthotropic bending stiffness

Submission Author: Letícia Madi , SP
Co-Authors: Letícia Madi, Wagner Antonio Defensor Filho, Guilherme Vernizzi, Andre Mitsuo Kogishi, CELSO Pupo Pesce
Presenter: Letícia Madi

doi://10.26678/ABCM.COBEM2023.COB2023-1611

Numerical Investigation on the Dynamic Behaviour of 1-D Hierarchical Mechanical Metamaterials

Submission Author: Edson Jansen Pedrosa de Miranda Junior , MA
Co-Authors: CASSIO BRUNO FLORENCIO GOMES, Antonio Vinicius Garcia Campos, Edilson Dantas Nóbrega, Flavio Nunes Pereira, Jose Maria Campos dos Santos, Edson Jansen Pedrosa de Miranda Junior
Presenter: CASSIO BRUNO FLORENCIO GOMES

doi://10.26678/ABCM.COBEM2023.COB2023-0841

ON THE USE OF THE GENERALIZED INTEGRATING FACTOR FOR SOLVING COUPLED SYSTEMS OF ORDINARY SECOND ORDER LINEAR DIFFERENTIAL EQUATIONS

Submission Author: Matheus Janczkowski Fogaça , SC
Co-Authors: Matheus Janczkowski Fogaça, Eduardo Lenz Cardoso
Presenter: Matheus Janczkowski Fogaça

doi://10.26678/ABCM.COBEM2023.COB2023-0777

A strategy to form super attenuation bands in beams using arrays of resonators

Submission Author: Vinicius Germanos Cleante , SP
Co-Authors: Vinicius Germanos Cleante, Domingos Rade, Michael Brennan, Paulo José Paupitz Gonçalves, Jean Paulo Carneiro Junior
Presenter: Vinicius Germanos Cleante

doi://10.26678/ABCM.COBEM2023.COB2023-1845

Back-to-back test rig instrumentation for transmission error measurement

Submission Author: Matheus Fernandes Vieira , SP
Co-Authors: Matheus Fernandes Vieira, Guilherme Dos Santos, Ronnie Rego
Presenter: Matheus Fernandes Vieira

doi://10.26678/ABCM.COBEM2023.COB2023-0433

A Stochastic Modeling of Aeroviscoelastic Systems Subjected to Uncertainties for Subsonic Stability Analysis.

Submission Author: Prince Azsembergh Nogueira de Carvalho , RN
Co-Authors: Prince Azsembergh Nogueira de Carvalho, Gutembergy Diniz, Marcelo Araújo Delgado Filho, Bruno Sousa Carneiro da Cunha, Antonio Marcos de Lima
Presenter: Bruno Sousa Carneiro da Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0305

Vibration Attenuation Analysis in a Structural System Applying Pendulum Dynamic Absorber (DVA) with SMA Superelastic Wire and Rod

Submission Author: Yuri José Oliveira Moraes , MG
Co-Authors: Yuri José Oliveira Moraes, Antonio Almeida Silva
Presenter: Yuri José Oliveira Moraes

doi://10.26678/ABCM.COBEM2023.COB2023-0657

Transfer Learning Performance for Structural Health Monitoring through Boundary Condition Investigation

Submission Author: Estênio Fuzaro , SP
Co-Authors: Estênio Fuzaro, Samuel da Silva
Presenter: Estênio Fuzaro

doi://10.26678/ABCM.COBEM2023.COB2023-0165

Investigation of a novel metastructure with trapped, fluid-filled unit cells

Submission Author: Thiago de Paula Sales , SP
Co-Authors: Vinícius Santos, Thiago de Paula Sales, Morvan Ouisse
Presenter: Vinícius Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1067

Wave Propagation and Band Gap Formation in Corrugated Plates

Submission Author: Rodrigo Nicoletti , SP
Co-Authors: Rodrigo Nicoletti
Presenter: Rodrigo Nicoletti

doi://10.26678/ABCM.COBEM2023.COB2023-0518

A study about the effects of extensibility in cantilevered pipes conveying fluid under VIV using a modular modeling methodology

Submission Author: Daniel de Oliveira Tomin , SP
Co-Authors: Daniel de Oliveira Tomin, Renato Maia Matarazzo Orsino, CELSO Pupo Pesce
Presenter: Daniel de Oliveira Tomin

doi://10.26678/ABCM.COBEM2023.COB2023-1681

A NEW APPROACH USING TRANSMISSIBILITY AND KERNEL PRINCIPAL COMPONENT ANALYSIS TO DETECT DAMAGE FOR A NONLINEAR STRUCTURE WITH UNCERTAINTIES

Submission Author: Wellington de Lima Nogueira , SP
Co-Authors: Wellington de Lima Nogueira, Eloi Figueiredo, Samuel da Silva
Presenter: Wellington de Lima Nogueira

doi://10.26678/ABCM.COBEM2023.COB2023-2401

Evaluation of Rolling Bearing Stiffness to Improve Critical Velocity Calculation

Submission Author: Marcos Paulo Nostrani , SC
Co-Authors: Rafael Möller, Victor Lazaro, Marcos Paulo Nostrani
Presenter: Marcos Paulo Nostrani

doi://10.26678/ABCM.COBEM2023.COB2023-1194

Evaluation of different aspect of fault detection methodologies based on Time Synchronous Averaging

Submission Author: Racquel Knust Domingues , SC
Co-Authors: Racquel Knust Domingues, Julio Cordioli, Danilo Braga
Presenter: Racquel Knust Domingues

doi://10.26678/ABCM.COBEM2023.COB2023-1820

Exploring the inertial amplification mechanism in mono-coupled periodic rod structures

Submission Author: Gabriel Moimás , SP
Co-Authors: Gabriel Moimás, Paulo José Paupitz Gonçalves
Presenter: Gabriel Moimás

doi://10.26678/ABCM.COBEM2023.COB2023-1106

Topology optimization of elastic internal resonators for sandwich metastructures

Submission Author: Carlos Andrés Rincón Velásquez , SP
Co-Authors: Carlos Andrés Rincón Velásquez, Marcelo A. Trindade
Presenter: Carlos Andrés Rincón Velásquez

doi://10.26678/ABCM.COBEM2023.COB2023-0799

COMPARATIVE ANALYSIS OF THE PERFORMANCE OF TMD AND KDAMPER VIBRATION ATTENUATORS

Submission Author: José Picoral , RS
Co-Authors: José Picoral, Gibran Gomes, Herbert Gomes, ewerton grotti, Leonardo Roso Colpo
Presenter: Herbert Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0212

ON THE EVALUATION OF NATURAL FREQUENCIES AND MODE SHAPES OF BEAMS UNDER TENSILE AXIAL LOAD

Submission Author: Kevin Mauricio Menon Ribeiro , PR
Co-Authors: Kevin Mauricio Menon Ribeiro, Gabriel do Amaral, Eduardo Márcio de Oliveira Lopes, José Manoel Balthazar, Alexandre de Macêdo Wahrhaftig
Presenter: Kevin Mauricio Menon Ribeiro

doi://10.26678/ABCM.COBEM2023.COB2023-0142

A FRAMEWORK OF CANTILEVER BEAM FOR DAMAGE DETECTION USING ARTIFICIAL NEURAL NETWORKS

Submission Author: Amanda Aryda Silva Rodrigues de Sousa , DF
Co-Authors: Amanda Aryda Silva Rodrigues de Sousa, Marcela Machado
Presenter: Amanda Aryda Silva Rodrigues de Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-1541

Spectral Analysis of Fatigue in Drill Strings under Torsional Vibrations

Submission Author: Sandro Valente , RJ
Co-Authors: Sandro Valente, Thiago Ritto, DANIEL CASTELLO
Presenter: Sandro Valente

doi://10.26678/ABCM.COBEM2023.COB2023-1004

Investigation of the dynamic behavior of reinforced beams

Submission Author: Thiago de Paula Sales , SP
Co-Authors: Lucas Henrique Bastos Oliveira, Vinicius Germanos Cleante, Thiago de Paula Sales, Domingos Rade
Presenter: Lucas Henrique Bastos Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-1439

MODAL MAPPING AND MAIN TRANSFER FUNCTION ANALYSIS OF A SAE BAJA VEHICLE

Submission Author: Abner da Silveira Alves , PB
Co-Authors: Abner da Silveira Alves, Márcio Diniz da Silva, Antonio Almeida Silva
Presenter: Antonio Almeida Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0582

Vehicle dynamics 18

Validation of the model to the stability of heavy vehicles calculation

Submission Author: Gonzalo Moreno , SC
Co-Authors: Gonzalo Moreno, Rodrigo de Souza Vieira, Daniel Martins
Presenter: Gonzalo Moreno

doi://10.26678/ABCM.COBEM2023.COB2023-0651

Methodology for subjective driveability calibration of a passenger vehicle using a Drive-in-Motion (DiM) simulator

Submission Author: Rogério Jorge Amorim , MG
Co-Authors: Rogério Jorge Amorim, Athos Carvalho, Sergio Hanriot, Bruno Silveira, Caio Campanha, Tiago Caldas Lodi
Presenter: Rogério Jorge Amorim

doi://10.26678/ABCM.COBEM2023.COB2023-2281

Implementation of a vehicle dynamics data acquisition system on a scale prototype to detect dangerous driving patterns

Submission Author: Vinicius Marini , RS
Co-Authors: Caio Gabriel Vicentin, Julia Kerkoff Ladeira, Kays Abur, Valdemo Vilino Kahl Junior, Luciano de Souza Oliveira, André Costa, Nathan Pereira, Álisson Henrique Kolling, Matheus João Silva de Almeida, Marcia Pasin, Vinicius Marini
Presenter: André Costa

doi://10.26678/ABCM.COBEM2023.COB2023-0237

DEVELOPMENT OF A TRACTION CONTROL STRATEGY AND DYNAMIC MODELING OF A 4WD ELECTRIC TRACTOR

Submission Author: Wesllen Lins de Araujo , SP
Co-Authors: Wesllen Lins de Araujo, Tárcio André Dos Santos Barros, Vinícius de Galiza Vieira, GABRIEL MORAES, Ivan Camilo Arbelaez Ruiz, Jenyffer Santos , Angel Potin Garcia, Daniel Albiero
Presenter: Wesllen Lins de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-2434

A PROCEDURE BASED ON MULTIBODY DYNAMICS AND GENETIC ALGORITHM TO STUDY THE INFLUENCE OF THE HYDROPNEUMATIC SUSPENSION ON THE CABIN VIBRATION OF HAUL TRUCKS

Submission Author: Rodrigo Oliveira , MG
Co-Authors: Rodrigo Oliveira, Marco Túlio Faria
Presenter: Rodrigo Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0421

Vehicle stability using an automotive electronic system: yaw rate, side-slip angle, and roll rate control

Submission Author: Carlos Alberto Arronte Delgado , SP
Co-Authors: Carlos Alberto Arronte Delgado, Andrei Araujo Felix, Gad Ripari, Diego Colón, Bruno Augusto Angélico, Matheus Soares
Presenter: Carlos Alberto Arronte Delgado

doi://10.26678/ABCM.COBEM2023.COB2023-0498

Modelling and Control of a Passenger Vehicle with an Active Anti-Roll Bar

Submission Author: Andrei Araujo Felix , SP
Co-Authors: Éverton Lins de Oliveira, Andrei Araujo Felix, Diego Colón, Fernando Malvezzi, Tarcisio Antonio Hess Coelho
Presenter: Andrei Araujo Felix

doi://10.26678/ABCM.COBEM2023.COB2023-0883

H-Infinity control design for a full-vehicle suspension model with active anti-roll bar and electronic dampers

Submission Author: Matheus Soares , SP
Co-Authors: Matheus Soares, Diego Colón, Andrei Araujo Felix, Carlos Alberto Arronte Delgado
Presenter: Andrei Araujo Felix

doi://10.26678/ABCM.COBEM2023.COB2023-0499

DYNAMIC ANALYSES (MODAL AND FORCE VIBRATION) IN A RAILWAY VEHICLE MODEL WITH 25 DEGREES OF FREEDOM

Submission Author: Fernando Beghetto , PR
Co-Authors: Fernando Beghetto
Presenter: Fernando Beghetto

doi://10.26678/ABCM.COBEM2023.COB2023-0068

Optimization of the LQR and SDRE control scheme for a non-linear semi-active MR damper on a quarter vehicle model

Submission Author: Leonardo da Costa Rodrigues Ferreira , DF
Co-Authors: Leonardo da Costa Rodrigues Ferreira, Marcus Vinicius Girão de Morais
Presenter: Leonardo da Costa Rodrigues Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-1202

Modeling and validation of the longitudinal dynamics of a 2WD vehicle with mechanically driven CVT

Submission Author: André de Souza Mendes , SP
Co-Authors: Rodrigo Silva, Guilherme Maia, BRUNO JOSE SILVA, Gabriel Batista Macedo, Caio Rolemberg, André de Souza Mendes
Presenter: Rodrigo Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1662

Experimental Methods for Identifying Physical Parameters of Four-Wheeled Autonomous Vehicles

Submission Author: João Bezerra , RN
Co-Authors: João Bezerra, Felipe Wyatt Varga, Ely Carneiro de Paiva, Niederauer Mastelari, Rafael de Angelis Cordeiro, mauro ferreira koyama
Presenter: Niederauer Mastelari

doi://10.26678/ABCM.COBEM2023.COB2023-2060

SUSPENSION SYSTEM STUDY ON THE PUSH ROD DOUBLE WISHBONE MODEL WITH VARIABLE STIFFNESS ACTUATOR FOR PERFORMANCE GAIN IN VEHICLES ON THE NORMALIZED DOUBLE LANE CHANGE TEST

Submission Author: Guilherme Bernardi , SC
Co-Authors: Guilherme Bernardi, Rodrigo de Souza Vieira, Henrique Simas
Presenter: Guilherme Bernardi

doi://10.26678/ABCM.COBEM2023.COB2023-0824

PARAMETER ESTIMATION OF A SINGLE STAGE GEARBOX USING THE LEVENBERG-MARQUARDT METHOD

Submission Author: Tobias Rosa , RJ
Co-Authors: Tobias Rosa, Bruna Loiola, Elias Dias Rossi Lopes, Gustavo Simão Rodrigues
Presenter: Tobias Rosa

doi://10.26678/ABCM.COBEM2023.COB2023-0686

APC Military Vehicle - Lateral Dynamics Case Study

Submission Author: Pedro Falcão , RJ
Co-Authors: Gabrielle Bonella Rangel, Pedro Falcão, Tobias Rosa, Elias Dias Rossi Lopes, Gustavo Simão Rodrigues
Presenter: Tobias Rosa

doi://10.26678/ABCM.COBEM2023.COB2023-1990

Modelling of a Motorcycle with a Biodynamic Pilot and a New Integration Method

Submission Author: Leonardo Roso Colpo , RS
Co-Authors: Leonardo Roso Colpo, Alison Lima, Herbert Gomes, José Picoral
Presenter: Leonardo Roso Colpo

doi://10.26678/ABCM.COBEM2023.COB2023-0209

Study Of The Elastic Behavior Of The Secondary Suspension Spring Set in The Y32 Bogie Utilized in Vale Passenger Car

Submission Author: Victor Hugo Garcia de Campos , SP
Co-Authors: Victor Hugo Garcia de Campos, Ryan David Earl, Leonardo Bartalini Baruffaldi, Marco Bittencourt, Julismar Dadalto dos Santos
Presenter: Victor Hugo Garcia de Campos

doi://10.26678/ABCM.COBEM2023.COB2023-1490

ANALYSIS OF THE SUSPENSION ENERGY HARVERSTING POTENTIAL BY MEANS A 9 DOF NON-LINEAR TRUCK MODEL

Submission Author: Augusto Schmidt Lenz , RS
Co-Authors: Augusto Schmidt Lenz, João Gabriel Benedito Duarte, Mariana Damm Poli, Eduardo André Perondi
Presenter: Augusto Schmidt Lenz

doi://10.26678/ABCM.COBEM2023.COB2023-1146

Energy and Thermal Systems

Applied Heat and Mass Transfer 38

Experimental evaluation of the thermal behavior of hot water flow in a module-faucet system

Submission Author: Fernanda Perazzolo Disconzi , SC
Co-Authors: Giovanna Menegatti, Fernanda Perazzolo Disconzi, Fabricio Torres Borghi
Presenter: Fernanda Perazzolo Disconzi

doi://10.26678/ABCM.COBEM2023.COB2023-0419

Estimation of Spatial Varying Thermal Contact Conductance in Dual Layer Pipes Using the Reciprocity Functional Approach

Submission Author: Carlos Eduardo Polatschek Kopperschmidt , ES
Co-Authors: Carlos Eduardo Polatschek Kopperschmidt, Bruno Henrique Marques Margotto, Marcelo Colaco, Wellington Betencurte da Silva
Presenter: Carlos Eduardo Polatschek Kopperschmidt

doi://10.26678/ABCM.COBEM2023.COB2023-2368

Analysis of a thermal vacuum chamber project for nanosatellites tests

Submission Author: Damylle Donati , SC
Co-Authors: Vitória Tessari, Lucas Silva dos Santos, Carlos Eduardo Bibow Corrêa, Damylle Donati, kleber paiva, Egemael Viesser, Talita Possamai, Renato Oba
Presenter: Vitória Tessari

doi://10.26678/ABCM.COBEM2023.COB2023-0445

Transient analysis of a heating and humidification system for mechanical ventilator air for patients in intensive care

Submission Author: Francisco Kleber Regis Castro , SP
Co-Authors: Francisco Kleber Regis Castro, Murilo Gasparin Rampi, Isabela Fernanda Rocha Corrêa, Lauber Martins, Fernando Gallego Dias, JOSÉ VIRIATO COELHO VARGAS
Presenter: Francisco Kleber Regis Castro

doi://10.26678/ABCM.COBEM2023.COB2023-1367

Performance evaluation of standing wave thermoacoustic engines for different geometries

Submission Author: Caio Everton , SP
Co-Authors: Caio Everton, Flávio Bannwart
Presenter: Caio Everton

doi://10.26678/ABCM.COBEM2023.COB2023-1977

Mathematical Modeling and Experimental Validation of Heat Exchangers Operating as a Boiler Using Volume Elements Method

Submission Author: Diego de Lima Sousa , RN
Co-Authors: Diego de Lima Sousa, Wellington Balmant, Flávio Júnior Santiago Silva, Iago Gomes Costa, Anne Defranceschi Oliveira, Heloísa da Silva, JOSÉ VIRIATO COELHO VARGAS
Presenter: Diego de Lima Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-1170

Comparison of the performances of the wide-band based weighted-sum-of-gray-gases and box models in the calculation of non-gray boundaries at high pressures

Submission Author: Roberta Juliana Collet da Fonseca , RS
Co-Authors: Roberta Juliana Collet da Fonseca, Guilherme Crivelli Fraga, Francis França
Presenter: Roberta Juliana Collet da Fonseca

doi://10.26678/ABCM.COBEM2023.COB2023-2129

Low cost Peltier modules in evaluation of prismatic lithium-ion cells thermal behavior

Submission Author: Luciano Amaury dos Santos , SC
Co-Authors: Luciano Amaury dos Santos, Joaquim Manoel Gonçalves, Samuel Luna de Abreu, Daniel Godoy Costa, ANDRE LUIZ FUERBACK, ADRIANO DE ANDRADE BRESOLIN
Presenter: Luciano Amaury dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0728

THERMAL PERFORMANCE OF MINI FLAT PLATE HEAT PIPES FOR HIGH-POWER CHIPS

Submission Author: Larissa Krambeck , SC
Co-Authors: Larissa Krambeck, Kelvin Guessi Domiciano, Marcia Mantelli
Presenter: Larissa Krambeck

doi://10.26678/ABCM.COBEM2023.COB2023-0255

FLAT PLATE PULSATING HEAT PIPE FOR ELECTRONICS COOLING

Submission Author: Larissa Krambeck , SC
Co-Authors: Luis Alonso Betancur Arboleda, Larissa Krambeck, Kelvin Guessi Domiciano, Guilherme Carpes Zonta, Marcia Mantelli
Presenter: Luis Alonso Betancur Arboleda

doi://10.26678/ABCM.COBEM2023.COB2023-0817

EXPERIMENTAL STUDY ON VITRIFICATION OF CRYOPROTECTANTS USING THIN-FILM EVAPORATION OF NITROGEN

Submission Author: Henrique Vidaletti , RS
Co-Authors: Henrique Vidaletti, Álisson Renan Stochero da Silva, Jacqueline Copetti, Mario Henrique Macagnan, Jeferson Diehl de Oliveira, Elaine Maria Cardoso, Leonardo Manetti
Presenter: Álisson Renan Stochero da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0720

MODELING HEAT AND MASS TRANSFER WITH CHEMICAL KINETICS FOR THE PYROLYSIS OF OIL SLUDGE

Submission Author: Leandro Alcoforado Sphaier , RJ
Co-Authors: York Castillo Santiago, Isabela Florindo Pinheiro, Leandro Alcoforado Sphaier
Presenter: Leandro Alcoforado Sphaier

doi://10.26678/ABCM.COBEM2023.COB2023-1290

Analysis of radiation shields for the protection of polymeric patches employed in flare stacks

Submission Author: Luiz Cesar Coutinho Junior , RJ
Co-Authors: Luiz Cesar Coutinho Junior, Robson Silva, Jaqueline Diniz da Silva, Fabio Toshio Kanizawa, Kleber Marques Lisbôa, Leandro Alcoforado Sphaier
Presenter: Luiz Cesar Coutinho Junior

doi://10.26678/ABCM.COBEM2023.COB2023-1327

ARTIFICIAL NEURAL NETWORKS FOR PREDICTION OF THERMOSYPHON PERFORMANCE

Submission Author: Thiago Antonini Alves , PR
Co-Authors: Thomas Siqueira Pereira, Yara de Souza Tadano, Hugo Siqueira, Thiago Antonini Alves
Presenter: Thiago Antonini Alves

doi://10.26678/ABCM.COBEM2023.COB2023-1505

Application of GITT for the characterization of the Thermal Boundary Layer using a non-invasive method with a capacitive sensor

Submission Author: Fábio Lima , PB
Co-Authors: Fábio Lima, Francisco Belo, Dhiego Veloso, Gustavo Assad, Igor Silveira, Allan Giuseppe
Presenter: Fábio Lima

doi://10.26678/ABCM.COBEM2023.COB2023-0462

TECHNIQUE FOR THE SIMULTANEOUS ESTIMATION OF THERMAL PROPERTIES OF A COMPOSITE MATERIAL

Submission Author: Luiz Augusto Pereira de Abreu , MG
Co-Authors: Luiz Augusto Pereira de Abreu , Gabriel Vulcani, Mariana de Melo Antunes, Nícolas Pinheiro Ramos, Sandro Metrevelle Marcondes de Lima e Silva
Presenter: Mariana de Melo Antunes

doi://10.26678/ABCM.COBEM2023.COB2023-1763

Thermal performance of a low-cost cooling tower installed in a cheese production facility

Submission Author: Igino Guerra , PE
Co-Authors: Igino Guerra, Lorena Guimarães, vania lemos, Emmanuel Dutra, Luis Arturo Gómez Malagón
Presenter: Lorena Guimarães

doi://10.26678/ABCM.COBEM2023.COB2023-1328

THERMAL ANALYSIS OF THE IMPACT OF SIX MONTHS IN A 1U CUBESAT IN LEO

Submission Author: Damylle Donati , SC
Co-Authors: Rodrigo Cardozo, Talita Possamai, Damylle Donati, Renato Oba
Presenter: Rodrigo Cardozo

doi://10.26678/ABCM.COBEM2023.COB2023-0444

THREE-DIMENSIONAL NUMERICAL SIMULATION OF EQUIPMENT WITH A CIRCULATING FLUIDIZED BED AND AXIAL CYCLONE IN SEMI INDUSTRIAL SCALE

Submission Author: Guilherme Maciel , MG
Co-Authors: Guilherme Maciel, Karina Silva, Cassius Ferreira, Valério Luiz Borges, Solidônio Carvalho, Marcelo Braga dos Santos
Presenter: Marcelo Braga dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0771

ANALITICAL FORMULATION AND MICROSTRUCTURAL TRANSFORMATIONS IN INDUCTION HEATING

Submission Author: Raffael de Carvalho Gonçalves , SP
Co-Authors: Raffael de Carvalho Gonçalves, Elisan dos Santos Magalhães, Gabriel Saavedra
Presenter: Raffael de Carvalho Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1701

Experimental analysis of a wall-mounted thermosyphon radiator

Submission Author: Felipe Mercês Biglia , SP
Co-Authors: Felipe Mercês Biglia, Victor Vaurek Dimbarre, Allefe Chagas Vaz, Thiago Antonini Alves, PAULO HENRIQUE DIAS DOS SANTOS
Presenter: Allefe Chagas Vaz

doi://10.26678/ABCM.COBEM2023.COB2023-1455

NUMERICAL MODEL OF THE TETRAHYDROFURAN HYDRATE GROWTH KINETIC

Submission Author: Gino Noel Delgado Dextre , PR
Co-Authors: Gino Noel Delgado Dextre, Fabio Ernesto Mancilla Ramos, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Gino Noel Delgado Dextre

doi://10.26678/ABCM.COBEM2023.COB2023-2003

EXPERIMENTAL EVALUATION OF A PLATE-TYPE HEAT EXCHANGER USING THE THERMOSYPHON'S PRINCIPLE

Submission Author: Allefe Chagas Vaz , PR
Co-Authors: Victor Vaurek Dimbarre, Felipe Mercês Biglia, Allefe Chagas Vaz, PAULO HENRIQUE DIAS DOS SANTOS, Thiago Antonini Alves
Presenter: Victor Vaurek Dimbarre

doi://10.26678/ABCM.COBEM2023.COB2023-2023

Experimental study to analyze the temperature profile of a mashing process

Submission Author: Julio Santos , RJ
Co-Authors: Julio Santos, Leandro Alcoforado Sphaier, Fernando Peixoto
Presenter: Julio Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0393

INVESTIGATION OF A THIN LOOP HEAT PIPE WITH A NOVEL POROUS MEDIA

Submission Author: Kelvin Guessi Domiciano , SC
Co-Authors: Kelvin Guessi Domiciano, Larissa Krambeck, Marcia Mantelli
Presenter: Kelvin Guessi Domiciano

doi://10.26678/ABCM.COBEM2023.COB2023-0257

Transient model for the internal pressure of vacuum insulation panels

Submission Author: Cristiano Tibiriçá , SP
Co-Authors: Mateus Henrique Corrêa, Cristiano Tibiriçá
Presenter: Cristiano Tibiriçá

doi://10.26678/ABCM.COBEM2023.COB2023-0405

On the influence of asymmetric configurations of a magnetic field in the thermo-magnetic convection in a ferrofluid cavity An experimental investigation

Submission Author: Bruno Silveira de Lima , SP
Co-Authors: Bruno Silveira de Lima, Arthur França Martins, Flávio Bannwart
Presenter: Flávio Bannwart

doi://10.26678/ABCM.COBEM2023.COB2023-1633

Analysis of the magnetic field influence on ferrofluid heat exchangers for applications in thermoacoustic engines

Submission Author: Arthur França Martins , SP
Co-Authors: Arthur França Martins, Flávio Bannwart
Presenter: Flávio Bannwart

doi://10.26678/ABCM.COBEM2023.COB2023-1529

Finite integral transform analysis with homogenized time-dependent boundary conditions of 2-D cylindrical multi-layer composites solution for transient heat conduction applied to plug and abandonment of oil wells

Submission Author: Gabriel Saavedra , SP
Co-Authors: Gabriel Saavedra, Marcelo De Lemos
Presenter: Gabriel Saavedra

doi://10.26678/ABCM.COBEM2023.COB2023-1491

An Approximate Puff Combination Model for Heavy Gas Dispersion

Submission Author: Edson Chiaramonte , RS
Co-Authors: Edson Chiaramonte, Renato Letizia Garcia, sergio meth
Presenter: Edson Chiaramonte

doi://10.26678/ABCM.COBEM2023.COB2023-1041

Assessment of temperature and electric field effect on nickel recovery from spent catalyst via electro-leaching

Submission Author: Carolina Mocelin Gomes Pires , PR
Co-Authors: Lucas Bittencourt, Carolina Mocelin Gomes Pires, Haroldo Ponte
Presenter: Carolina Mocelin Gomes Pires

doi://10.26678/ABCM.COBEM2023.COB2023-2121

Numerical Simulation of Full-cone Sprays for Liquid Film Formation

Submission Author: Marcus Vinícius Pedron Carneiro , SC
Co-Authors: Júlio César Alves Ferreira, Marcus Vinícius Pedron Carneiro, Jader Riso Barbosa Jr.
Presenter: Júlio César Alves Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-1256

EXPERIMENTAL ANALYSIS OF THE DESALINATION PROCESS BY VACUUM ENHANCED AIR GAP MEMBRANE DISTILLATION IN A PILOT SYSTEM

Submission Author: Ingrid Curcino , RJ
Co-Authors: Ingrid Curcino, Thomás Rarian Padrão Costa, Guilherme Rosa , Abdul Orlando Cárdenas Gómez, Carolina Palma Naveira Cotta, Renato Machado Cotta
Presenter: Ingrid Curcino

doi://10.26678/ABCM.COBEM2023.COB2023-2145

Numerical Modeling of a Lithium-Ion Cell Using Axial Direct Cooling Strategies

Submission Author: Rodrigo Alonso Pires Júnior , MG
Co-Authors: Rodrigo Alonso Pires Júnior, Braz Cardoso Filho, Rudolf Huebner, Thales Alexandre Carvalho Maia
Presenter: Rodrigo Alonso Pires Júnior

doi://10.26678/ABCM.COBEM2023.COB2023-1121

Numerical Modeling and Qualitative Approach for Geometric Design of an Ultracompact Printed Circuit Heat Exchanger for Supercritical CO2

Submission Author: Bruno Henrique de Camargo Moreno , SP
Co-Authors: Bruno Henrique de Camargo Moreno, Jurandir Itizo Yanagihara, Leandro Salviano
Presenter: Bruno Henrique de Camargo Moreno

doi://10.26678/ABCM.COBEM2023.COB2023-0937

Flow pattern and pressure drop during air-water flow in horizontal channels with forced vibration

Submission Author: Fabio Toshio Kanizawa , SP
Co-Authors: Fabio Toshio Kanizawa, Matheus Constantino, Rian Mauricio Santana
Presenter: Fabio Toshio Kanizawa

doi://10.26678/ABCM.COBEM2023.COB2023-2013

MATHEMATICAL MODELING OF MICROALGAE OIL EXTRACTION THROUGH FIXED BED REACTOR WITH SOLVENT PERFUSION

Submission Author: Heloísa da Silva , PR
Co-Authors: Heloísa da Silva, Wellington Balmant, Anne Defranceschi Oliveira, Flávio Júnior Santiago Silva, Iago Gomes Costa, Diego de Lima Sousa, JOSÉ VIRIATO COELHO VARGAS, André Bellin Mariano
Presenter: Heloísa da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0850

EXPERIMENTAL STUDY OF A HORIZONTAL LIQUID FILM HEAT EXCHANGER CONFIGURATION

Submission Author: José Roberto Simões Moreira , SP
Co-Authors: Beethoven Narváez-Romo
Presenter: José Roberto Simões Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-2419

Computational Intelligence Applied to Thermal Systems 8

Diagnostic model for energy performance in the industry: Case study of micro and small companies

Submission Author: Lara Werncke Vieira , RS
Co-Authors: Lara Werncke Vieira, Renata Rech de Souza, Paola Mendes Albino, Paulo Smith Schneider
Presenter: Lara Werncke Vieira

doi://10.26678/ABCM.COBEM2023.COB2023-1521

Estimation of the Redistribution Behavior in the Biflux Anomalous Diffusion Problem

Submission Author: Douglas Corrêa , RJ
Co-Authors: Douglas Corrêa, Jefferson Gomes, David Pelta, Claudio Toledo, Antônio Silva Neto
Presenter: Douglas Corrêa

doi://10.26678/ABCM.COBEM2023.COB2023-1099

Experimental data reduction using the statistical computing for analysis of the battery interconnection tubes circuit of an electric vehicle.

Submission Author: Guilherme Plácido , SP
Co-Authors: Guilherme Plácido, Bruno Ferreira Rossanês, ALUISIO PANTALEAO, Leandro Salviano
Presenter: Guilherme Plácido

doi://10.26678/ABCM.COBEM2023.COB2023-0524

Predicting solar radiation in Minas Gerais using artificial intelligence techniques

Submission Author: João Nazareth , MG
Co-Authors: João Nazareth, Ricardo Furiati , Silvio GUIMARAES, Felipe Domingos Cunha, Cristiana Brasil Maia
Presenter: Ricardo Furiati

doi://10.26678/ABCM.COBEM2023.COB2023-1621

INTELLIGENT REGRESSION MODELING FOR PERFORMANCE PREDICTION OF A VAPOR COMPRESSION REFRIGERATION PROTOTYPE USING MACHINE LEARNING TECHNIQUES

Submission Author: Evandro Pedro Alves de Mendonça , PE
Co-Authors: Paulo Silva, Evandro Pedro Alves de Mendonça, Sérgio Franco, Alvaro Antonio Ochoa Villa, Gustavo de Novaes Pires Leite, JOSÉ ÂNGELO PEIXOTO DA COSTA, kilvio ferraz
Presenter: Felipe Roque de Albuquerque Neto

doi://10.26678/ABCM.COBEM2023.COB2023-0986

On the Prediction of Critical Heat Flux via Generalized Additive Models (GAMs)

Submission Author: Guilherme Borges Ribeiro , SP
Co-Authors: Renan Santos Barbosa, Camila de Souza, Guilherme Borges Ribeiro
Presenter: Renan Santos Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-0399

DATA-DRIVEN FLOW RECONSTRUCTION USING LOW FIDELITY SIMULATION FOR COMPRESSIBLE FLOW PREDICTIONS IN CONVERGENT-DIVERGENT NOZZLES

Submission Author: Allan Moreira de Carvalho , SP
Co-Authors: Allan Moreira de Carvalho, Daniel Dezan, Wallace Ferreira
Presenter: Allan Moreira de Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-0080

Numerical estimation of nonlinear volumetric heat capacity and Laser Beam Welding (LBW) efficiency

Submission Author: Ariel Flores Monteiro de Oliveira , SP
Co-Authors: Ariel Flores Monteiro de Oliveira, Elisan dos Santos Magalhães, Kahl Zilnyk
Presenter: Ariel Flores Monteiro de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0699

Heat and Mass Transfer Fundamentals 12

COMPARATIVE SURFACE ANALYSIS AND SOLUTIONING THERMOCOUPLE INTERNAL POSITION PROBLEM OF VERTICAL HEAT EXCHANGER TUBES USED IN THE FALLING FILM EVAPORATION PROCESS

Submission Author: Patrick Walter Rüdiger Scheidt , SC
Co-Authors: Patrick Walter Rüdiger Scheidt, Arthur Kleyton Azevedo de Araújo, Jessé Steinert Barbiaro, Tainan Andrioni, Rafael dos Santos Maximo, Júlio Passos
Presenter: Jessé Steinert Barbiaro

doi://10.26678/ABCM.COBEM2023.COB2023-1053

A MATHEMATICAL MODEL FOR POROUS PARALLEL FINS WITH CONTACT RESISTANCE AT THEIR BASE

Submission Author: Maria Laura Martins-Costa , RJ
Co-Authors: Vinícius Vendas Sarmento, Maria Laura Martins-Costa, ROGERIO GAMA
Presenter: Maria Laura Martins-Costa

doi://10.26678/ABCM.COBEM2023.COB2023-1094

An Approximate Dispersion Model of Nitrogen Compounds in the Atmosphere with Chemical Reaction

Submission Author: Edson Chiaramonte , RS
Co-Authors: Edson Chiaramonte, Renato Letizia Garcia, sergio meth
Presenter: Edson Chiaramonte

doi://10.26678/ABCM.COBEM2023.COB2023-1034

Assessment of the Thermo-Hydraulic Performance of Flow in Concentric Annular Arrangement with the Inner Dimpled Tube.

Submission Author: Gustavo Lousado Silva , SP
Co-Authors: Gustavo Lousado Silva, Andre Damiani Rocha, William Monte Verde
Presenter: Gustavo Lousado Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1709

A numerical study of heat and mass transfer of water droplets using different geometrical parameters

Submission Author: Diego Alexandre Agostini , SP
Co-Authors: Diego Alexandre Agostini, Iago Lessa Oliveira, Vicente Luiz Scalon
Presenter: Iago Lessa Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0760

Feasibility study of burning centrifuged sludge generated in a poultry slaughterhouse

Submission Author: Thiago Calixto Teixeira , PR
Co-Authors: Thiago Calixto Teixeira, Eduardo Burin, Letícia Isabela Romoda Ripi
Presenter: Eduardo Burin

doi://10.26678/ABCM.COBEM2023.COB2023-0739

Transient Thermal Analysis of Thermoplastic Composites Pipelines for Oil-Gas Multiphase Flow with Electric Heat Tracing Technology

Submission Author: Jinhong Yu , China
Co-Authors: Jinhong Yu, Su Jian, Chen An
Presenter: Jinhong Yu

doi://10.26678/ABCM.COBEM2023.COB2023-2352

Two-phase frictional pressure drop at high saturation temperatures in a horizontal micro-scale channel

Submission Author: Daniel Borba Marchetto , SP
Co-Authors: Daniel Borba Marchetto, Rémi Revellin, Gherhardt Ribatski
Presenter: Daniel Borba Marchetto

doi://10.26678/ABCM.COBEM2023.COB2023-0851

ANALYSIS OF THE THERMAL EFFICIENCY OF EDUCATIONAL LEARNING ENVIRONMENTS THROUGH NATURAL CONVECTION

Submission Author: Diego Alves de Miranda , SC
Co-Authors: Douglas Elias Cortiço, Diego Alves de Miranda
Presenter: Diego Alves de Miranda

doi://10.26678/ABCM.COBEM2023.COB2023-0075

Experimental determination of methane diffusivity in water and brine under hydrate formation conditions

Submission Author: Thales Sirino , PR
Co-Authors: Thales Sirino, Celina Kakitani, Luiz Fernando Santos De Vasconcelos, Joao Vitor Mendes Rocha, Dalton Bertoldi, Rigoberto Morales, Moisés Marcelino Neto
Presenter: Thales Sirino

doi://10.26678/ABCM.COBEM2023.COB2023-0521

EXPERIMENTAL INVESTIGATION OF WATER-MEG MIXING IN A HELE-SHAW CELL WITH CHANGE OF DIRECTION

Submission Author: Pedro Leineker Ochoski Machado , PR
Co-Authors: Pedro Leineker Ochoski Machado, Anna Liston, Leonardo Souza, Elcilane Freitas, Joel Karp, Amadeu Sum, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Pedro Leineker Ochoski Machado

doi://10.26678/ABCM.COBEM2023.COB2023-0570

On the Compatibility Between Numerical Model and Experiment of a Thermoacoustic Heat Exchanger

Submission Author: Geovane Costa Clemente , SP
Co-Authors: Geovane Costa Clemente, Flávio Bannwart
Presenter: Geovane Costa Clemente

doi://10.26678/ABCM.COBEM2023.COB2023-1964

Nuclear Energy 5

The transition of Research Reactor fuels from Dispersions to Monolithic

Submission Author: Daniel de Souza Gomes , SP
Co-Authors: Daniel de Souza Gomes
Presenter: Daniel de Souza Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0423

AN INVESTIGATION OF THE PERFORMANCE OF TRISO FUEL AND MOLTEN FLOURIDE SALTS

Submission Author: Daniel de Souza Gomes , SP
Co-Authors: Daniel de Souza Gomes
Presenter: Daniel de Souza Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0425

DEVELOPMENT OF A COMPUTATIONAL CODE FOR THERMODYNAMIC ANALYSIS OF ANGRA 2 AND 3 NUCLEAR POWER PLANTS

Submission Author: Leon Matos Ribeiro de Lima , RJ
Co-Authors: Tailana Souza, Leon Matos Ribeiro de Lima, Gabriely Carvalho da Silva, Su Jian
Presenter: Leon Matos Ribeiro de Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1849

ANALYSIS OF NUCLEAR DESALINATION USING REJECTED AND EXTRACTED HEAT IN SMALL MODULAR REACTOR WITH MEMBRANE DISTILLATION

Submission Author: Gabriel Caetano Gomes Ribeiro da Silva , RJ
Co-Authors: Gabriel Caetano Gomes Ribeiro da Silva, Renato Machado Cotta, Su Jian
Presenter: Gabriel Caetano Gomes Ribeiro da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2135

Hybrid DCMD and SWRO desalination using a small PWR of 75 MW(th) for cogeneration of water and electricity

Submission Author: Paulo Augusto Berquo de Sampaio , RJ
Co-Authors: Paulo Augusto Berquo de Sampaio, LUIZ FLAVIO ALVES, Maria de Lourdes Moreira
Presenter: Paulo Augusto Berquo de Sampaio

doi://10.26678/ABCM.COBEM2023.COB2023-0725

Numerical Heat Transfer 28

Counterflow heat exchanger simulation with the Lattice-Boltzmann Method

Submission Author: Vinicius Akyo Matsuda , MG
Co-Authors: Vinicius Akyo Matsuda, Ivan Talão Martins, Edilson Guimarães de Souza, Luben Cabezas Gómez
Presenter: Vinicius Akyo Matsuda

doi://10.26678/ABCM.COBEM2023.COB2023-1486

CONTACT THERMAL CONDUCTANCE ESTIMATION BY THE APPLICATION OF OPTIMIZATION ALGORITHMS

Submission Author: Cairo Ximenes , RJ
Co-Authors: Cairo Ximenes, Marcelo Colaco, Luiz A. S. Abreu
Presenter: Cairo Ximenes

doi://10.26678/ABCM.COBEM2023.COB2023-1540

Enhancement heat transfer in a flat plate solar collector with a corrugated tube under the thermosyphon effect

Submission Author: Ewerton Lopes , SP
Co-Authors: Ewerton Lopes, Leandro Salviano
Presenter: Ewerton Lopes

doi://10.26678/ABCM.COBEM2023.COB2023-0323

NUMERICAL ANALYSIS OF DIFFERENT CONFIGURATIONS OF A COMPLEX COMMERCIAL SINK SUBJECTED TO FORCED CONVECTIVE TURBULENT FLOWS

Submission Author: Elizaldo dos Santos , RS
Co-Authors: Tarciso Claudino, Liércio Isoldi, Luiz Alberto Oliveira Rocha, Paulo Drews-Jr, Elizaldo dos Santos
Presenter: Tarciso Claudino

doi://10.26678/ABCM.COBEM2023.COB2023-0389

Development of a Heat Transfer Correlation for Thermal Simulation of Finned Heat Sinks in Electronics Under Forced Convection

Submission Author: Aron Martins Ferreira Milagres , MG
Co-Authors: Gustavo Paul Exel, Aron Martins Ferreira Milagres, Vitor de Melo Braga, Rafaela Garcia, Cesar Deschamps
Presenter: Aron Martins Ferreira Milagres

doi://10.26678/ABCM.COBEM2023.COB2023-0852

Numerical Analysis of Thermal Insulation Performance in Heating Pipe Systems Using the Finite Volume Method

Submission Author: Diogo Bandeira de Melo Castelo Branco , MA
Co-Authors: Diogo Bandeira de Melo Castelo Branco, Lourival Filho, Paulo Roberto Campos Flexa Ribeiro Filho
Presenter: Diogo Bandeira de Melo Castelo Branco

doi://10.26678/ABCM.COBEM2023.COB2023-1054

Development of a Numerical Heat Transfer Model via FEM for Transport and Storage of Biological Material and Vaccines Based on Peltier Effect

Submission Author: Felipe Roque de Albuquerque Neto , PE
Co-Authors: Felipe Roque de Albuquerque Neto, Arthur Cleydson, Andrezza Tomás, JOSÉ ÂNGELO PEIXOTO DA COSTA, Alvaro Antonio Ochoa Villa
Presenter: Felipe Roque de Albuquerque Neto

doi://10.26678/ABCM.COBEM2023.COB2023-1850

CONSTRUCTAL DESIGN OF AN ISOTHERMAL BODY AND A LID-DRIVEN CAVITY FILLED WITH A METALLIC NANOFLUID

Submission Author: Rafael da Silveira Borahel , RS
Co-Authors: Rafael da Silveira Borahel, Priscila Rodrigues, Flavia Zinani, Luiz Alberto Oliveira Rocha
Presenter: Rafael da Silveira Borahel

doi://10.26678/ABCM.COBEM2023.COB2023-0326

Impact of the double longitudinal vortex generator on enhancement heat transfer for a wavy-fin compact heat exchanger with circular and elliptical tubes

Submission Author: Laís Bandini , SP
Co-Authors: Laís Bandini, Leandro Salviano
Presenter: Laís Bandini

doi://10.26678/ABCM.COBEM2023.COB2023-1414

Numerical analysis of the thermohydraulic performance of silver/water nanofluids in turbulent flow

Submission Author: Erick Oliveira do Nascimento , PA
Co-Authors: Erick Oliveira do Nascimento, ENIO PEDONE BANDARRA FILHO, Luben Cabezas Gómez
Presenter: Erick Oliveira do Nascimento

doi://10.26678/ABCM.COBEM2023.COB2023-1396

A Computational Heat Transfer Model for Thermite Reaction in Offshore Well Plugging and Abandonment Operation

Submission Author: Thiago Dias dos Santos , SP
Co-Authors: Rodrigo Gustavo Dourado da Silva, Thiago Dias dos Santos, Elisan dos Santos Magalhães
Presenter: Rodrigo Gustavo Dourado da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1333

Analysis via CFD of the battery interconnection pipeline circuit to the electric bus thermal management system

Submission Author: André Okamoto , SP
Co-Authors: André Okamoto, Danilo Albuquerque Ribeiro, Leandro Salviano, ALUISIO PANTALEAO
Presenter: André Okamoto

doi://10.26678/ABCM.COBEM2023.COB2023-0494

Hybrid integral transforms for analysis of combined laminar forced convection and thermal radiation

Submission Author: Dhiego Veloso , PB
Co-Authors: Dhiego Veloso, Carlos Antonio Cabral Santos, Fábio Lima, Gustavo Assad, Igor Silveira, Ryan R de Azevedo
Presenter: Dhiego Veloso

doi://10.26678/ABCM.COBEM2023.COB2023-0437

Numerical Verification of a Parallelized Code Run on GPU Applied to Moving Heat Source Autogenous Welding Processes

Submission Author: Ernandes José Gonçalves do Nascimento , SP
Co-Authors: Ernandes José Gonçalves do Nascimento, Arthur Mendonça de Azevedo, Elisan dos Santos Magalhães, Luiz Eduardo dos Santos Paes
Presenter: Ernandes José Gonçalves do Nascimento

doi://10.26678/ABCM.COBEM2023.COB2023-0222

Recursive Heat Flux Estimation in Nonlinear Heat Conduction using Kalman Filter and Kirchhoff Transform

Submission Author: César Cunnha Pacheco , RJ
Co-Authors: Arthur Anastácio, César Cunnha Pacheco
Presenter: Arthur Anastácio

doi://10.26678/ABCM.COBEM2023.COB2023-1071

Optimization of microchannel heat exchangers using genetic algorithms

Submission Author: Bruno Scaramuzza dos Reis , RJ
Co-Authors: Bruno Scaramuzza dos Reis, Elena Peñaranda, Paulo Roberto Siqueira da Costa Júnior, Eduardo Paiva dos Santos, Carolina Palma Naveira Cotta, Kleber Marques Lisbôa
Presenter: Bruno Scaramuzza dos Reis

doi://10.26678/ABCM.COBEM2023.COB2023-2042

ANALYSIS OF ELECTROOSMOTIC FLOW IN MICROCHANNELS THROUGH INTEGRAL TRANSFORMS

Submission Author: João Quaresma , PA
Co-Authors: waneise souza, João Quaresma, Emanuel Macêdo, Helder Kiyoshi Miyagawa, Renato Machado Cotta
Presenter: waneise souza

doi://10.26678/ABCM.COBEM2023.COB2023-0706

QUADTREE IMPLEMENTATION FOR H-ADAPTIVE MESH REFINEMENT: A CASE STUDY IN MULTI-DOMAIN PROBLEMS

Submission Author: Gabriel Nunes , SP
Co-Authors: Gabriel Nunes, Elisan dos Santos Magalhães, Guilherme Borges Ribeiro
Presenter: Gabriel Nunes

doi://10.26678/ABCM.COBEM2023.COB2023-2081

A PRELIMINARY NUMERICAL STUDY OF A THERMAL MANAGEMENT SYSTEM FOR ELECTRIC VEHICLE BATTERIES EMPLOYING MICROCHANNELS WITH TRIPLY PERIODIC MINIMAL SURFACES

Submission Author: Felipe Selmo , RS
Co-Authors: Felipe Selmo, Guilherme Henrique Fiorot
Presenter: Felipe Selmo

doi://10.26678/ABCM.COBEM2023.COB2023-2333

Comparison between pseudopotential and phase-field lattice Boltzmann method for the liquid-gas phase-change Stefan problem

Submission Author: Ivan Talão Martins , SP
Co-Authors: Ivan Talão Martins, Alfredo Jaramillo, Luben Cabezas Gómez
Presenter: Ivan Talão Martins

doi://10.26678/ABCM.COBEM2023.COB2023-0750

A view of the behaviour of the soybean aeration problem with realistic parameters

Submission Author: Daniel Rigoni , PR
Co-Authors: Daniel Rigoni, Marcio Pinto, Jotair Elio Kwiakowski Junior
Presenter: Daniel Rigoni

doi://10.26678/ABCM.COBEM2023.COB2023-1693

Analysis of Optimal Fin Spacing for Enhanced Heat Transfer in Horizontal Tubes

Submission Author: Sandi Souza , RN
Co-Authors: Sandi Souza, Thiago Cardoso de Souza
Presenter: Thiago Cardoso de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0673

Performance Verification of the Volumetric Thermal Capacitor Method Applied in Moving Heat Source Autogenous Welding Simulation Run in GPU with Enhanced Parallelized Code

Submission Author: Arthur Mendonça de Azevedo , RJ
Co-Authors: Arthur Mendonça de Azevedo, Ernandes José Gonçalves do Nascimento, Elisan dos Santos Magalhães
Presenter: Ernandes José Gonçalves do Nascimento

doi://10.26678/ABCM.COBEM2023.COB2023-0467

TOPOLOGY OPTIMIZATION OF A SIMPLE CONJUGATE FLUID HEAT SYSTEM WITH HEAT SOURCES AND CONVECTIVE BOUNDARY USING ADJOINT METHOD

Submission Author: Javier Aliaga Rivera , RJ
Co-Authors: Javier Aliaga Rivera, Marcos Sebastião de Paula Gomes
Presenter: Javier Aliaga Rivera

doi://10.26678/ABCM.COBEM2023.COB2023-2179

NUMERICAL STUDY ON THE LIKELIHOOD OF IGNITION OF MATERIALS NEARBY COLLAPSED COMPARTMENT WALLS DURING DWELLINGS' FIRES

Submission Author: Rodolfo Prediger Helfenstein , RS
Co-Authors: Rodolfo Prediger Helfenstein, Calisa Lemmertz, Felipe Roman Centeno
Presenter: Rodolfo Prediger Helfenstein

doi://10.26678/ABCM.COBEM2023.COB2023-0334

Evaluation of the SRI and the WSGG models in high pressure supercritical CO2 media

Submission Author: Felipe Ramos Coelho , SP
Co-Authors: Felipe Ramos Coelho, Vitor Olson, Francis França, Alexandre Kupka da Silva
Presenter: Felipe Ramos Coelho

doi://10.26678/ABCM.COBEM2023.COB2023-2282

Numerical optimization of the thermal insulation of an elbow pipe type connection of an electric bus cooling system using computational open source code

Submission Author: Danilo Albuquerque Ribeiro , SP
Co-Authors: Danilo Albuquerque Ribeiro, André Okamoto, Leandro Salviano, ALUISIO PANTALEAO
Presenter: Danilo Albuquerque Ribeiro

doi://10.26678/ABCM.COBEM2023.COB2023-0501

HEAT FLUX ESTIMATION IN THE TURNING PROCESS USING THE SEQUENTIAL METHOD WITH NON-CONSTANT FUTURE TIMES

Submission Author: Lucas Gouveia Bontempo , MG
Co-Authors: Lucas Gouveia Bontempo, Alisson Figueiredo, Igor Cezar Pereira
Presenter: Lucas Gouveia Bontempo

doi://10.26678/ABCM.COBEM2023.COB2023-1852

Renewable Energy 114

EVALUATION OF CORROSIVE PROCESSES, OF 304 STEEL IN BIODIESEL ENVIRONMENT, BY ELECTROCHEMICAL NOISE TECHNIQUE

Submission Author: Juliana David , PR
Co-Authors: Juliana David, Vinícius da Silva Moreira de Oliveira, Renata Bachmann Guimarães Valt, Maria José Jerônimo de Santana Ponte, Haroldo Ponte
Presenter: Juliana David

doi://10.26678/ABCM.COBEM2023.COB2023-0369

INFLUENCE OF METAL FOAM ON THE bioPCM MELTING PERFORMANCE

Submission Author: Fábio Becker , RS
Co-Authors: Fábio Becker, Jacqueline Copetti, Elaine Maria Cardoso, Mirella Callage da Silva
Presenter: Fábio Becker

doi://10.26678/ABCM.COBEM2023.COB2023-0740

Construction of an indirect exposure solar dryer for fruit drying

Submission Author: Bruno Araújo , PB
Co-Authors: Valnyr Lira, Emerson Jeronimo, Bruno Araújo
Presenter: Emerson Jeronimo

doi://10.26678/ABCM.COBEM2023.COB2023-2047

THEORETICAL POTENTIAL OF GREEN HYDROGEN PRODUCTION FROM BIOMASS IN MINAS GERAIS

Submission Author: Felipe Raul Ponce Arrieta , MG
Co-Authors: Fernando Jardim Borges da Cunha, Cristiana Brasil Maia, José Carlos Escobar Palacio, Felipe Raul Ponce Arrieta
Presenter: Fernando Jardim Borges da Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0796

Variability and sensitivity of two models used to estimate photovoltaic production

Submission Author: Nícolas M. F. T. S. Araújo , RN
Co-Authors: Nícolas M. F. T. S. Araújo
Presenter: Nícolas M. F. T. S. Araújo

doi://10.26678/ABCM.COBEM2023.COB2023-1969

Deployment of a Small-Scale Model for Evaluation of a Thermal Power Plant Engine Heating Solution Using Hybrid Thermal-Photovoltaic Collectors.

Submission Author: Alesson Itallo Ribeiro Dias da Silva , PE
Co-Authors: Alesson Itallo Ribeiro Dias da Silva, Victor César Pigozzo Filho, Luciano Barbosa
Presenter: Luciano Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-2166

FAULT DETECTION IN WIND TURBINES WITH TEMPERATURES ANALYSIS AND STATISTICAL MODELS.

Submission Author: Lucas Paiva , PE
Co-Authors: Lucas Paiva, Gustavo de Novaes Pires Leite, Alvaro Antonio Ochoa Villa, Alexandre Carlos Araújo da Costa, Leonardo Brennand , Marrison Gabriel Guedes de Souza
Presenter: Arthur Cleydson

doi://10.26678/ABCM.COBEM2023.COB2023-1461

EXPERIMENTAL EVALUATION OF BIODIESEL PRODUCTION FROM SOYBEAN OIL BY MICROWAVE RADIATION METHODOLOGY

Submission Author: Daniel Andrey Herrera Susa , MG
Co-Authors: Daniel Andrey Herrera Susa, Oscar Saul Hernandez mendonza, Daniel Pasquini, ENIO PEDONE BANDARRA FILHO, Wilson Norbey Romano Torres
Presenter: Daniel Andrey Herrera Susa

doi://10.26678/ABCM.COBEM2023.COB2023-1341

Methodology for evaluating the performance of a small-scale HAWT in a EEE wind tunnel

Submission Author: Pedro Esteves Duque , SP
Co-Authors: Pedro Esteves Duque, Celso Antonio Bittencourt Sales Junior, Angie Lizeth Espinosa Sarmiento, Diego Mauricio Yepes Maya, Felipe Eduardo de Farias
Presenter: Celso Antonio Bittencourt Sales Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0420

Use of microalgae for circular energy economy focused on agribusiness

Submission Author: Caroline Rusch Schulze , PR
Co-Authors: Caroline Rusch Schulze, Beatriz Jacob Furlan, Vanessa Kava, Gabriela Conor Figueiredo, Murilo Gasparin Rampi, JOSÉ VIRIATO COELHO VARGAS, Glaciela Kaschuk
Presenter: Caroline Rusch Schulze

doi://10.26678/ABCM.COBEM2023.COB2023-2283

PRODUCTION OF BRIQUETTES FROM EUCALYPTUS SP. SAWDUST USING A LIGNOCELLULOSIC RESIDUE FROM 2G ETHANOL PRODUCTION AS A BINDER

Submission Author: Gabriel Alexandre Pio , SP
Co-Authors: Gabriel Alexandre Pio, Bruno Silva, Juan Pablo Arteaga Ramos, José Caraschi, Carlos Manuel Romero Luna
Presenter: Gabriel Alexandre Pio

doi://10.26678/ABCM.COBEM2023.COB2023-1392

Combined solar-heat pump systems for heating diesel power plants in standby mode

Submission Author: Gabriel Pereira , SC
Co-Authors: Gabriel Pereira, Bruna de Oliveira Busson, Victor César Pigozzo Filho, Júlio Passos, Alesson Itallo Ribeiro Dias da Silva, Luciano Barbosa
Presenter: Gabriel Pereira

doi://10.26678/ABCM.COBEM2023.COB2023-1201

Analysis of a thermal-photovoltaic system with glycerin-based phase change material employed in Curitiba.

Submission Author: Danniella Rosa , PR
Co-Authors: Danniella Rosa, Marco Antonio Bertogna, Maria José Jerônimo de Santana Ponte, JOSÉ VIRIATO COELHO VARGAS, Stephan Hennings Och
Presenter: Danniella Rosa

doi://10.26678/ABCM.COBEM2023.COB2023-1471

Design and assembly of a magnetic circuit with four magnetic field regions applied to a thermomagnetic motor prototype

Submission Author: Dalila Torres , MG
Co-Authors: Dalila Torres, Clara Silva, Vinicius Souza de Jesus, Gustavo Costa Mendonça, Higor Caldas Rios, Hugo Cesar Coelho Michel, Carmela Maria Polito Braga, Paulo Vinicius Trevizoli, Marcelo Câmara
Presenter: Clara Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0488

Using solar energy to charge electrical vehicles, an analysis of the Brazilian northeast potential.

Submission Author: Arthur Martins Farias , SC
Co-Authors: Arthur Martins Farias, Luiz H. Silva Junior, Allan Ricardo Starke, Alexandre Kupka da Silva
Presenter: Arthur Martins Farias

doi://10.26678/ABCM.COBEM2023.COB2023-1967

Effects of Wavy Leading Edge on the NREL Phase VI Wind Turbine Annual Performance

Submission Author: Juan Flores Mezarina , SP
Co-Authors: Juan Flores Mezarina, Hernán Cerón-Muñoz
Presenter: Juan Flores Mezarina

doi://10.26678/ABCM.COBEM2023.COB2023-1312

Mathematical Modeling and Simulation of Mixotrophic Tetradesmus obliquus Growth

Submission Author: Murilo Gasparin Rampi , PR
Co-Authors: Murilo Gasparin Rampi, Gabriela Conor Figueiredo, Anne Defranceschi Oliveira, Wellington Balmant, Beatriz Jacob Furlan, André Bellin Mariano, JOSÉ VIRIATO COELHO VARGAS
Presenter: Murilo Gasparin Rampi

doi://10.26678/ABCM.COBEM2023.COB2023-2095

The use of bioethanol in the transportation sector: an overview of the Brazilian scenario

Submission Author: Pedro Tomasi Pedroso , SC
Co-Authors: Pedro Tomasi Pedroso, Luiz H. Silva Junior, Allan Ricardo Starke, Alexandre Kupka da Silva
Presenter: Pedro Tomasi Pedroso

doi://10.26678/ABCM.COBEM2023.COB2023-1406

MICROALGAL BIOMASS PRODUCTION OF “SCENEDESMUS MIX” THROUGH HETEROTROPHIC CULTIVATION

Submission Author: Anne Defranceschi Oliveira , PR
Co-Authors: Anne Defranceschi Oliveira, Eduardo Sassi carocci, Flávio Júnior Santiago Silva, Iago Gomes Costa, Murilo Gasparin Rampi, Diego de Lima Sousa, JOSÉ VIRIATO COELHO VARGAS, Vanessa Kava, André Bellin Mariano
Presenter: Anne Defranceschi Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-1528

A SIMPLE MODEL FOR THE SLOW STORAGE OF HYDROGEN USING PHYSICAL ADSORPTION

Submission Author: Ana Lustosa , RJ
Co-Authors: Ana Lustosa, Leandro Alcoforado Sphaier
Presenter: Ana Lustosa

doi://10.26678/ABCM.COBEM2023.COB2023-1368

TECHNICAL ANALYSIS OF THE USE OF BIOGAS PRODUCED IN THE STATE OF PARANÁ AS FUEL FOR HYDROGEN AND SYNGAS PRODUCTION THROUGH CHEMICAL LOOPING

Submission Author: Cristian Felipe Ardila Duran , PR
Co-Authors: Cristian Felipe Ardila Duran, Andres Enrique Requena Gonzalez, Cesar Adolfo Sotomonte, Carlos Eduardo Rodriguez Marquina
Presenter: Cristian Felipe Ardila Duran

doi://10.26678/ABCM.COBEM2023.COB2023-2142

Theoretical and experimental analysis of a hybrid solar-electric dryer

Submission Author: Gabriel M. B. Cruz , SP
Co-Authors: Gabriel M. B. Cruz, Vinicius Augusto Camatta Santana, frederico hippert, Bárbara Caroline Ricci Nunes, Cristiana Brasil Maia
Presenter: Gabriel M. B. Cruz

doi://10.26678/ABCM.COBEM2023.COB2023-0871

BIOENERGY VALORIZATION OF THE BLENDS (FOOD WASTE AND URBAN PRUNINGS) AS A POSSIBLE CANDIDATE FOR SOLID BIOFUELS PRODUCTION

Submission Author: Maurício Santos da Silva , MA
Co-Authors: Maurício Santos da Silva, Mariana Melo, Julie Brenda Santos da Silva, Arthur Sousa Silva, Glauber Cruz
Presenter: Glauber Cruz

doi://10.26678/ABCM.COBEM2023.COB2023-0897

Caracterização de Células Solares Adquiridas na China via Ali-Express

Submission Author: Rayan Soares , BA
Co-Authors: Rayan Soares, Maxson Vieira
Presenter: Rayan Soares

doi://10.26678/ABCM.COBEM2023.COB2023-0547

OPTICAL PERFORMANCE COMPARISON OF TWO CONFIGURATIONS OF LINEAR FRESNEL COLLECTORS RECEIVERS

Submission Author: Patricia Scalco , RS
Co-Authors: Patricia Scalco, Jacqueline Copetti, Mario Henrique Macagnan, André Santos, Diogo Canavarro, Jeferson Diehl de Oliveira
Presenter: Patricia Scalco

doi://10.26678/ABCM.COBEM2023.COB2023-0552

Natural gas and solar thermal energy for process steam generation in the Brazilian industry

Submission Author: Grazielli Bueno , PR
Co-Authors: Grazielli Bueno, Eduardo Burin
Presenter: Eduardo Burin

doi://10.26678/ABCM.COBEM2023.COB2023-0270

CHARACTERIZATION OF PARABOLIC CONCENTRATOR DISH WITH FLAT MIRRORS

Submission Author: Oscar Ricardo Sandoval Rodriguez , MG
Co-Authors: DAVID JEAN RODRIGUEZ CERRON, Oscar Ricardo Sandoval Rodriguez
Presenter: Oscar Ricardo Sandoval Rodriguez

doi://10.26678/ABCM.COBEM2023.COB2023-2136

Comparative analysis of five probability density functions applied to wind speed

Submission Author: Darío Gerardo Fantini , DF
Co-Authors: Darío Gerardo Fantini, Mario Benjamim Baptista de Siqueira, Reginaldo Nunes da Silva, Antonio Brasil Junior, Rafael Castilho Faria Mendes
Presenter: Mario Benjamim Baptista de Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-1823

Energy Recovery from Biogas in Landfills: Potential Analysis in a City in the Midwest of Minas Gerais.

Submission Author: Vinicius Fonseca da Silva , MG
Co-Authors: Vinicius Fonseca da Silva, Luis Fillipe Camargos, Ricardo Carpio
Presenter: Vinicius Fonseca da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0520

EVALUATION OF THE POTENTIAL FOR THE PRODUCTION OF RENEWABLE HYDROGEN BY SOLAR, WIND AND BIOMASS ENERGY: THE STATE OF PARANA

Submission Author: Leonardo Castro de Melo , PR
Co-Authors: Leonardo Castro de Melo, Marcelo Risso Errera, Electo Eduardo Lora
Presenter: Leonardo Castro de Melo

doi://10.26678/ABCM.COBEM2023.COB2023-2031

Energetic and Economic Analysis of the Biohydrogen Production Using Biogas from Vinasse in the Sugar Cane Industry

Submission Author: Germán Darío Picón Lescano , SP
Co-Authors: Germán Darío Picón Lescano, Regina Franciélle Silva Paulino, Celso Eduardo Tuna, José Luz Silveira
Presenter: Germán Darío Picón Lescano

doi://10.26678/ABCM.COBEM2023.COB2023-1557

Enhancing Efficiency and Thermal Potential of Earth-Air Heat Exchangers with Galvanized Materials and Elliptical Shapes

Submission Author: Ana Maria Domingues , RS
Co-Authors: Ana Maria Domingues, Honório Joaquim Fernando, Jairo Ramalho, Michel Kepes Rodrigues
Presenter: Ana Maria Domingues

doi://10.26678/ABCM.COBEM2023.COB2023-1445

ELECTRIC VEHICLE BATTERY MODEL IDENTIFICATION FROM DATA COLLECTED IN DYNAMOMETER TEST CONDITIONS

Submission Author: Joaquim Manoel Gonçalves , SC
Co-Authors: Joaquim Manoel Gonçalves, Samuel Luna de Abreu, Murillo Stein, Sergej Diel, Amir Antonio Martins Oliveira, Rui Araújo
Presenter: Joaquim Manoel Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1629

Experimental appraisal of long-term degradation of PV modules in Rio de Janeiro, Brazil

Submission Author: Felix do Rêgo Barros , RJ
Co-Authors: Felix do Rêgo Barros, Ebenézer Viana, Manoel Antônio da Fonseca Costa Filho
Presenter: Manoel Antônio da Fonseca Costa Filho

doi://10.26678/ABCM.COBEM2023.COB2023-0097

GENERATION OF HYDROGEN BY METALLIC WAY AND ITS APPLICATIONS FOR THE USE OF RENEWABLE ENERGY

Submission Author: Beatriz Jacob Furlan , PR
Co-Authors: Sophia Elana Bordin, Beatriz Jacob Furlan, Paulo Alexandre Silveira da Silva, Lauber Martins, Matheus Ben-Hur Ramirez Sapucaia, Rafael Silva Ribeiro Gonçalves, JOSÉ VIRIATO COELHO VARGAS, André Bellin Mariano
Presenter: Sophia Elana Bordin

doi://10.26678/ABCM.COBEM2023.COB2023-1773

An overview and a comparative analysis of the main technologies for hydrogen storage

Submission Author: Tamayo Zanforlin Pires de Almeida Motta Dias , SC
Co-Authors: Tamayo Zanforlin Pires de Almeida Motta Dias, Jhonatta Casagrande Bordignon, yogan Felipe Sganzerla, Guilherme Fidelis Peixer, Jaime Lozano, Jader Riso Barbosa Jr.
Presenter: Tamayo Zanforlin Pires de Almeida Motta Dias

doi://10.26678/ABCM.COBEM2023.COB2023-1337

COMBINED MACHINE LEARNING AND DECOMPOSITION MODELS BY PREDICTING URBAN WATER CONSUMPTION IN CURITIBA

Submission Author: Wilton Brayner , PR
Co-Authors: Wilton Brayner
Presenter: Wilton Brayner

doi://10.26678/ABCM.COBEM2023.COB2023-2036

An economy based on hydrogen and its utilization in renewable energies

Submission Author: Kauana Alessandra dos Santos , PR
Co-Authors: Kauana Alessandra dos Santos, Beatriz Jacob Furlan, Paulo Alexandre Silveira da Silva, Lauber Martins, Matheus Ben-Hur Ramirez Sapucaia, Rafael Silva Ribeiro Gonçalves, Dhyogo Miléo Taher, Wellington Balmant, JOSÉ VIRIATO COELHO VARGAS
Presenter: Kauana Alessandra dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2322

Multi-objective optimization with an economic-environmental focus of a hybrid renewable energy system in an isolated community in Brazil

Submission Author: Tarcísio Klein , MG
Co-Authors: Tarcísio Klein, Diego Mauricio Yepes Maya, Angie Lizeth Espinosa Sarmiento
Presenter: Tarcísio Klein

doi://10.26678/ABCM.COBEM2023.COB2023-0577

DEVELOPMENT OF ARTIFICIAL NEURAL NETWORKS (ANN) MODELS TO PREDICT THE PRODUCTION OF CUMULATIVE BIOGAS FROM FOOD WASTE (FW), FRUITS AND VEGETABLES WASTE (FVW) AND THEIR CODIGESTION (CD)

Submission Author: Florian Alain Yannick Pradelle , RJ
Co-Authors: Michel Carvalho, Florian Alain Yannick Pradelle, Brunno F. Santos
Presenter: Florian Alain Yannick Pradelle

doi://10.26678/ABCM.COBEM2023.COB2023-1040

REGIONAL ANALYSIS OF RESOURCES FOR POSSIBLE HYBRID SYSTEMS IN ISOLATED REGIONS IN BRAZIL

Submission Author: Amanda Klein , MG
Co-Authors: Amanda Klein, Diego Mauricio Yepes Maya, Angie Lizeth Espinosa Sarmiento
Presenter: Tarcísio Klein

doi://10.26678/ABCM.COBEM2023.COB2023-0446

Calibration of a low-cost digital hygrometer for measuring moisture in sugarcane bagasse

Submission Author: Gabriel Leal , MG
Co-Authors: Gabriel Leal, Julia Maria Leal , Angélica Gomes, Ricardo Carpio, Reginaldo Gonçalves Leão Junior
Presenter: Julia Maria Leal

doi://10.26678/ABCM.COBEM2023.COB2023-0533

Energy Autonomy in Sustainable Communities using Hybrid Solar PV-Battery-Hydrogen: A Review

Submission Author: David Mickely Jaramillo Loayza , MG
Co-Authors: David Mickely Jaramillo Loayza, Juan Jose Garcia Pabon, Christian Jeremi R. Coronado
Presenter: David Mickely Jaramillo Loayza

doi://10.26678/ABCM.COBEM2023.COB2023-1299

KINECT STUDY OF SUGARCANE BAGASSE COMPOUNDS IN INERT AND OXIDANT ATMOSPHERE

Submission Author: Miriam Ricciulli de Oliveira , SP
Co-Authors: Miriam Ricciulli de Oliveira, Gretta Larisa Aurora Arce Ferrufino, Carlos Maciel, Ivonete Ávila
Presenter: Miriam Ricciulli de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0162

Energy and exergy losses in photovoltaic-thermal module with polymeric heat exchanger

Submission Author: Bruna de Oliveira Busson , Buscando endereço...
Co-Authors: Bruna de Oliveira Busson, Uallas Henrique de Oliveira de Brito, Victor César Pigozzo Filho, Alexander Leyton Mopan, Júlio Passos
Presenter: Bruna de Oliveira Busson

doi://10.26678/ABCM.COBEM2023.COB2023-0373

Energy and economic analysis of an hybrid micro-CHP system with fuel cell using natural gas and photovoltaic panels for residential consumers in 10 Brazilian cities

Submission Author: Florian Alain Yannick Pradelle , RJ
Co-Authors: Renato Gabriel, Edson Junior, Florian Alain Yannick Pradelle, Sergio Braga, Epifanio M Ticona, Renata Nohra Chaar Pradelle, Eduardo Serra, Cesar Luiz Sobral Vieira
Presenter: Florian Alain Yannick Pradelle

doi://10.26678/ABCM.COBEM2023.COB2023-1022

OVERVIEW ON THE CALCIUM LOOPING PROCESS ( CaL ) AND REACTOR DESIGN

Submission Author: Robson Rocha Oliveira , SP
Co-Authors: Robson Rocha Oliveira, Gretta Larisa Aurora Arce Ferrufino, Carlos Manuel Romero Luna, José Caraschi, Murilo Silva, Cristiane Inácio Campos, Nicole Musielak, Nerio Arce Ferrufino
Presenter: Robson Rocha Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0839

EXPERIMENTAL DETERMINATION OF THE MINIMUM FLUIDIZATION VELOCITY OF THE AÇAÍ SEED TO BE USED IN FLUIDIZED BED FURNACES

Submission Author: Amanda Carvalho , PA
Co-Authors: Amanda Carvalho , Hendrick Zarate Rocha, Danielle R S Guerra, Manoel Fernandes Martins Nogueira, Arthur Vilhena Lima, Paloma Gama da Silva
Presenter: Amanda Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-2234

A COMPARATIVE STUDY BETWEEN THE COMBUSTION OF MINERAL COAL AND AÇAÍ SEED IN BOILERS BY MEANS OF THE CeSFaMB

Submission Author: Gabriel Willian Moreira Bezerra , PA
Co-Authors: Gabriel Willian Moreira Bezerra, Ana Paula Mattos, João Víctor Ribeiro Moreira
Presenter: Gabriel Willian Moreira Bezerra

doi://10.26678/ABCM.COBEM2023.COB2023-1016

Study for Application of Oscillating Hydrofoil in Offshore Wind Turbines

Submission Author: Guilherme Amaral do Prado Campos , RJ
Co-Authors: Guilherme Amaral do Prado Campos, Luciano Santos Constantin Raptopoulos, Max Suell Dutra
Presenter: Guilherme Amaral do Prado Campos

doi://10.26678/ABCM.COBEM2023.COB2023-1139

STUDY OF METHODOLOGIES FOR DETERMINING HIGHER AND LOWER HEATING VALUE THROUGH PROXIMATE ANALYSIS OF EUTERPE OLERACEA

Submission Author: Gabriel Willian Moreira Bezerra , PA
Co-Authors: Gabriel Willian Moreira Bezerra, Luiz Felipe da Silva Ferreira, Ana Paula Mattos, Fernando Henrique de Barbosa dos Santos, Alan Carneiro, João Víctor Ribeiro Moreira
Presenter: Luiz Felipe da Silva Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-1019

GREEN HYDROGEN PRODUCTION THROUGH THE ELECTROLYSIS PROCESS AND ITS POTENTIAL IN BRAZIL

Submission Author: Leonardo Pereira Felicidade , SC
Co-Authors: Leonardo Pereira Felicidade, Luiz H. Silva Junior, Allan Ricardo Starke, Alexandre Kupka da Silva
Presenter: Leonardo Pereira Felicidade

doi://10.26678/ABCM.COBEM2023.COB2023-1178

Mathematical modeling of immobilized microalgae cultivation associated with effluent treatment

Submission Author: Paulo Alexandre Silveira da Silva , PR
Co-Authors: Rafael Silva Ribeiro Gonçalves, Paulo Alexandre Silveira da Silva, Beatriz Jacob Furlan, Lauber Martins, Gabriela Conor Figueiredo, JOSÉ VIRIATO COELHO VARGAS
Presenter: Rafael Silva Ribeiro Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1049

Preliminary analysis on the effects of thermal aging and corrosion on optical and morphological properties of chromium-based absorber surfaces deposited by Magnetron Sputtering

Submission Author: Thaís Almeida , PB
Co-Authors: Thaís Almeida, Kelly Cristiane Gomes, Francielle Cristine Gonçalves
Presenter: Thaís Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-2076

MATHEMATICAL MODEL OF A FILTER FOR CO2 REMOVAL OF CONTINUOUS GAS SUPPLY FOR AN ALKALINE MEMBRANE FUEL CELL

Submission Author: Matheus Ben-Hur Ramirez Sapucaia , PR
Co-Authors: Matheus Ben-Hur Ramirez Sapucaia, Beatriz Jacob Furlan, Fábio Furtado, Lauber Martins, Wellington Balmant, JOSÉ VIRIATO COELHO VARGAS
Presenter: Matheus Ben-Hur Ramirez Sapucaia

doi://10.26678/ABCM.COBEM2023.COB2023-2340

MODELING AND SIMULATION OF GREEN HYDROGEN GENERATION – A REVIEW

Submission Author: Roque Martins Duarte Junior , PR
Co-Authors: Roque Martins Duarte Junior, Rômulo Rodrigues, Janine Padilha Botton, Cezar Otaviano Ribeiro Negrao
Presenter: Roque Martins Duarte Junior

doi://10.26678/ABCM.COBEM2023.COB2023-1365

DESALINATION PROCESS POWERED BY SOLAR ENERGY

Submission Author: José Roberto Simões Moreira , SP
Co-Authors: Beethoven Narváez-Romo
Presenter: José Roberto Simões Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-2418

Modeling a PV/T system using the thermal resistance method

Submission Author: Amabile Valani Pessoti , ES
Co-Authors: Amabile Valani Pessoti, Arthur Monteiro Filho, Carlos Eduardo Silva Abreu, Rodrigo Fiorotti, Arthur Amorim
Presenter: Amabile Valani Pessoti

doi://10.26678/ABCM.COBEM2023.COB2023-1277

Performance analysis of a thermal photovoltaic system using water cooling and thermal storage.

Submission Author: Evandro Cherubini Rolin , PR
Co-Authors: Evandro Cherubini Rolin, Luís Mauro Moura, Gabriel Rabelo Thomaz
Presenter: Gabriel Rabelo Thomaz

doi://10.26678/ABCM.COBEM2023.COB2023-0692

A comparison between analytical and numerical results for the performance of a small-scale solar chimney

Submission Author: Cristiana Brasil Maia , MG
Co-Authors: Cristiana Brasil Maia, Janaína de Oliveira Castro Silva, Matheus Augusto Ferreira Soares , Elizaldo dos Santos
Presenter: Cristiana Brasil Maia

doi://10.26678/ABCM.COBEM2023.COB2023-0203

Impact of economic changes after the year 2022 on the economic viability of photovoltaic microgeneration in homes in the city of Fortaleza, Brazil.

Submission Author: Juan Jose Garcia Pabon , MG
Co-Authors: Brunna Sousa, Diego Mauricio Yepes Maya, Juan Jose Garcia Pabon
Presenter: Juan Jose Garcia Pabon

doi://10.26678/ABCM.COBEM2023.COB2023-1401

TRANSIENT THERMAL-ELECTRICAL MODEL FOR SIMULATING A PHOTOVOLTAIC MODULE

Submission Author: Fabiano Cordeiro Cavalcanti , PB
Co-Authors: Thaís de Vasconcelos Silva, Fabiano Cordeiro Cavalcanti, Cristiane Kelly Ferreira da Silva, Gilberto Augusto Amado Moreira
Presenter: Fabiano Cordeiro Cavalcanti

doi://10.26678/ABCM.COBEM2023.COB2023-0135

Experimental study and energy performance analysis of a vapor compression refrigerator powered by photovoltaic solar energy for regions without electrification

Submission Author: Davi Severo Lopes , MG
Co-Authors: Davi Severo Lopes, Willian Moreira Duarte, Luiz Machado, Beatriz Alves , Raphael Nunes Nunes de Oliveira
Presenter: Willian Moreira Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-0950

GASIFICATION OF SMUGGLED CIGARETTES FOR SYNTHESIS GAS AND ENERGY PRODUCTION

Submission Author: Moises Mbie , MG
Co-Authors: Moises Mbie, Eduardo Marson, Alam Trovó, Valério Luiz Borges, Marcelo Braga dos Santos, Solidônio Carvalho
Presenter: Marcelo Braga dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0687

MAPPING OF URBAN SOLID WASTE, RECYCLABLE AND ORGANIC MATERIALS: CASE STUDY OF SÃO JOSÉ DOS PINHAIS/PARANÁ

Submission Author: Eliana Leal Ferreira Hellvig , PR
Co-Authors: Eliana Leal Ferreira Hellvig, Thais Helena Sydenstricker Flores-Sahagun
Presenter: Eliana Leal Ferreira Hellvig

doi://10.26678/ABCM.COBEM2023.COB2023-0340

ENERGY DENSIFICATION OF SUGARCANE BAGASSE BRIQUETTE THROUGH OXIDATIVE TORREFACTION IN MINERAL LAYER

Submission Author: Juan Pablo Arteaga Ramos , SP
Co-Authors: Juan Pablo Arteaga Ramos, Gabriel Alexandre Pio, Bruno Silva, José Caraschi, Carlos Manuel Romero Luna, Ivonete Ávila
Presenter: Juan Pablo Arteaga Ramos

doi://10.26678/ABCM.COBEM2023.COB2023-1371

Integration of micro hydroelectric power plants in a multipurpose bridge-dam in the Rural Amazon

Submission Author: Vitória Portilho , PA
Co-Authors: Vitória Portilho, Natalia Marcia Das Graças, Rodolfo Ramalho, Davi Edson Sales e Souza, Manoel Sena, Claudio Blanco, André Luiz Amarante Mesquita
Presenter: André Luiz Amarante Mesquita

doi://10.26678/ABCM.COBEM2023.COB2023-1569

Artificial intelligence for fault isolation in wind energy conversion systems

Submission Author: César Tadeu Nasser Medeiros Branco , SC
Co-Authors: César Tadeu Nasser Medeiros Branco, Jonny Silva
Presenter: César Tadeu Nasser Medeiros Branco

doi://10.26678/ABCM.COBEM2023.COB2023-1348

THERMOECONOMIC ANALYSIS OF CO2 ALLOCATION AND INFLUENCE OF THE APPLICATION OF SOLAR COLLECTORS IN A THERMAL MDF PRODUCTION PLANT IN THE NORTH OF ESPÍRITO SANTO.

Submission Author: Felipe Malheiros , ES
Co-Authors: Felipe Malheiros, Carlos Filipe Lacerda Martins, Davi Pereira Garcia, Matheus Alves Lima, Tadeu Santos de Souza Reis
Presenter: Matheus Alves Lima

doi://10.26678/ABCM.COBEM2023.COB2023-2172

ENERGY ANALYSIS OF HYBRID PV-T SOLAR ASSITED HEAT PUMP VERSUS TRADITIONAL PV PANEL AND VACUUM SOLAR HEATER.

Submission Author: Giovanni Augusto Petrucci , MG
Co-Authors: Giovanni Augusto Petrucci, Juan Jose Garcia Pabon
Presenter: Giovanni Augusto Petrucci

doi://10.26678/ABCM.COBEM2023.COB2023-0990

HYDROGEN-RICH SYNGAS PRODUCTION: AN CHP INTEGRATED SYSTEM WITH STEAM GENERATOR HEAT EXCHANGER AND GAS TURBINE FOR HYDROGEN PRODUCTION

Submission Author: jackson costa da silva , BA
Co-Authors: jackson costa da silva, Carlos Veras
Presenter: jackson costa da silva

doi://10.26678/ABCM.COBEM2023.COB2023-1634

FUTURE ENERGY SOURCES OF MOBILE DRIVE SYSTEMS

Submission Author: Christian Heikel , Germany
Co-Authors: Christian Heikel, Ralf Förster
Presenter: Christian Heikel

doi://10.26678/ABCM.COBEM2023.COB2023-2388

Hybrid fuel cell-photovoltaic off-grid power generation using ethanol reforming

Submission Author: Florian Alain Yannick Pradelle , RJ
Co-Authors: Lucas Marçano, RENATA VIEIRA, Florian Alain Yannick Pradelle, Sergio Braga, Renata Nohra Chaar Pradelle, Epifanio M Ticona, Eduardo Serra, Cesar Luiz Sobral Vieira
Presenter: Lucas Marçano

doi://10.26678/ABCM.COBEM2023.COB2023-0933

A Critical Review of Thermal Management of Proton-Exchange Membrane Fuel Cells (PEMFC)

Submission Author: Paulo Vitor de faria , SC
Co-Authors: Paulo Vitor de faria, Júlio César Alves Ferreira, Guilherme Fidelis Peixer, Jaime Lozano, Jader Riso Barbosa Jr., Sergio Yesid Goméz González, Amir Antonio Martins Oliveira
Presenter: Júlio César Alves Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-2029

Mathematical Model to Convert Small Combustion Engine Trucks for Electric Traction with Photovoltaic Panel on the Vehicle Roof

Submission Author: Juan Carlos Azeredo Coutinho dos Santos , RJ
Co-Authors: Juan Carlos Azeredo Coutinho dos Santos, Luiz Peres, Manoel Antônio da Fonseca Costa Filho
Presenter: Manoel Antônio da Fonseca Costa Filho

doi://10.26678/ABCM.COBEM2023.COB2023-1171

Effects of canopy architecture in wind-energy potential for power generation by wind turbines

Submission Author: Mario Benjamim Baptista de Siqueira , DF
Co-Authors: Mario Benjamim Baptista de Siqueira, Antonio Brasil Junior, Luis Aramis Dos Reis Pinheiro
Presenter: Mario Benjamim Baptista de Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-2204

PARTICLE SIZE ANALYSIS BY BOX-BEHNKEN MATRIX

Submission Author: Abigail Cardoso Paes de Barros , SP
Co-Authors: Abigail Cardoso Paes de Barros, Kely Vieira, Natalia Ribeiro Galina, Ivonete Ávila
Presenter: Abigail Cardoso Paes de Barros

doi://10.26678/ABCM.COBEM2023.COB2023-0091

BIBLIOMETRIC ANALYSIS OF BIOMETHANE

Submission Author: Mônica Valéria dos Santos Machado , SP
Co-Authors: Mônica Valéria dos Santos Machado, Ivonete Ávila, João Carvalho
Presenter: Mônica Valéria dos Santos Machado

doi://10.26678/ABCM.COBEM2023.COB2023-0275

Energy recovery in mineral slurry pipelines

Submission Author: André Luiz Rodrigues Leite , MG
Co-Authors: André Luiz Rodrigues Leite, Thiago Pierini, Rodrigo Alonso Pires Júnior, Sidelmo Silva, Thales Alexandre Carvalho Maia
Presenter: Thiago Pierini

doi://10.26678/ABCM.COBEM2023.COB2023-1646

Syngas Production from Municipal Solid Waste for Dual-Fuel Engine Operation with Biodiesel: an Economic Analysis

Submission Author: Victor Arruda Ferraz de Campos , SP
Co-Authors: Victor Arruda Ferraz de Campos, lucas rezende, Luís Calado, Celso Eduardo Tuna, José Luz Silveira
Presenter: Victor Arruda Ferraz de Campos

doi://10.26678/ABCM.COBEM2023.COB2023-1738

Mathematical modeling of hydrogen production from metallic aluminum in pilot scale reactor

Submission Author: Dhyogo Miléo Taher , PR
Co-Authors: Dhyogo Miléo Taher, Wellington Balmant, Matheus Ben-Hur Ramirez Sapucaia, Lauber Martins, Nadia Edwin, Stephan Hennings Och, Diogo B. Pitz, Lucio Cardozo-Filho, André Bellin Mariano, JOSÉ VIRIATO COELHO VARGAS
Presenter: Dhyogo Miléo Taher

doi://10.26678/ABCM.COBEM2023.COB2023-0291

Fractional distillation of crude microalgae oil to produce renewable hydrocarbons.

Submission Author: Iago Gomes Costa , PR
Co-Authors: Iago Gomes Costa, JOSÉ VIRIATO COELHO VARGAS, Anne Defranceschi Oliveira, André Bellin Mariano, Vinicius Figueredo dos Santos, Diego de Lima Sousa, Flávio Júnior Santiago Silva, Heloísa da Silva
Presenter: Diego de Lima Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-2111

Experimental analyzes for growth in biomass production of the microalgae Tetradesmus obliquus in heterotrophic medium

Submission Author: Ana Júlia Ferreira Ganda , PR
Co-Authors: Ana Júlia Ferreira Ganda, Kauê Melenek, Murilo Gasparin Rampi, Gabriela Conor Figueiredo, Anne Defranceschi Oliveira, Pedro Mussi, André Bellin Mariano, Vanessa Kava, JOSÉ VIRIATO COELHO VARGAS
Presenter: Ana Júlia Ferreira Ganda

doi://10.26678/ABCM.COBEM2023.COB2023-2062

Biostimulant potential of the microalgae Tetradesmus obliquus cultivated in airlift photobioreactors as a coproduct of biofuels generation

Submission Author: Kauê Melenek , PR
Co-Authors: Kauê Melenek, Diego Corrêa, Ana Júlia Ferreira Ganda, Murilo Gasparin Rampi, Gabriela Conor Figueiredo, Anne Defranceschi Oliveira, Pedro Mussi, Victor Dobis Barros, André Bellin Mariano, Vanessa Kava, JOSÉ VIRIATO COELHO VARGAS
Presenter: Kauê Melenek

doi://10.26678/ABCM.COBEM2023.COB2023-0895

Application of the Inmetro Normative Instruction for classifying the energy efficiency of a federal public building

Submission Author: Paulo Roberto Lopes do Nascimento , RJ
Co-Authors: Paulo Roberto Lopes do Nascimento, Manoel Antônio da Fonseca Costa Filho
Presenter: Manoel Antônio da Fonseca Costa Filho

doi://10.26678/ABCM.COBEM2023.COB2023-1166

Ducted Wind Turbines: Technical Feasibility Study in Wind Energy Generation in Rio Grande do Norte

Submission Author: Taynara Tavares , RN
Co-Authors: Taynara Tavares, Gabriel Ivan Medina Tapia
Presenter: Taynara Tavares

doi://10.26678/ABCM.COBEM2023.COB2023-1125

Study of the Peltier-Seebeck Effect in MIG Welding Process

Submission Author: Adriane Mougo , RJ
Co-Authors: Guilherme Amaral do Prado Campos, Adriane Mougo, RODOLFO SOBRAL, Cristiano Carvalho, Joseph William Diniz Peixoto, Rodrigo Franco Côrtes
Presenter: Guilherme Amaral do Prado Campos

doi://10.26678/ABCM.COBEM2023.COB2023-1947

ANALYSING THE EFFECT OF HEAT TRANSFER ON THE BIODIESEL PRODUCTION FROM SPENT COFFEE GROUNDS

Submission Author: Ingryd Krinski , PR
Co-Authors: Ingryd Krinski, Vinícius Leite, Stephan Hennings Och, Viviana Mariani
Presenter: Ingryd Krinski

doi://10.26678/ABCM.COBEM2023.COB2023-1351

Thin layer drying kinetics of grapes dried in a hybrid solar-electric dryer

doi://10.26678/ABCM.COBEM2023.COB2023-0872

A COMPREHENSIVE REVIEW OF GREEN HYDROGEN PRODUCTION FROM SOLAR ENERGY USING THERMODYNAMICS CYCLES

Submission Author: Fernando Jardim Borges da Cunha , MG
Co-Authors: Fernando Jardim Borges da Cunha, Maria Clara de Oliveira Costa Vasconcelos, Felipe Raul Ponce Arrieta, José Carlos Escobar Palacio, Cristiana Brasil Maia
Presenter: Fernando Jardim Borges da Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0227

EFFICIENC SOLAR PHOTOVOLTAIC MODULES SUBMERGED AND PLACED ON THE WATER SURFACE: evaluation using thermal models

Submission Author: Humberto Faria Rezende , MG
Co-Authors: Humberto Faria Rezende, Ricardo Carpio, Francisco Sousa Junior, Vinicius Nunes
Presenter: Humberto Faria Rezende

doi://10.26678/ABCM.COBEM2023.COB2023-1274

Thermodynamic cycle analysis and combined heat and electricity generation with solar energy.

Submission Author: João Victor Siqueira Tenório Silva , PE
Co-Authors: João Victor Siqueira Tenório Silva , Andre Felippe Vieira da Cunha
Presenter: João Victor Siqueira Tenório Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1431

Life cycle impact assessment of different scenarios for biogas use in internal combustion engine

Submission Author: Maria dos Reis Santos Borges , DF
Co-Authors: Maria dos Reis Santos Borges, Sandra Luz
Presenter: Maria dos Reis Santos Borges

doi://10.26678/ABCM.COBEM2023.COB2023-1768

INTEGRATION OF SOLAR-ASSISTED COOLING SYSTEM AND HEAT PUMPS FOR INDUSTRIAL APPLICATIONS

Submission Author: Lorena Guimarães , PE
Co-Authors: Lorena Guimarães, Deivson Cesar Silva Sales, Emmanuel Dutra, Luis Arturo Gómez Malagón
Presenter: Lorena Guimarães

doi://10.26678/ABCM.COBEM2023.COB2023-1276

SIMULATION OF VOLTAGE STABILITY IN 14 BUS SYSTEM WITH THE INSERTION OF DISTRIBUTED PHOTOVOLTAIC GENERATION

Submission Author: wagner mazurkewicz da chagas , PR
Co-Authors: wagner mazurkewicz da chagas
Presenter: wagner mazurkewicz da chagas

doi://10.26678/ABCM.COBEM2023.COB2023-1388

Torrefaction of urban forest waste: a process modeling and simulation study using Aspen Plus software

Submission Author: Thiago da Silva Gonzales , DF
Co-Authors: Thiago da Silva Gonzales, Mayara Gabi Moreira, Giulia Lamas, Pedro Paulo Oliveira Rodrigues, Thais Barbosa, Matheus Guedes, Marcela Rodrigues, Simone Monteiro, EDGAR AMARAL SILVEIRA
Presenter: Mayara Gabi Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-0367

Energy harvesting for truck weigh-in-motion system

Submission Author: Rafael Baeta Neves , SP
Co-Authors: Rafael Baeta Neves, Michele Rodrigues Hempel Lima, Wellington Cássio Pinheiro, André Perin, Vinicius Grosso, Rafael Guariza
Presenter: Rafael Baeta Neves

doi://10.26678/ABCM.COBEM2023.COB2023-0969

Creation of a algorithm using the Blade Element Momentum (BEM) methodology for the aerodynamic analysis of horizontal axis wind turbines

Submission Author: Felipe Eduardo de Farias , MG
Co-Authors: Felipe Eduardo de Farias, Angie Lizeth Espinosa Sarmiento, Diego Mauricio Yepes Maya, Celso Antonio Bittencourt Sales Junior, Yina Faizully Quintero Gamboa
Presenter: Felipe Eduardo de Farias

doi://10.26678/ABCM.COBEM2023.COB2023-1248

Selective surface coatings: A bibliometric analysis

Submission Author: Gustavo César Pamplona de Sousa , PB
Co-Authors: Gustavo César Pamplona de Sousa, Aline da Silva Oliveira, Kelly Cristiane Gomes, Antonio Karlos Araújo Valença
Presenter: Gustavo César Pamplona de Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-0096

INVESTIGATION ON WALL TEMPERATURE FLUCTUATIONS DURING HYDROGEN PRODUCTION BY ELECTROLYSIS

Submission Author: Jeferson Diehl de Oliveira , RS
Co-Authors: Jeferson Diehl de Oliveira, Marcos Woyciekoski, Thomas Willians Leite , Elaine Maria Cardoso, Jacqueline Copetti
Presenter: Jeferson Diehl de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0268

Fluid dynamics analysis of a micro horizontal axis wind turbine

Submission Author: Guilherme Toquini , MG
Co-Authors: Guilherme Toquini, Celso Antonio Bittencourt Sales Junior, Felipe Eduardo de Farias, Angie Lizeth Espinosa Sarmiento, Diego Mauricio Yepes Maya
Presenter: Celso Antonio Bittencourt Sales Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0572

ELECTROCHEMICAL ANALYSIS OF A MEMBRANELESS ELECTROLYZER FOR GREEN HYDROGEN PRODUCTION

Submission Author: Emerson Barbosa dos Anjos , RJ
Co-Authors: Emerson Barbosa dos Anjos, Bruno Scaramuzza dos Reis, Samara da Silva Garcia, Caio Mayron de Carvalho Farolfe, Diego Busson de Moraes, Carolina Palma Naveira Cotta
Presenter: Emerson Barbosa dos Anjos

doi://10.26678/ABCM.COBEM2023.COB2023-1787

THE USE OF ADDITIVE MANUFACTURING TO PRODUCE PROTON EXCHANGE MEMBRANE ELECTROLYZER CELL COMPONENTS: A SYSTEMATIC REVIEW

Submission Author: Rodrigo Coelho , BA
Co-Authors: Leonardo Oliveira Passos da Silva, Bruno Caetano dos Santos Silva, Luã Fonseca Seixas, Samuel Miranda, André Souza Oliveira, Gerhard Ett, Rodrigo Coelho
Presenter: Bruna Callegari

doi://10.26678/ABCM.COBEM2023.COB2023-2113

NUMERICAL INVESTIGATION OF THE INTERMITTENT FLOW ONSET IN AN EVACUATED TUBE SOLAR COLLECTOR UNDER MULTIPLE OPERATING CONDITIONS

Submission Author: Fernando Claudio Spengler , RS
Co-Authors: Fernando Claudio Spengler, Jacqueline Copetti, Nicolas Valmórbida
Presenter: Fernando Claudio Spengler

doi://10.26678/ABCM.COBEM2023.COB2023-1354

Public policy for rooftop PV generation

Submission Author: Margarete Saldanha , RJ
Co-Authors: Margarete Saldanha, Manoel Antônio da Fonseca Costa Filho, BRUNO CAMPOS DOS SANTOS, Julio Nichioka
Presenter: Manoel Antônio da Fonseca Costa Filho

doi://10.26678/ABCM.COBEM2023.COB2023-0315

Modelling and simulation of a Linear Fresnel CPVT system

Submission Author: Darío Gerardo Fantini , DF
Co-Authors: Pedro Neto, Darío Gerardo Fantini, Mario Benjamim Baptista de Siqueira
Presenter: Mario Benjamim Baptista de Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-1761

Two-axis solar tracker for offset parabolic-dish solar concentrators

Submission Author: Eli Wilfredo Zavaleta Aguilar , SP
Co-Authors: George John Orbezo Alvarez, Vicente Luiz Scalon, Alexandre Duarte, Daniel Villas Bôas, Eli Wilfredo Zavaleta Aguilar
Presenter: George John Orbezo Alvarez

doi://10.26678/ABCM.COBEM2023.COB2023-1496

COMPARATIVE ANALYSIS OF GHG EMISSIONS IN THE LIFE CYCLES OF BATTERY ELECTRIC, HYBRID, AND CONVENTIONAL VEHICLES FUELED WITH ETHANOL/GASOLINE

Submission Author: Gueber Elias Mendes Santos Júnior , SP
Co-Authors: Gueber Elias Mendes Santos Júnior, Felipe Diniz, Jorge Enrique Velandia Vargas, Ana Paula Mattos
Presenter: Felipe Diniz

doi://10.26678/ABCM.COBEM2023.COB2023-1560

A comparation between a solar collector and a parabolic solar concentrator to heart water in the semi-arid region

Submission Author: Rudson de Souza Lima , RN
Co-Authors: Rudson de Souza Lima, Cássio Alencar Barreto, Eriomar Kalieudes
Presenter: Rudson de Souza Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1177

Numerical Simulation of Adsorbed Carbon Dioxide Storage Systems for CCS Applications

Submission Author: João de Sá Brasil Lima , SP
Co-Authors: João de Sá Brasil Lima, Bruno Chieregatti, Armando Zanone, Artur Parisi Dias dos Santos
Presenter: Bruno Chieregatti

doi://10.26678/ABCM.COBEM2023.COB2023-0627

DEVELOPMENT OF A HYBRID ENERGY GENERATION SYSTEM TO SERVE ISOLATED AREAS WITH A FOCUS ON SYSTEM OPTIMIZATION

Submission Author: Thais Gonçalves Xavier , MG
Co-Authors: Thais Gonçalves Xavier, Tarcísio Klein, Diego Mauricio Yepes Maya, Angie Lizeth Espinosa Sarmiento
Presenter: Tarcísio Klein

doi://10.26678/ABCM.COBEM2023.COB2023-0565

Analysis of the influence of microalgae as biofertilizers and integration into the renewable energy system

Submission Author: Beatriz Jacob Furlan , PR
Co-Authors: Ágatha Cardoso Hoffmann, Beatriz Jacob Furlan, Paulo Alexandre Silveira da Silva, Vanessa Kava, Gabriela Conor Figueiredo, Murilo Gasparin Rampi, JOSÉ VIRIATO COELHO VARGAS, Glaciela Kaschuk
Presenter: Gabriela Conor Figueiredo

doi://10.26678/ABCM.COBEM2023.COB2023-2336

ANALYSIS OF THE PROPOSED IMPLEMENTATION OF A COMBINED GENERATION SYSTEM IN A SUGAR AND ALCOHOL PLANT

Submission Author: José Luciano B Moreira , CE
Co-Authors: José Luciano B Moreira, Samuel Bezerra da Gama Neto, Danyllo bento, monica carvalho, Adriano Marques
Presenter: José Luciano B Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-1756

CHARACTERIZATION OF THERMOPHYSICAL PROPERTIES OF PHASE CHANGE MATERIALS FOR THEIR IMPLEMENTATION IN SOLAR THERMAL ENERGY APPLICATIONS

Submission Author: Jesús David Rhenals Julio , Córdoba
Co-Authors: Jesús David Rhenals Julio, Cristina Isabel Cogollo Torres, Jorge Mario Mendoza Fandiño, Arnold Martinez
Presenter: Cristina Isabel Cogollo Torres

doi://10.26678/ABCM.COBEM2023.COB2023-2229

Thermo-Economic Analysis and Energy Policy 2

NATURAL GAS COGENERATION SYSTEM ASSISTED BY SOLAR ENERGY INTEGRATED TO A MECHANICAL REFRIGERATION FOR MUSSEL FARMS APPLICATIONS

Submission Author: Leonardo Pereira Felicidade , SC
Co-Authors: Leonardo Pereira Felicidade, Isadora Carminatti da Silva, Edson Bazzo
Presenter: Leonardo Pereira Felicidade

doi://10.26678/ABCM.COBEM2023.COB2023-1033

Assessing the Thermoeconomic Viability of Microalgae-Based Biofertilizers for Sustainable Agriculture: Economic and Environmental Benefits.

Submission Author: Nicholas Melenek , PR
Co-Authors: Nicholas Melenek, Beatriz Jacob Furlan, Anne Defranceschi Oliveira, Gabriela Conor Figueiredo, Rafael Silva Ribeiro Gonçalves, Murilo Gasparin Rampi, Kauê Melenek, Diego Corrêa, JOSÉ VIRIATO COELHO VARGAS
Presenter: Gabriela Conor Figueiredo

doi://10.26678/ABCM.COBEM2023.COB2023-0383

Thermodynamics and Thermal Systems 22

Electricity and Hydrogen Production by Cogeneration System Applied in a Fuel Station in Brazil: Energy Analysis of a Combined SOFC and Ethanol Steam Reforming Model

Submission Author: Paulo Cordaro , SP
Co-Authors: Paulo Cordaro, denis henrique corotti, Antonio Gallego, José Luz Silveira
Presenter: Paulo Cordaro

doi://10.26678/ABCM.COBEM2023.COB2023-0867

The performance of a suction valve installed on the piston of a variable-speed reciprocating compressor

Submission Author: Willian Silva , SC
Co-Authors: Willian Silva, Cesar Deschamps
Presenter: Willian Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0349

Hydrogen liquefaction, a review of the ongoing methods and a critical analysis of the current studies

Submission Author: Jhonatta Casagrande Bordignon , SC
Co-Authors: Jhonatta Casagrande Bordignon, Tamayo Zanforlin Pires de Almeida Motta Dias, yogan Felipe Sganzerla, Guilherme Fidelis Peixer, Jaime Lozano, Jader Riso Barbosa Jr.
Presenter: Jhonatta Casagrande Bordignon

doi://10.26678/ABCM.COBEM2023.COB2023-1419

EXPERIMENTAL STUDY AND MODELING OF A H2O/NH3/H2 SOLAR DIFFUSION-ABSORPTION REFRIGERATOR FOR VACCINE STORAGE IN REGIONS WITHOUT ELECTRIFICATION

Submission Author: Gustavo Sana Trindade , MG
Co-Authors: Gustavo Sana Trindade, Willian Moreira Duarte, Fabiano Drumond Chaves, Nathália Beatriz Amorim Santos , Luiz Machado
Presenter: Gustavo Sana Trindade

doi://10.26678/ABCM.COBEM2023.COB2023-0745

Thermo-hydraulic experimental analysis of multi-microchannel heat exchangers

Submission Author: Erick Daniel Rincón Castrillo , MG
Co-Authors: Erick Daniel Rincón Castrillo, Frank Wiliam Adolfo Blanco Ojeda, Gleyzer Martins, Oscar Saul Hernandez mendonza, ENIO PEDONE BANDARRA FILHO
Presenter: Gleyzer Martins

doi://10.26678/ABCM.COBEM2023.COB2023-1536

Thermodynamic analysis of a modified nacelle on a cruise flight to increase fuel economy and performance of the Boeing 737-900 with extended range

Submission Author: Caio Lucas De Oliveira Santos , MG
Co-Authors: Caio Lucas De Oliveira Santos, RUBEN ALEXIS MIRANDA CARRILLO, Carlos Eymel Campos Rodriguez
Presenter: Caio Lucas De Oliveira Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2371

Numerical analysis of the magnetic flux density profile impact on the total power produced by a linear thermomagnetic motor

Submission Author: Clara Silva , MG
Co-Authors: Clara Silva, Paulo Vinicius Trevizoli
Presenter: Clara Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0251

Comparison of energetic model applied to desalination unit with multiples effects

Submission Author: Erick Breno Azevedo dos Santos , RN
Co-Authors: Erick Breno Azevedo dos Santos, Eduardo José Cidade Cavalcanti
Presenter: Eduardo José Cidade Cavalcanti

doi://10.26678/ABCM.COBEM2023.COB2023-0766

Numerical development of a passive heat exchanger for electric vehicle batteries using Phase Change Material (PCM).

Submission Author: Luis Gonçalves , SP
Co-Authors: Luis Gonçalves, Guilherme Borges Ribeiro
Presenter: Luis Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1546

ASSESSMENT OF HEALTH PARAMETERS FOR AN INDIVIDUAL PRESENTING METABOLIC SYNDROME: AN EXERGETIC ANALYSIS

Submission Author: João Vitor Garcia , AL
Co-Authors: João Vitor Garcia, Weliton Martins, TAYNARA LAGO, Adriano Marques
Presenter: João Vitor Garcia

doi://10.26678/ABCM.COBEM2023.COB2023-1742

ENERGY, EXERGETIC AND ECONOMIC ANALYZES OF A KALINA CYCLE DRIVEN BY SOLAR THERMAL ENERGY IN THE BOM JESUS DA LAPA-BA CITY

Submission Author: Géssica Amorim , BA
Co-Authors: Géssica Amorim, Juan Jose Garcia Pabon, André Issao Sato
Presenter: Géssica Amorim

doi://10.26678/ABCM.COBEM2023.COB2023-1352

ANALYSIS OF A SOLAR/BIOMASS HYBRID POWER PLANT IN PARAIBA CITIES, BRAZIL

Submission Author: Beatriz Ribeiro Petrucci Padilha , PB
Co-Authors: Beatriz Ribeiro Petrucci Padilha, Michelli Gomes, Adriano Marques, TAYNARA LAGO
Presenter: Beatriz Ribeiro Petrucci Padilha

doi://10.26678/ABCM.COBEM2023.COB2023-0744

Analysis of fuel in surface heat exchangers for aircraft

Submission Author: Edemar Morsch Filho , SP
Co-Authors: Henrique Carreira Martins, Edemar Morsch Filho, Laio Oriel Seman
Presenter: Edemar Morsch Filho

doi://10.26678/ABCM.COBEM2023.COB2023-1425

Evaluation of the presence of carbon monoxide impact on CO2-rich mixture density and phase behavior at CCS process conditions.

Submission Author: Natália Kauana Gesser Miotto , SC
Co-Authors: Natália Kauana Gesser Miotto, Emaline Chiele Ferrari , Maria Fernanda Franzin , Antonio Marinho
Presenter: Natália Kauana Gesser Miotto

doi://10.26678/ABCM.COBEM2023.COB2023-2152

Thermodynamic and Environmental Evaluation of Solid Oxide Electrolysis Cells for Green Hydrogen Production

Submission Author: Diego Izidoro , MG
Co-Authors: Diego Izidoro, Silvio de Oliveira Junior
Presenter: Diego Izidoro

doi://10.26678/ABCM.COBEM2023.COB2023-1288

Experimental investigation of hydrate formation in crude oil and high salinity brines

Submission Author: Luiz Fernando Santos De Vasconcelos , PR
Co-Authors: Luiz Fernando Santos De Vasconcelos, Celina Kakitani, Moisés Marcelino Neto, Rigoberto Morales, Amadeu Sum
Presenter: Moisés Marcelino Neto

doi://10.26678/ABCM.COBEM2023.COB2023-0540

EXERGO-ENERGETIC ANALYSIS OF A SENSIBLE HEAT STORAGE SYSTEM IN POROUS MEANS

Submission Author: CAIO CEZAR NEVES , GO
Co-Authors: CAIO CEZAR NEVES, Mario Benjamim Baptista de Siqueira
Presenter: Mario Benjamim Baptista de Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-1942

Thermodynamic Analysis of a Polygeneration Plant Based on LNG-regasification for CO2 Capture and Air Liquid Storage

Submission Author: José Vicente Dangelo , SP
Co-Authors: Pedro Otávio de Carvalho Ramos, José Vicente Dangelo
Presenter: José Vicente Dangelo

doi://10.26678/ABCM.COBEM2023.COB2023-2215

Experimental Study and Simulation Model for Determining the Response Time of Thermocouples with Different Insulation Thicknesses

Submission Author: Katrine Barbosa Oliveira Chaves , MG
Co-Authors: Katrine Barbosa Oliveira Chaves, Fabiano Drumond Chaves, Juan Jose Garcia Pabon, Ricardo Junqueira Silva, Luiz Machado, Willian Moreira Duarte
Presenter: Katrine Barbosa Oliveira Chaves

doi://10.26678/ABCM.COBEM2023.COB2023-1058

Investigation of energy efficiency of an SOFC integrated with ethanol reformer using lumped models

Submission Author: Rafael de Camargo Catapan , SC
Co-Authors: Igor Silva Flôres Siqueira, Bruno Oechsler, Rafael de Camargo Catapan
Presenter: Igor Silva Flôres Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-0792

Evaluation of Energy Storage Capacity of Vegetable Oils for Applications as Bio-PCMs

Submission Author: Matheus Guedes , DF
Co-Authors: Matheus Guedes, Raquel Soares, Maedson Silva, Lucas Lira, Taygoara Oliveira, Simone Monteiro, Antonio Brasil Junior
Presenter: Matheus Guedes

doi://10.26678/ABCM.COBEM2023.COB2023-0854

Thermodynamic analysis of biogas fired chemical looping combustion with supercritical CO2 cycle for power generation with CO2 capture

Submission Author: Andres Enrique Requena Gonzalez , PR
Co-Authors: Andres Enrique Requena Gonzalez, Cristian Felipe Ardila Duran, Cesar Adolfo Sotomonte, Carlos Eduardo Rodriguez Marquina
Presenter: Andres Enrique Requena Gonzalez

doi://10.26678/ABCM.COBEM2023.COB2023-2141

Engineering Design

Case Studies and Industrial Experiences in Engineering 6

DEVELOPMENT OF HYDRO JETTING NOZZLES FOR INSULATOR WASHING

Submission Author: Lucas Luzzi , PR
Co-Authors: Lucas Luzzi, Fábio Nara, Alessandro Presznhuk Filho, Alison Monteiro, MATHEUS BRATI ROSSETTO, Amanda Cortez, Eduardo Yamao, Juliana Maia
Presenter: Lucas Luzzi

doi://10.26678/ABCM.COBEM2023.COB2023-2197

Diagnosis and application of the DMAIC methodology for air conditioner maintenance management: A case study of IFBA - Jequié Campus.

Submission Author: Danton Romulo da Costa Pitombo , BA
Co-Authors: Danton Romulo da Costa Pitombo, MARCIO ROCHA, RITA DE CASSIA SOUZA DE QUEIROZ
Presenter: Danton Romulo da Costa Pitombo

doi://10.26678/ABCM.COBEM2023.COB2023-1432

A thermal-analysis guided redesigning of uninterruptible power supply for energy storage applications

Submission Author: Rafael Guariza , SP
Co-Authors: Rafael Guariza, Michele Rodrigues Hempel Lima, Wellington Cássio Pinheiro, Felipe Ramos Braidotti
Presenter: Rafael Guariza

doi://10.26678/ABCM.COBEM2023.COB2023-1429

OPTIMIZATION OF PARTICULATE SALT FLOW ON A SCREW CONVEYOR USING DEM

Submission Author: Francisco Samuel Chaves , CE
Co-Authors: Francisco Samuel Chaves, Jackson Simoes, Diego Diniz, Walber Medeiros Lima, GILSOMARO BARBOSA DE MELO SILVA Gil, Neilor Santos
Presenter: GILSOMARO BARBOSA DE MELO SILVA Gil

doi://10.26678/ABCM.COBEM2023.COB2023-2093

DEVELOPMENT OF ROTORS FOR RIBBON BLENDER MIXERS LOOKING FOR GREATER EFFICIENCY

Submission Author: Luís Manoel de Paiva Souza , SP
Co-Authors: João Vinicius Duarte, Valdoel Junior, Luís Manoel de Paiva Souza
Presenter: Luís Manoel de Paiva Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0092

Challenges of interaction between Suppliers and OEMs in the New Product Development for companies in Brazil

Submission Author: Wallace Gianni Gomes , SP
Co-Authors: Wallace Gianni Gomes, Rogerio Scabim Morano, Paulo Lourenção
Presenter: Paulo Lourenção

doi://10.26678/ABCM.COBEM2023.COB2023-0132

Design Creativity and Innovation in Engineering Design 3

DEVELOPMENT OF A MICROCONTROLLER FOR MANUFACTURE OF CERAMICS SCAFFOLDS BY FREEZE CASTING PROCESS

Submission Author: João Paulo Santiago de Assis Silva , DF
Co-Authors: João Paulo Santiago de Assis Silva, Alysson Silva, Jones Yudi Mori Alves da Silva, Adriano Rosa
Presenter: João Paulo Santiago de Assis Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2046

INNOVATION IN THE DEFENSE SECTOR: A SYSTEMIC PERSPECTIVE

Submission Author: Marcelo Basto , DF
Co-Authors: Marcelo Basto, Fábio Lisboa, Tercio Brum
Presenter: Fábio Lisboa

doi://10.26678/ABCM.COBEM2023.COB2023-1556

3D SCANNING APPLICATION TO IDENTIFY ASSEMBLY EFFORTS INFLUENCE ON A BRAKE BOOSTER

Submission Author: Caleb Oliveira , SP
Co-Authors: Caleb Oliveira, Fernando Gentile, Leandro Cardoso da Silva
Presenter: Caleb Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0430

Design Education 3

Construction of a 1 to 5 Scale Vertical Intermittent Coffee Dryer Prototype

Submission Author: Aleson Gleik Silva Chaves , MG
Co-Authors: Aleson Gleik Silva Chaves, Katrine Barbosa Oliveira Chaves, Mateus Sousa , Fabiano Drumond Chaves
Presenter: Katrine Barbosa Oliveira Chaves

doi://10.26678/ABCM.COBEM2023.COB2023-1914

Technological tests on ABS specimens

Submission Author: Matheus Lopes , SP
Co-Authors: Matheus Lopes, Adriana Marques
Presenter: Matheus Lopes

doi://10.26678/ABCM.COBEM2023.COB2023-1916

Startup Experience Initiative: A Modern Approach to Integrating Education, Research, Entrepreneurship, and Soft Skills Training.

Submission Author: André Bellin Mariano , PR
Co-Authors: André Bellin Mariano, Flávio Júnior Santiago Silva, Ihana Aguiar Severo, Erick Cordeiro Kollross, JOSÉ VIRIATO COELHO VARGAS
Presenter: André Bellin Mariano

doi://10.26678/ABCM.COBEM2023.COB2023-1488

Design Process, Methodology, Methods, and Tools 11

Methodology for obtaining 3D CAD models from complex objects through digitization and numerical adjustment: heat exchanger plates

Submission Author: Bruna Larissa Tascheck , SC
Co-Authors: Bruna Larissa Tascheck, Talita Possamai, Sueli Fischer Beckert, Damylle Donati, Renato Oba, Rodrigo Santiago
Presenter: Bruna Larissa Tascheck

doi://10.26678/ABCM.COBEM2023.COB2023-0408

Goal-oriented requirements engineering applied in the design of a gyrostabilized turret of armored vehicles

Submission Author: Murillo Batista dos Santos , SP
Co-Authors: Murillo Batista dos Santos, Oswaldo Horikawa
Presenter: Murillo Batista dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0325

DESIGN OF A TEST BENCH FOR ELECTRIC PROPULSION SYSTEMS OF UNMANNED AERIAL VEHICLES

Submission Author: Yuri Silva Rodrigues , Procurando endereço...
Co-Authors: Yuri Silva Rodrigues, Ivi Silva, Suanny Mesquita, Alex Santos, Mateus Soares Souza, Ana Paula Mattos, Nelson Ferreira Gonçalves Junior
Presenter: Nelson Ferreira Gonçalves Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0908

MATHEMATICAL MODEL OF RISK MANAGEMENT IN A DEVICE FOR GENERATING ELECTRICITY FROM A SUSTAINABLE HYDROGEN PRODUCTION UNIT

Submission Author: Luiz Assumpção , PR
Co-Authors: Luiz Assumpção, Eduarda Zeni Neves, Lauber Martins, Rodrigo César Raimundo, JOSÉ VIRIATO COELHO VARGAS
Presenter: Luiz Assumpção

doi://10.26678/ABCM.COBEM2023.COB2023-0863

Application of a methodology for topological optimization of gears

Submission Author: luis gabriel de jesus beltrão , BA
Co-Authors: luis gabriel de jesus beltrão, Fabiano Borges
Presenter: luis gabriel de jesus beltrão

doi://10.26678/ABCM.COBEM2023.COB2023-0729

COMPARATIVE ANALYSIS OF THE STATIC CHARACTERISTICS OF SIMPLIFIED AND FINITE HYDRODYNAMIC JOURNAL BEARING MODELS

Submission Author: Aline de Almeida Soares , SP
Co-Authors: Aline de Almeida Soares, Gabriel Alves Marques, Flávio Yukio Watanabe
Presenter: Aline de Almeida Soares

doi://10.26678/ABCM.COBEM2023.COB2023-0308

APPLICATION OF TURBINE PROTOTYPING FOR TEACHING HYDRAULIC WORKS

Submission Author: Matheus Lopes , SP
Co-Authors: Matheus Lopes, Adriana Marques
Presenter: Matheus Lopes

doi://10.26678/ABCM.COBEM2023.COB2023-0956

Methodology for requirements and system design for the detection of dangerous driving

Submission Author: Vinicius Marini , RS
Co-Authors: André Costa, Gustavo Raguzzoni, Valdemo Vilino Kahl Junior, Julia Kerkoff Ladeira, Caio Gabriel Vicentin, Kays Abur, Luciano de Souza Oliveira, Álisson Henrique Kolling, Marcia Pasin, Vinicius Marini
Presenter: Vinicius Marini

doi://10.26678/ABCM.COBEM2023.COB2023-0239

A NEW PROCESSES MANAGEMENT METHOD ORIENTED TO SATISFY ORGANIZATIONAL NEEDS

Submission Author: Joel Carlos V. Reinhardt , SP
Co-Authors: Joel Carlos V. Reinhardt, Mariana de Freitas Dewes, Odair Lelis Gonçalez
Presenter: Joel Carlos V. Reinhardt

doi://10.26678/ABCM.COBEM2023.COB2023-0542

Development of the product structure tree of a modular micro-hydropower plant

Submission Author: Marina Baldissera de Souza , SC
Co-Authors: Marina Baldissera de Souza, Leticia Renata De carvalho, Sabrina Knoll Godoy Ilha, Ruben Solarte Bolaños, Daniel Martins, Antonio Carlos Valdiero, Luís Antônio Bortolaia
Presenter: Leticia Renata De carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-1168

Integrated Product Development Methodology Applied to a Resonant Fatigue Testing Bench for Shafts and Crankshafts

Submission Author: Artur Cantisano , SP
Co-Authors: Artur Cantisano, Luiz Fonseca, jefferson de oliveira gomes, Ronnie Rego, Tiago Colombo, Eduardo Garcia Muñoz
Presenter: Artur Cantisano

doi://10.26678/ABCM.COBEM2023.COB2023-2236

Design for "X" (Sustainability, Customization, Logistic, and other) 2

DfA-based Practices Guide for Polymer Injection Mold Assembly Design

Submission Author: Régis Scalice , SC
Co-Authors: Régis Scalice, Micaela Sanches Galicio
Presenter: Micaela Sanches Galicio

doi://10.26678/ABCM.COBEM2023.COB2023-0710

NUMERICAL MODELING OF A PLASTIC PALLET UNDER STATIC LOADING FOR SUSTAINABLE DEVELOPMENT

Submission Author: SERGIO LUIS RABELO DE ALMEIDA , SP
Co-Authors: SERGIO LUIS RABELO DE ALMEIDA, Ed Claudio Bordinassi, Renato Murbach
Presenter: Ed Claudio Bordinassi

doi://10.26678/ABCM.COBEM2023.COB2023-0232

Engineering Design + AI and Industry 4.0 5

ANALYSIS OF URBAN CYCLING MOBILITY USING IOT TECHNOLOGY

Submission Author: Ricardo Israel , PR
Co-Authors: Ricardo Israel, Guilherme Burda dos Santos, Isabela Abreu, Flávio Júnior Santiago Silva, JOSÉ VIRIATO COELHO VARGAS, André Bellin Mariano
Presenter: Ricardo Israel

doi://10.26678/ABCM.COBEM2023.COB2023-2091

Application of Low-Cost Microcontrollers for Temperature and Speed Analysis in Rotating Systems

Submission Author: José Sávyo Soares Lira , PB
Co-Authors: José Sávyo Soares Lira, Richard Senko
Presenter: José Sávyo Soares Lira

doi://10.26678/ABCM.COBEM2023.COB2023-1266

Challenges in the Implementation Processes of Augmented Reality in the Manufacturing Industry

Submission Author: Rafael Umada Cohen , SP
Co-Authors: Rafael Umada Cohen, Anderson Vicente Borille, Henrique Marques
Presenter: Rafael Umada Cohen

doi://10.26678/ABCM.COBEM2023.COB2023-2239

A systems engineering based methodology for digital twins implementation

Submission Author: Jones Yudi Mori Alves da Silva , DF
Co-Authors: Yasmin Gaudard, Andrea Cristina Santos, Jones Yudi Mori Alves da Silva
Presenter: Yasmin Gaudard

doi://10.26678/ABCM.COBEM2023.COB2023-1226

FAULT DETECTION IN BEARINGS BASED ON CONVOLUTIONAL NEURAL NETWORKS USING LOW-COST MEMS ACCELEROMETERS

Submission Author: Caique Movio Pereira de Souza , SP
Co-Authors: Lucas Almeida Willenshofer, Caique Movio Pereira de Souza, Rogério Daniel Dantas, Rene Oliveira, Vanessa Seriacopi, Wilson Carlos Silva Junior
Presenter: Lucas Almeida Willenshofer

doi://10.26678/ABCM.COBEM2023.COB2023-1271

Product and Project Management 1

MAPPING THE STRATEGIC TECHNOLOGICAL AREAS OF THE DESIGN FOR EXCELLENCE (DFX) IN THE AEROSPACE DOMAIN

Submission Author: Rogerio Copriva , SP
Co-Authors: Rogerio Copriva, Wesley Oliveira, Luis Gonzaga Trabasso
Presenter: Rogerio Copriva

doi://10.26678/ABCM.COBEM2023.COB2023-2361

Reliability and Maintainability 2

Method for Failure Modes Analysis and Reliability Enhancement of Grinding in Mineral Processing Plants

Submission Author: Tércio Lucca Brito Andrade , Bahi
Co-Authors: Tércio Lucca Brito Andrade, Fabiano Borges
Presenter: Tércio Lucca Brito Andrade

doi://10.26678/ABCM.COBEM2023.COB2023-1523

Reliability investigation for load-sharing models applied to refrigeration systems

Submission Author: Helio Fiori de Castro , SP
Co-Authors: tiago botega, Laís Bittencourt Visnadi, Helio Fiori de Castro
Presenter: tiago botega

doi://10.26678/ABCM.COBEM2023.COB2023-1329

Engineering Education

Teaching and Learning in Future Engineering Education 10

Experimental analysis and numerical-analitical discussion about the Young´s modulus on cantilever beam under statical elastic stress

Submission Author: Marcelo Acacio De Luca Rodrigues , SP
Co-Authors: Marcelo Acacio De Luca Rodrigues, Bruno Fernandes de Holanda
Presenter: Bruno Fernandes de Holanda

doi://10.26678/ABCM.COBEM2023.COB2023-0034

Analysis of needs and opportunities for creating an interdisciplinary laboratory to support in Automation and Systems Engineering courses

Submission Author: Edson Baal , RS
Co-Authors: Edson Baal, Tárik El Hayek Rocha Pitta de Araujo, Isaac Varela Brito Guimarães de Souza, Ruben Solarte Bolaños, Henrique Simas, Antonio Carlos Valdiero
Presenter: Edson Baal

doi://10.26678/ABCM.COBEM2023.COB2023-0831

Low-Cost Electrolyzer for Education in Renewable Energy

Submission Author: lucas rezende , SP
Co-Authors: lucas rezende, Victor Arruda Ferraz de Campos, Lucas Costa, José Luz Silveira, Celso Eduardo Tuna
Presenter: lucas rezende

doi://10.26678/ABCM.COBEM2023.COB2023-1555

Harpias - Stimulating women to enter and stay in engineering in Brazilian Amazon

Submission Author: Marina Weyl Costa , PA
Co-Authors: Marina Weyl Costa, Ivanete Pereira Lima, Lorrayne Sampaio
Presenter: Marina Weyl Costa

doi://10.26678/ABCM.COBEM2023.COB2023-1694

Adapting and implementing CDIO and Competency-Based Learning approaches to mechanical engineering education

Submission Author: André Luiz Tenório Rezende , RJ
Co-Authors: André Luiz Tenório Rezende, VICTOR SANTORO SANTIAGO, Gustavo Simão Rodrigues, Suzana Magalhães
Presenter: André Luiz Tenório Rezende

doi://10.26678/ABCM.COBEM2023.COB2023-2363

Educational robotics and movement maker applied on study of natural phenomena.

Submission Author: Erick Bernabe Zanelato , ES
Co-Authors: Erick Bernabe Zanelato, Ghabriel Barbieri Molinarolli, Douglas Goesse Cardoso, Mayara Barbosa de Souza
Presenter: Erick Bernabe Zanelato

doi://10.26678/ABCM.COBEM2023.COB2023-1737

Development of a pneumatic bench for testing truss bridges

Submission Author: Isaac Varela Brito Guimarães de Souza , SC
Co-Authors: Isaac Varela Brito Guimarães de Souza, Antonio Carlos Valdiero, Ruben Solarte Bolaños, Edson Baal, Tárik El Hayek Rocha Pitta de Araujo, Gabriel Petry, Sabrina Knoll Godoy Ilha, Leticia Renata De carvalho
Presenter: Isaac Varela Brito Guimarães de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0856

Critical view of the main stakeholders on the education of engineers provided by the Department of Mechanical Engineering at UFSC

Submission Author: Sergio Gargioni , SC
Co-Authors: Sergio Gargioni, Amir Antonio Martins Oliveira, Milton Pereira, Jessica Farias Pereira, Maria Eduarda Quinteiro Perosa, Bruna Carpes de Freitas
Presenter: Sergio Gargioni

doi://10.26678/ABCM.COBEM2023.COB2023-2367

Hands-on Activity with an Unconventional Harmonic Oscillator

Submission Author: Rubens Gonçalves Salsa Junior , RN
Co-Authors: Vinícius Lamas von Sohsten, Rubens Gonçalves Salsa Junior, Fabio Dalmazzo Sanches
Presenter: Vinícius Lamas von Sohsten

doi://10.26678/ABCM.COBEM2023.COB2023-0267

Didactic resources for remote practical activities in automotive maintenance

Submission Author: Lucas Silva Yoshida , SC
Co-Authors: Lucas Silva Yoshida, Vinícius Rodrigues Borba
Presenter: Lucas Silva Yoshida

doi://10.26678/ABCM.COBEM2023.COB2023-0322

Fluid Mechanics

Computational Fluid Dynamics 81

APPLICATION OF NUMERICAL SIMULATION IN THE ABS INJECTION MOLDING ANALYSIS PROCESS FOR IDENTIFICATION OF GAS OUTLETS

Submission Author: Diego Alves de Miranda , SC
Co-Authors: José Carlos Sanocki, Diego Alves de Miranda
Presenter: Diego Alves de Miranda

doi://10.26678/ABCM.COBEM2023.COB2023-0074

Numerical Analysis of the Blade and Tower Aerodynamics of the NREL 5 MW Wind Tower Project

Submission Author: Augusto Bornschlegell , MS
Co-Authors: Vinícius Massoni Pires, Reginaldo Ribeiro Sousa, Bruno Arantes Moreira, Augusto Bornschlegell
Presenter: Augusto Bornschlegell

doi://10.26678/ABCM.COBEM2023.COB2023-0090

NUMERICAL SIMULATION OF JET BUCKLING PHENOMENON OF VISCOELASTIC FLUID

Submission Author: Reginaldo Merejolli , MS
Co-Authors: Reginaldo Merejolli, Caroline Viezel, Laís Corrêa, Gilcilene Sanchez de Paulo
Presenter: Reginaldo Merejolli

doi://10.26678/ABCM.COBEM2023.COB2023-1246

ON THE APPLICATION OF PHYSICS-INFORMED NEURAL NETWORKS IN THE MODELLING OF ROLL WAVES

Submission Author: Bruno Fagherazzi , SP
Co-Authors: Bruno Fagherazzi, Valdirene Rocho, Guilherme Henrique Fiorot
Presenter: Bruno Fagherazzi

doi://10.26678/ABCM.COBEM2023.COB2023-1183

A comparative study of a transition model with a full turbulence model on the aerodynamic analysis of a wind turbine airfoil

Submission Author: Anderson de Moura Ribeiro , MG
Co-Authors: Anderson de Moura Ribeiro, Felipe Loureiro, Patricia Habib Hallak, Afonso Celso de Castro Lemonge
Presenter: Anderson de Moura Ribeiro

doi://10.26678/ABCM.COBEM2023.COB2023-0751

Using Neural Networks to Compute the Divergence of the Reynolds Stress Tensor with Fundamental Mean Flow Properties

Submission Author: Thales Arantes de Castelo Branco e Souza , SP
Co-Authors: Thales Arantes de Castelo Branco e Souza, William Wolf, Luiz Augusto Camargo Aranha Schiavo
Presenter: Thales Arantes de Castelo Branco e Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0079

Lagrangian Vortices With Corrected Core-Spreading Method and Large Eddy Simulation (LES)

Submission Author: Gabriel Ferraz Marcondes de Carvalho , MG
Co-Authors: Gabriel Ferraz Marcondes de Carvalho, Marília Vidille, Alex Bimbato, Luiz Antonio Alcântara Pereira
Presenter: Gabriel Ferraz Marcondes de Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-0306

Francis Generating Unit Modelling Through High-fidelity CFD Simulations

Submission Author: Leandro Jose Lemes Stival , PR
Co-Authors: Leandro Jose Lemes Stival, Leonardo Sicchieri, João Marcelo Vedovotto, Aldemir Ap Cavalini Jr
Presenter: Leandro Jose Lemes Stival

doi://10.26678/ABCM.COBEM2023.COB2023-0081

Reducing initial computational cost of complex turbulent flows simulations by using recorded data from a existent simulation

Submission Author: Johnatas Freitas , MG
Co-Authors: Johnatas Freitas, João Marcelo Vedovotto, ricardo serfaty, Millena Vale, Flavio de Oliveira Silva
Presenter: Johnatas Freitas

doi://10.26678/ABCM.COBEM2023.COB2023-0819

Particle Swarm Optimization and Tikhonov Regularization for source identification over complex regions

Submission Author: Roseane Albani , RJ
Co-Authors: Roseane Albani, Juan Pablo de Lima Costa Salazar, Vinicius Albani, Davidson Moreira, Antônio Silva Neto
Presenter: Juan Pablo de Lima Costa Salazar

doi://10.26678/ABCM.COBEM2023.COB2023-0893

Evaluating Ultrasonic Flow Meter Parameters through Computational Simulation of Flows with Flow Conditioner

Submission Author: TULIO RAFAEL PORTO , PB
Co-Authors: TULIO RAFAEL PORTO, Joao Alves de Lima, Tony Herbert Freire de Andrade, ANTONIO GILSON BARBOSA DE LIMA
Presenter: Joao Alves de Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1435

Steady-state hydrodynamic model of an underwater towed vehicle

Submission Author: Giovanna Ambrósio de Souza , SP
Co-Authors: Giovanna Ambrósio de Souza, Andrea Piga Carboni, André Fujarra, Anelize Zomkowski Salvi, Lucas Weihmann, Thiago Antonio Fiorentin
Presenter: Giovanna Ambrósio de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0980

Thin film theory applied to mathematical modeling of fluidynamic bearings

Submission Author: Thiago Assis da Silva , MG
Co-Authors: Thiago Assis da Silva, Aldemir Ap Cavalini Jr, Aristeu Silveira Neto
Presenter: Thiago Assis da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0603

A CFD Study on Airfoils Performance in Formula SAE

Submission Author: Marcos Vinicius Barbosa , PR
Co-Authors: Josue Lima de Camargo, Marcos Vinicius Barbosa
Presenter: Josue Lima de Camargo

doi://10.26678/ABCM.COBEM2023.COB2023-0697

RIVERBED EFFECT INFLUENCE IN A RIVER DEBRIS REMOVAL SOLUTION FLOATING BARRIER

Submission Author: Patrick Donegá Queiroz , SP
Co-Authors: Patrick Donegá Queiroz, Andre Mitsuo Kogishi, Felipe Santos de Castro, Joao Lucas Dozzi Dantas
Presenter: Patrick Donegá Queiroz

doi://10.26678/ABCM.COBEM2023.COB2023-1228

ELLIPTIC GRID GENERATION USING PARALLEL COMPUTING

Submission Author: Juan Carlos Assis da Silva , RJ
Co-Authors: Juan Carlos Assis da Silva, Rômulo Bessi Freitas, Leonardo Santos de Brito Alves
Presenter: Juan Carlos Assis da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0664

Numerical simulation of ventilation in subway car using CFD open-source code

Submission Author: Amanda Sayuri Oizuni , SP
Co-Authors: Amanda Sayuri Oizuni, Beatriz Cortez Rodriguez dos Santos, Gustavo Saturnino, Cibele Silva, Fernando Kurokawa
Presenter: Beatriz Cortez Rodriguez dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1687

Numerical simulation of flow and pollutant dispersion in an urban intersection using k-ϵ turbulence model

Submission Author: Tomaz Antônio Lisboa e Silva , SP
Co-Authors: Tomaz Antônio Lisboa e Silva, Fernanda Capucho Cezana
Presenter: Tomaz Antônio Lisboa e Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1476

Numerical study of the influence of the distance between the inlet boundary condition and the obstacle in external flow

Submission Author: Cleberson Matos , SP
Co-Authors: Cleberson Matos, José Emanuel da Silva Montiel, Valentina Ferro Antunes de Oliveira, Laís Corrêa, Fernando Kurokawa
Presenter: Cleberson Matos

doi://10.26678/ABCM.COBEM2023.COB2023-1458

NUMERICAL ANALYSIS OF THE EFFECTS OF CONVERGENT-DIVERGENT NOZZLE GEOMETRY ON THE CHARACTERISTICS OF SUPERSONIC JET IN BOF CONVERTERS

Submission Author: Pedro Francelino Garcia , ES
Co-Authors: Pedro Francelino Garcia, Renato Siqueira, Ayrton Cavallini Zotelle, João Paulo Barbosa
Presenter: Renato Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-1006

EFFECTS OF THICKNESS CHANGES ON THE THICKNESS ATTENUATORS FLOWS ASSOCIATED IN SERIES IN PULSED FLOWS

Submission Author: Gustavo Cordeiro Barreiros , ES
Co-Authors: Gustavo Cordeiro Barreiros, Matheus Campos Vieira, Pedro Bis, João Paulo Barbosa, Renato Siqueira, Ayrton Cavallini Zotelle
Presenter: Gustavo Cordeiro Barreiros

doi://10.26678/ABCM.COBEM2023.COB2023-1255

Evaluation of shear-thinning and shear-thickening fluids applied for enhanced oil recovery in heterogeneous porous medium

Submission Author: Ayrton Cavallini Zotelle , ES
Co-Authors: Ayrton Cavallini Zotelle, Renato Siqueira, Edson Soares
Presenter: Edson Soares

doi://10.26678/ABCM.COBEM2023.COB2023-0719

AERODYNAMIC ANALYSIS OF A FSAE VEHICLE OF THE UFVOLTS MAJORADOS TEAM THROUGH CHANGES IN END PLATES DESIGN

Submission Author: Joseph Kalil Khoury Junior , MG
Co-Authors: Ainara Paula, Joseph Kalil Khoury Junior, Geice Paula Villibor
Presenter: Joseph Kalil Khoury Junior

doi://10.26678/ABCM.COBEM2023.COB2023-1668

Turbulent Viscosity Model Assessment for the 1D Numerical Simulations of Vertical Annular Flows

Submission Author: Rodrigo Luís Formosinho Castello Branco , RJ
Co-Authors: Markus Ballhausen, Rodrigo Luís Formosinho Castello Branco, Joao Carneiro, Angela Nieckele
Presenter: Angela Nieckele

doi://10.26678/ABCM.COBEM2023.COB2023-1589

CFD ANALYSIS OF AN ULTRASONIC FLOWMETER UNDER DIFFERENT FLOW CONDITIONS

Submission Author: Augusto Luiz Cheffer de Melo , RJ
Co-Authors: Augusto Luiz Cheffer de Melo, Douglas de Almeida Garcia, fabio ouverney costa, Luiz Octavio Vieira Pereira, Bruno Almeida, Philippe Rollemberg d'Egmont
Presenter: Augusto Luiz Cheffer de Melo

doi://10.26678/ABCM.COBEM2023.COB2023-0515

NUMERICAL MODELLING AND SIMULATION OF MEMBRANES FOR SEPARATING GASES IN SUPERCRITICAL STATE

Submission Author: Flávio Silva Ferro , SP
Co-Authors: Flávio Silva Ferro, Bruno Carmo
Presenter: Flávio Silva Ferro

doi://10.26678/ABCM.COBEM2023.COB2023-1214

Three dimensional Finite Element Two-Phase Flow Simulation using a front tracking method

Submission Author: Daniel Barbedo Vasconcelos Santos , RJ
Co-Authors: Daniel Barbedo Vasconcelos Santos, Gustavo Rabello dos Anjos
Presenter: Daniel Barbedo Vasconcelos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0192

The study of the development of aircraft wakes near a ground plane through a Lagrangian approach

Submission Author: Marília Vidille , SP
Co-Authors: Marília Vidille, Paulo Guimarães de Moraes, Luiz Antonio Alcântara Pereira, Alex Bimbato
Presenter: Marília Vidille

doi://10.26678/ABCM.COBEM2023.COB2023-0067

LARGE EDDY SIMULATION OF THE ATMOSPHERIC FLOW AROUND WIND TURBINES WITH THE USE OF AN IMMERSED BOUNDARY METHOD

Submission Author: Leandro Jose Lemes Stival , PR
Co-Authors: Leandro Jose Lemes Stival, João Marcelo Vedovotto, Fernando Oliveira de Andrade, Aldemir Ap Cavalini Jr
Presenter: Leandro Jose Lemes Stival

doi://10.26678/ABCM.COBEM2023.COB2023-0083

CONTRIBUTIONS TO THE NUMERICAL SIMULATION OF FLOWS IN 180° CURVES AND PORTABLE WIND TUNNELS

Submission Author: Matheus de Araujo Siqueira , ES
Co-Authors: Matheus de Araujo Siqueira, Bruno Furieri, jane meri Santos, Philipe Uhlig Siqueira
Presenter: Matheus de Araujo Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-2400

Analysis and validation of wave absorption strategies for CFD simulation using OpenFOAM

Submission Author: Samuel Gonçalves , SC
Co-Authors: Samuel Gonçalves, Ernane Silva, Pedro Cardozo de Mello, Thiago Pontin Tancredi, Filipe Dutra da Silva, André Fujarra
Presenter: Samuel Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1169

Investigation of the influence of a highly permeable layer on the transverse permeability determination of RTM fibrous reinforcements

Submission Author: Gustavo Pereira , RS
Co-Authors: Gustavo Pereira, Douglas Cardoso, Cristiano Oliveira, jeferson Avila Souza
Presenter: jeferson Avila Souza

doi://10.26678/ABCM.COBEM2023.COB2023-1323

Investigation on the Impact of Sand Control Screen Diameter on Scaling and Flow Behavior in Oil Production

Submission Author: Rodrigo Prando Pedroni , PR
Co-Authors: Rodrigo Prando Pedroni, Ayrton Cavallini Zotelle, Renato Siqueira
Presenter: Rodrigo Prando Pedroni

doi://10.26678/ABCM.COBEM2023.COB2023-1001

A COMPARISON BETWEEN SIMILARITY SOLUTION AND EXPERIMENTAL DATA OF INCOMPRESSIBLE PLANAR MIXING LAYER

Submission Author: Mateus Alves Ferreira , RJ
Co-Authors: Mateus Alves Ferreira , Juan Carlos Assis da Silva, César Cunnha Pacheco, Leonardo Santos de Brito Alves
Presenter: Mateus Alves Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-1008

Analysis of aerodynamic drag in a Squareback geometry by numerical simulation

Submission Author: Elisa Paola Mora Robles , SC
Co-Authors: Elisa Paola Mora Robles, Leonel R Cancino, Carlos Javier Noriega Sanchez, Jorge Chavez
Presenter: Elisa Paola Mora Robles

doi://10.26678/ABCM.COBEM2023.COB2023-0493

INVESTIGATION OF SWIRLING FLOW EFFECT ON AN AXIAL COMPRESSOR PARAMETERS VIA CFD

Submission Author: Patrick Donegá Queiroz , SP
Co-Authors: Patrick Donegá Queiroz, Andre Damiani Rocha, Andre Mitsuo Kogishi, Joao Lucas Dozzi Dantas
Presenter: Patrick Donegá Queiroz

doi://10.26678/ABCM.COBEM2023.COB2023-1233

Coherent structures in the atmospheric boundary layer using resolvent analysis

Submission Author: Matheus Tozo de Araujo , PR
Co-Authors: Matheus Tozo de Araujo, Livia S. Freire, Leandro Franco de Souza, André Cavalieri
Presenter: Matheus Tozo de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-0357

Spectral Entropy of Turbulence in a Fluid Model of Fusion Plasmas During a Low-To-High Confinement Transition

Submission Author: Sarah Gomes da Silva Paes da Costa , DF
Co-Authors: Rodrigo Cerda, Ana Luiza Piragibe Freire
Presenter: Sarah Gomes da Silva Paes da Costa

doi://10.26678/ABCM.COBEM2023.COB2023-2435

COMBINED ANALYTICAL AND NUMERICAL STUDY OF LAMINAR MAGNETOHYDRODYNAMICS IN A BACKWARD-FACING STEP CHANNEL

Submission Author: Gustavo Assad , PB
Co-Authors: Gustavo Assad, Joao Alves de Lima, Carlos Antonio Cabral Santos, Dhiego Veloso, Fábio Lima, Igor Silveira, Allan Giuseppe
Presenter: Gustavo Assad

doi://10.26678/ABCM.COBEM2023.COB2023-0468

A COMPARISON BETWEEN POROUS AND FREE-FLOW MEDIA USING THE FINITE ELEMENT METHOD TO SOLVE THE GENERALIZED DARCY/FORCHHEIMER EQUATION

Submission Author: João Paulo Innocente de Souza , RJ
Co-Authors: João Paulo Innocente de Souza, Gustavo Rabello dos Anjos
Presenter: João Paulo Innocente de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-1061

Pore-scale flow prediction using physics informed neural networks

Submission Author: Pedro Calderano , MG
Co-Authors: Pedro Calderano, Marcio CARVALHO, Helon Vicente Hultmann Ayala
Presenter: Pedro Calderano

doi://10.26678/ABCM.COBEM2023.COB2023-1690

FLUID DYNAMIC SIMULATIONS OF MACH AND REGULAR REFLECTIONS IN OBLIQUE SHOCK-WAVE CONFIGURATIONS USING ADAPTIVE MESH REFINEMENT

Submission Author: René Sebastian Valencia Ramírez , Lima
Co-Authors: René Sebastian Valencia Ramírez, Cesar Celis, Andrés Armando Mendiburu Zevallos, Luis Bravo, Prashant Khare
Presenter: René Sebastian Valencia Ramírez

doi://10.26678/ABCM.COBEM2023.COB2023-0803

ASSESMENT OF LARGE EDDY SIMULATION (LES) SUB-GRID SCALE MODELS ACCOUNTING FOR COMPRESSIBLE HOMOGENEOUS ISOTROPIC TURBULENCE

Submission Author: Jhon Cordova , Peru
Co-Authors: Jhon Cordova, Cesar Celis, Andrés Armando Mendiburu Zevallos, Luis Bravo, Prashant Khare
Presenter: Jhon Cordova

doi://10.26678/ABCM.COBEM2023.COB2023-0802

Effect Of Moving Vehicles On The Flow And Dispersion Of Carbon Monoxide In An Urban Canyon

Submission Author: Gabriel Gusmão Almeida , ES
Co-Authors: Gabriel Gusmão Almeida, Fernanda Capucho Cezana
Presenter: Gabriel Gusmão Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-0122

DESIGN OPTIMIZATION OF SOURCES IN FLUID FLOW SYSTEMS USING COMPUTATIONAL FLUID DYNAMICS-BASED ADJOINT METHOD

Submission Author: Javier Aliaga Rivera , RJ
Co-Authors: Javier Aliaga Rivera, Marcos Sebastião de Paula Gomes
Presenter: Javier Aliaga Rivera

doi://10.26678/ABCM.COBEM2023.COB2023-2194

Actuator line method for diffuser-augmented turbines

Submission Author: Matheus Nunes , DF
Co-Authors: Matheus Nunes, Ramiro Bertolina, Antonio Brasil Junior, Taygoara Oliveira
Presenter: Matheus Nunes

doi://10.26678/ABCM.COBEM2023.COB2023-0530

Pitch angle impact on the aerodynamic performance of a straight-blade H-Darrieus turbine

Submission Author: Ramiro Bertolina , DF
Co-Authors: Ramiro Bertolina, Matheus Nunes, Antonio Brasil Junior, Taygoara Oliveira
Presenter: Ramiro Bertolina

doi://10.26678/ABCM.COBEM2023.COB2023-0531

A Comparative study of neutral atmospheric boundary layer flow and dispersion using non-standard RANS models in OpenFoam and Ansys Fluent

Submission Author: Juan Pablo de Lima Costa Salazar , SC
Co-Authors: Juan Pablo de Lima Costa Salazar, Roseane Albani
Presenter: Juan Pablo de Lima Costa Salazar

doi://10.26678/ABCM.COBEM2023.COB2023-0976

NUMERICAL ANALYSIS FOR THE DEVELOPMENT OF HIGH-LIFT LOW REYNOLDS NUMBER AIRFOILS USING INVERSE DESIGN GEOMETRIC MODIFICATIONS

Submission Author: João Victor Lopes Marchiori , PR
Co-Authors: João Victor Lopes Marchiori, Ayrton Cavallini Zotelle, Renato Siqueira
Presenter: João Victor Lopes Marchiori

doi://10.26678/ABCM.COBEM2023.COB2023-0966

Application of the IMERSPEC methodology for simulation of two-dimensional flows over vertical axis turbines

Submission Author: Lucas Monteiro , GO
Co-Authors: Lucas Monteiro, Felipe Pamplona Mariano
Presenter: Lucas Monteiro

doi://10.26678/ABCM.COBEM2023.COB2023-2260

CFD simulations for obtaining steady-state hydrodynamic parameters of a five-degree-of-freedom ROV with jet propulsion

Submission Author: Arthur Sena Marques , SC
Co-Authors: Arthur Sena Marques, Hélio Valdevieso Catarin, Lucas Weihmann, Andrea Piga Carboni
Presenter: Arthur Sena Marques

doi://10.26678/ABCM.COBEM2023.COB2023-0940

Numerical simulation of compressible and incompressible Newtonian flows using a total Lagrangian position-based finite element formulation

Submission Author: Péricles Rafael Pavão Carvalho , MA
Co-Authors: Péricles Rafael Pavão Carvalho, Giovane Avancini, Rodolfo Sanches
Presenter: Péricles Rafael Pavão Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-2196

AERODYNAMIC ANALYSIS OF TRUCK ACCESSORIES USING COMPUTATIONAL FLUID DYNAMICS

Submission Author: Diego Alves de Miranda , SC
Co-Authors: Leonardo Schultz, Diego Alves de Miranda
Presenter: Diego Alves de Miranda

doi://10.26678/ABCM.COBEM2023.COB2023-0077

Analysis of the cavitation effect on the performance of a plain journal bearing using Computational Fluid Dynamics

Submission Author: Fernanda Ferreira Rossi , MG
Co-Authors: Fernanda Ferreira Rossi, Aldemir Ap Cavalini Jr, João Marcelo Vedovotto, Franco Barbi, Leonardo Cabral
Presenter: Fernanda Ferreira Rossi

doi://10.26678/ABCM.COBEM2023.COB2023-0734

Strategies to evaluate the results of a CFD-based solution to investigate the aeroelastic dynamics of a typical section airfoil

Submission Author: Bianca Taís Visoná Carnielo , SP
Co-Authors: Bianca Taís Visoná Carnielo, ALUISIO PANTALEAO, Douglas Bueno
Presenter: Bianca Taís Visoná Carnielo

doi://10.26678/ABCM.COBEM2023.COB2023-0865

NUMERICAL INVESTIGATION FOR SUPERSONIC GAS SEPARATOR WITH CURVED NOZZLE

Submission Author: Denis Fernando Gregório Júnior , SP
Co-Authors: Denis Fernando Gregório Júnior, Reinaldo Marcondes Orselli, Ricardo Galdino da SIlva, Bruno Souza
Presenter: Denis Fernando Gregório Júnior

doi://10.26678/ABCM.COBEM2023.COB2023-0879

Numerical study of slot coating flows with a viscous liquid-gas interface

Submission Author: Filipe Oliveira da Silva , RJ
Co-Authors: Filipe Oliveira da Silva, Ivan Siqueira, Marcio CARVALHO, Roney Thompson
Presenter: Filipe Oliveira da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2027

Numerical simulation of exhaustion and ventilation systems in an underground subway station in Brazil

Submission Author: Beatriz Cortez Rodriguez dos Santos , SP
Co-Authors: Beatriz Cortez Rodriguez dos Santos, Amanda Sayuri Oizuni, Gustavo Saturnino, Cibele Silva, Fernando Kurokawa
Presenter: Beatriz Cortez Rodriguez dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1985

Effect of helical geometry on flow/pressure fluctuation attenuator device for pulsed flows

Submission Author: Matheus Campos Vieira , ES
Co-Authors: Matheus Campos Vieira, Gustavo Cordeiro Barreiros, Pedro Bis, João Paulo Barbosa, Ayrton Cavallini Zotelle, Renato Siqueira
Presenter: Matheus Campos Vieira

doi://10.26678/ABCM.COBEM2023.COB2023-1111

LAGRANGIAN COHERENT STRUCTURES IN NUMERICAL SIMULATIONS OF A FLUID MODEL OF TURBULENCE IN FUSION PLASMAS

Submission Author: Ana Luiza Piragibe Freire , DF
Co-Authors: Rodrigo Cerda, Sarah Gomes da Silva Paes da Costa
Presenter: Ana Luiza Piragibe Freire

doi://10.26678/ABCM.COBEM2023.COB2023-2436

Numerical Simulation of Water Hammer

Submission Author: José Gustavo Coelho , MG
Co-Authors: José Gustavo Coelho, André Luiz Amarante Mesquita
Presenter: José Gustavo Coelho

doi://10.26678/ABCM.COBEM2023.COB2023-0987

A NUMERICAL STUDY ON 2D SPATIAL MIXING LAYERS USING SPECTRAL/HP METHODS: INSIGHTS ON HOW MESH REFINEMENT AFFECTS FLOW STATISTICS

Submission Author: Daniel Garcia-Ribeiro , SP
Co-Authors: Daniel Garcia-Ribeiro, Vinicius Malatesta, Rodrigo Costa Moura
Presenter: Daniel Garcia-Ribeiro

doi://10.26678/ABCM.COBEM2023.COB2023-0611

Investigation of the influence of ground roughness on airflow in the atmospheric boundary layer using OpenFOAM

Submission Author: Gilberto Augusto Amado Moreira , PB
Co-Authors: Gilberto Augusto Amado Moreira, Arthur Guilherme, Patrícia Santos, Fabiano Cordeiro Cavalcanti
Presenter: Gilberto Augusto Amado Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-0151

BIO-INSPIRED SMALL WIND TURBINES USING FLYING SEEDS GEOMETRY

Submission Author: Bruno Alcantara , DF
Co-Authors: Bruno Alcantara, Ramiro Bertolina, Antonio Brasil Junior
Presenter: Ramiro Bertolina

doi://10.26678/ABCM.COBEM2023.COB2023-2359

Development, implementation and verification of an MHD compressible solver in OpenFOAM

Submission Author: Juan Pablo de Lima Costa Salazar , SC
Co-Authors: Gabriel Fernandes Marconcini Roberto, Juan Pablo de Lima Costa Salazar
Presenter: Juan Pablo de Lima Costa Salazar

doi://10.26678/ABCM.COBEM2023.COB2023-0055

Initial Study on Waterjet Propulsion for Naval Vessels: Obtaining Parameters through CFD Simulations

Submission Author: Hélio Valdevieso Catarin , SC
Co-Authors: Hélio Valdevieso Catarin, Arthur Sena Marques, Lucas Weihmann, Andrea Piga Carboni
Presenter: Hélio Valdevieso Catarin

doi://10.26678/ABCM.COBEM2023.COB2023-0951

MACHINE LEARNING-BASED REDUCED-ORDER MODELS FOR BURGERS AND SHALLOW-WATER EQUATIONS

Submission Author: Pedro Roberto Barbosa Rocha , RJ
Co-Authors: Pedro Roberto Barbosa Rocha, Marcos Sebastião de Paula Gomes
Presenter: Pedro Roberto Barbosa Rocha

doi://10.26678/ABCM.COBEM2023.COB2023-1592

A COMPARATIVE NUMERICAL ANALYSIS BETWEEN STANDARDS FOR VENTURIMETER DESIGN APPLIED TO THE OPTIMIZATION OF FORMULA SAE RESTRICTOR

Submission Author: Juan Carlos Assis da Silva , RJ
Co-Authors: Juan Denner, Juan Carlos Assis da Silva, Rômulo Bessi Freitas, Vinícius Ribeiro dos Santos de de Sá Brito, Paulo Farias
Presenter: Juan Carlos Assis da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0666

Analysis of the effect of perturbations imposed on the supersonic flow over a cylinder through direct numerical simulations

Submission Author: Allan Rodrigo Souza , RJ
Co-Authors: Allan Rodrigo Souza, Leonardo Santos de Brito Alves, Juan Carlos Assis da Silva, Rômulo Bessi Freitas
Presenter: Allan Rodrigo Souza

doi://10.26678/ABCM.COBEM2023.COB2023-1076

Numerical Investigation of the Aerodynamics and Aeroacoustics Effects of a Zigzag Tripping on an Aeronautical Propeller

Submission Author: Mateus Grassano Lattari , SC
Co-Authors: Gabriel Caldeira Vicente, Mateus Grassano Lattari, Cesar Deschamps, Julio Cordioli
Presenter: Gabriel Caldeira Vicente

doi://10.26678/ABCM.COBEM2023.COB2023-2357

Fluid-structural numerical evaluation of the efficiency of a flow atenuator device through variations in the modulus of elasticity

Submission Author: Pedro Bis , ES
Co-Authors: Pedro Bis, Matheus Campos Vieira, Gustavo Cordeiro Barreiros, João Paulo Barbosa, Renato Siqueira, Ayrton Cavallini Zotelle
Presenter: Gustavo Cordeiro Barreiros

doi://10.26678/ABCM.COBEM2023.COB2023-1436

Flows over immersed bodies using the Fourier pseudospectral method

Submission Author: Laura Albuquerque , PE
Co-Authors: Laura Albuquerque, Mariana Villela
Presenter: Laura Albuquerque

doi://10.26678/ABCM.COBEM2023.COB2023-0066

MESH GENERATION METHODOLOGY FOR NUMERICAL SIMULATION OF FLOW WITHIN MULTILOBE PROGRESSING CAVITY PUMPS

Submission Author: TULIO RAFAEL PORTO , PB
Co-Authors: TULIO RAFAEL PORTO, Joao Alves de Lima, Tony Herbert Freire de Andrade, Tales Dmitri Araujo Lopes
Presenter: Joao Alves de Lima

doi://10.26678/ABCM.COBEM2023.COB2023-2056

On use of Large-Eddy Simulation and OpenFOAM for wind flow around bridge deck problems

Submission Author: José Emanuel da Silva Montiel , SP
Co-Authors: José Emanuel da Silva Montiel, Breno Tavares de Godoy, Amanda Sayuri Oizuni, Valentina Ferro Antunes de Oliveira, Cleberson Matos, Laís Corrêa, Fernando Kurokawa
Presenter: Cleberson Matos

doi://10.26678/ABCM.COBEM2023.COB2023-1420

Study of axial separators through the computational fluid dynamics technique

Submission Author: Felipe Bendinelli Murça , ES
Co-Authors: Felipe Bendinelli Murça, Fabio de Assis Ressel Pereira, Michel de Oliveira dos Santos, Bruno Loureiro
Presenter: Michel de Oliveira dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1796

AERODYNAMIC PERFORMANCE OF SG6043 PROFILE MODIFIED WITH BIOMIMETIC FOR SMALL WIND TURBINES APPLICATION

Submission Author: Luana Schneider , RS
Co-Authors: Luana Schneider, Giuliano Demarco, Carlos Eduardo de Souza
Presenter: Luana Schneider

doi://10.26678/ABCM.COBEM2023.COB2023-0506

INFLUENCE OF CARREAU-YASUDA MODEL PARAMETERS ON NAJAFI-GOLESTANIAN MICROSWIMMER SWIMMING IN GENERALIZED NEWTONIAN FLUID

Submission Author: Gustavo Alves Lima , ES
Co-Authors: Gustavo Alves Lima, Roberto Ausas , Jose Alberto Cuminato, Gustavo Buscaglia, Stevens Paz Sánchez
Presenter: Gustavo Alves Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1758

SEPARATION EFFICENCY ANALYSIS OF A SUPERSONIC SEPARATOR NOZZLE WITH CENTRAL BODY

Submission Author: Thomaz Faccioli , SP
Co-Authors: Thomaz Faccioli, Reinaldo Marcondes Orselli, Ricardo Galdino da SIlva, Denis Fernando Gregório Júnior, Bruno Carmo
Presenter: Thomaz Faccioli

doi://10.26678/ABCM.COBEM2023.COB2023-0975

Computational Experiments and Testing of a New Distributed Memory Unstructured CFD Solver Developed with Chapel

Submission Author: Fábio Malacco Moreira , SP
Co-Authors: Fábio Malacco Moreira, João Luiz F. Azevedo
Presenter: Fábio Malacco Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-2001

Validation of a simulation model to predict the drag on cylinders in different tandem arrangements

Submission Author: Pedro Dallabrida , SC
Co-Authors: Pedro Dallabrida, Filipe Dutra da Silva
Presenter: Filipe Dutra da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1538

Design and performance analysis of a Francis type hydraulic turbine impeller employing CFD

Submission Author: Mateus Felipe Benicio Moraes , MA
Co-Authors: Mateus Felipe Benicio Moraes, Dener Silva de Almeida
Presenter: Mateus Felipe Benicio Moraes

doi://10.26678/ABCM.COBEM2023.COB2023-1508

Flow Induced Vibration 7

Numerical analysis of crossflow over one and two rows of cylinders

Submission Author: Roberta Fatima Neumeister , DF
Co-Authors: Roberta Fatima Neumeister, Christoph Reichel, Adriane Prisco Petry, Sergio Viçosa Möller
Presenter: Sergio Viçosa Möller

doi://10.26678/ABCM.COBEM2023.COB2023-0404

Transformer-based models for predictive simulations of vortex-induced vibrations

Submission Author: Gabriel Mario Guerra Bernadá , RJ
Co-Authors: Jacques Honigbaum, Fernando Rochinha, Rodolfo S. M. Freitas, Souleymane Zio, Gabriel Mario Guerra Bernadá
Presenter: Jacques Honigbaum

doi://10.26678/ABCM.COBEM2023.COB2023-1881

Fluid-structure interaction with Finite Element - Immersed Boundary Apporach with Industrial Application

Submission Author: Freddy Portillo Morales , SP
Co-Authors: Freddy Portillo Morales, Aristeu Silveira Neto, Aldemir Ap Cavalini Jr, Leandro Jose Lemes Stival
Presenter: Freddy Portillo Morales

doi://10.26678/ABCM.COBEM2023.COB2023-0644

Vortex-Induced Motion of a Multicolumn Floating Offshore Wind Turbine Platform: a study comparing two modelling approaches - CFD and a Reduced Order Model

Submission Author: Éverton Lins de Oliveira , SP
Co-Authors: André Scopel, Éverton Lins de Oliveira, Bruno Carmo, CELSO Pupo Pesce
Presenter: CELSO Pupo Pesce

doi://10.26678/ABCM.COBEM2023.COB2023-1968

Investigating the Parameters of a Spar Model Platform Through Still Water Decay Tests Using Low-Cost IMU Readings

Submission Author: Aline Leal de Lima Gontarski , PR
Co-Authors: Aline Leal de Lima Gontarski, André Fujarra
Presenter: Aline Leal de Lima Gontarski

doi://10.26678/ABCM.COBEM2023.COB2023-1089

Development of a numerical methodology for investigating the phenomenon of vortex induced vibration in bladeless wind turbine

Submission Author: Murilo Rodrigues , PA
Co-Authors: Murilo Rodrigues, João Lucas Lobato Soares, Alexandre Mesquita
Presenter: João Lucas Lobato Soares

doi://10.26678/ABCM.COBEM2023.COB2023-2194

WAKE INTERACTION BETWEEN TWO CIRCULAR SLENDER CYLINDERS TANDEM PLACED WITH SMALL SPACING RATIOS

Submission Author: Patrick Habowski , RS
Co-Authors: Patrick Habowski, Adriane Prisco Petry, Sergio Viçosa Möller
Presenter: Sergio Viçosa Möller

doi://10.26678/ABCM.COBEM2023.COB2023-1287

Industrial Applications and Turbomachinery 6

Combined Screening Sensitivity Analysis Applied to One-dimensional Model of a High-Performance S-CO2 Centrifugal Compressor

Submission Author: Fernando Henrique Tiezzi Vergara , SP
Co-Authors: Fernando Henrique Tiezzi Vergara , Elóy Esteves Gasparin, Jurandir Itizo Yanagihara, Leandro Salviano
Presenter: Fernando Henrique Tiezzi Vergara

doi://10.26678/ABCM.COBEM2023.COB2023-0646

The influence of vaneless annular passage in the performance of a centrifugal compressor with vaned diffuser

Submission Author: Rafael Eller , SP
Co-Authors: Rafael Eller, Elóy Esteves Gasparin, Jurandir Itizo Yanagihara, Leandro Salviano
Presenter: Rafael Eller

doi://10.26678/ABCM.COBEM2023.COB2023-0642

ESP Performance Analysis Operating with Stable Water-in-Oil Emulsions

Submission Author: Andrey Felipe Casas Pulido , SP
Co-Authors: Andrey Felipe Casas Pulido, Natan Augusto Vieira Bulgarelli, William Monte Verde, Roberto Fernando Leuchtenberger, Marcelo Souza de Castro
Presenter: Andrey Felipe Casas Pulido

doi://10.26678/ABCM.COBEM2023.COB2023-0254

Numerical and experimental study of a pulsation damper: application of a hyperelastic model for uniaxial tension

Submission Author: Matheus Alves Lima , Buscando endereço...
Co-Authors: Matheus Alves Lima, Bruno Loureiro, Daniel Ribeiro, João Paulo Barbosa, Michel de Oliveira dos Santos, Pedro Vitor Morbach Dixini, Renato Siqueira
Presenter: Matheus Alves Lima

doi://10.26678/ABCM.COBEM2023.COB2023-2171

TEMPORAL EVOLUTION OF SUSPENTION POTENTIAL AROUND SUCCESSIVE STOCKPILES USING THE OIL-FILM TECHNIQUE

Submission Author: Cristina Lima de Morais , ES
Co-Authors: Bruno Furieri, jane meri Santos, Jean-Luc Harion
Presenter: Cristina Lima de Morais

doi://10.26678/ABCM.COBEM2023.COB2023-2397

ANALYSIS OF EMISSIONS OF ODORANT COMPOUNDS WITH CHANGES TO THE INTERNAL SETUP OF THE USEPA DYNAMIC FLUX CHAMBER

Submission Author: Laize Nalli de Freitas , ES
Co-Authors: Kamila Furtado Cupertino, jane meri Santos, Bruno Furieri, Philipe Uhlig Siqueira
Presenter: Philipe Uhlig Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-2398

Instrumentation and Experiments 14

The VisualEFM.jl package for wind tunnel studies of pedestrian level wind using sand erosion technique

Submission Author: Gabriel Borelli Martins , SP
Co-Authors: Gabriel Borelli Martins, Felipe Augusto Frazão Kleine
Presenter: Gabriel Borelli Martins

doi://10.26678/ABCM.COBEM2023.COB2023-1545

Design and Calibration of a Pitot Static Probe for an Educational Subsonic Wind Tunnel

Submission Author: Gustavo Pereira Miglioli , PR
Co-Authors: Gustavo Pereira Miglioli, William Alexander Carrillo Ibanez
Presenter: Gustavo Pereira Miglioli

doi://10.26678/ABCM.COBEM2023.COB2023-1640

Performance of a tube bundle flow straightener on velocity profile asymmetry reduction in a wind tunnel facility

Submission Author: Matheus Damacena , ES
Co-Authors: Matheus Damacena, Ligia Franco, Rogerio Ramos, Renato Siqueira
Presenter: Matheus Damacena

doi://10.26678/ABCM.COBEM2023.COB2023-0765

ESTIMATION OF THE DISSIPATION RATE IN A CENTRIFUGAL PUMP IMPELLER BY USING PIV

Submission Author: William Denner Pires Fonseca , SP
Co-Authors: William Denner Pires Fonseca, Rodolfo Perissinotto, Rafael Franklin Lazaro de Cerqueira, William Monte Verde, Marcelo Souza de Castro, Erick de Moraes Franklin
Presenter: William Denner Pires Fonseca

doi://10.26678/ABCM.COBEM2023.COB2023-0186

ANALYSIS OF THE FREE END FLOW ON THE BISTABILITY PHENOMENON AFTER TWO SIDE BY SIDE FINITE CYLINDER WITH MID ASPECT RATIO

Submission Author: Marcos Woyciekoski , RS
Co-Authors: Marcos Woyciekoski, Jeferson Diehl de Oliveira, Roberta Fatima Neumeister, Sergio Viçosa Möller
Presenter: Jeferson Diehl de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0916

CONVECTIVE PATTERNS IN HELE-SHAW FLOWS DRIVEN BY DENSITY GRADIENTS AND CHEMICAL COMPOSITION CHANGES

Submission Author: Bernardo Alberto Marcussi , RJ
Co-Authors: Bernardo Alberto Marcussi, André Celestino Martins, Rachel Manhães de Lucena, Norberto Mangiavacchi
Presenter: Bernardo Alberto Marcussi

doi://10.26678/ABCM.COBEM2023.COB2023-1519

Verification bench based on a centrifugal fan with variable speed for gas flow meters

Submission Author: Luciano Amaury dos Santos , SC
Co-Authors: Luciano Amaury dos Santos
Presenter: Luciano Amaury dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0727

Particle tracking velocimetry (PTV) measurement technique for a experimental investigation of a surrounding air behaviour in ethanol spray development

Submission Author: Antonio Pacifico , SP
Co-Authors: Victor Ganino, Rafael Hauckewitz Todaro, Rafael da Cruz Ribeiro Berti, GUENTHER Krieger Filho, Antonio Pacifico
Presenter: GUENTHER Krieger Filho

doi://10.26678/ABCM.COBEM2023.COB2023-0537

FLOW RATE MEASUREMENT OF TWO-PHASE FLOW IN DIFFERENT PATTERNS WITH A SINGLE THROTTLE DEVICE USING PgNN

Submission Author: Tiago Francisconi Borges Camargo , SC
Co-Authors: Tiago Francisconi Borges Camargo, Emilio Paladino
Presenter: Tiago Francisconi Borges Camargo

doi://10.26678/ABCM.COBEM2023.COB2023-1657

INVESTIGATING INTERNAL FLOW AND THE INFLUENCE OF INTERNAL MIXERS ON THE USEPA DYNAMIC FLUX CHAMBER FOR ODORANT COMPOUND EMISSIONS

Submission Author: Kamila Furtado Cupertino , ES
Co-Authors: Kamila Furtado Cupertino, Laize Nalli de Freitas, jane meri Santos, Bruno Furieri, Philipe Uhlig Siqueira
Presenter: Laize Nalli de Freitas

doi://10.26678/ABCM.COBEM2023.COB2023-2399

Flow over static smooth circular cylinder in wind tunnel

Submission Author: Douglas Neves Nascentes , GO
Co-Authors: Douglas Neves Nascentes, Marlipe Garcia Fagundes Neto, Felipe Pamplona Mariano
Presenter: Douglas Neves Nascentes

doi://10.26678/ABCM.COBEM2023.COB2023-0721

Development of a Marine Composite Propeller

Submission Author: Felipe Santos de Castro , SP
Co-Authors: Felipe Santos de Castro, Andre Mitsuo Kogishi, Joao Lucas Dozzi Dantas, HELIO CORREA DA SILVA JUNIOR
Presenter: Felipe Santos de Castro

doi://10.26678/ABCM.COBEM2023.COB2023-0277

Statistical features and transition dynamics of coherent organizational states in turbulent pipe flow at moderate Reynolds numbers

Submission Author: Robert Jäckel , RJ
Co-Authors: Robert Jäckel, Bruno Magacho, Bayode Owolabi, Luca Moriconi, Juliana Loureiro
Presenter: Robert Jäckel

doi://10.26678/ABCM.COBEM2023.COB2023-0590

Experimental analysis of friction torque loss in grease lubricated deep groove ball bearings

Submission Author: Atilio Silva , PR
Co-Authors: Atilio Silva, Diego Martins, Marcos Hiroshi Takahama, Cezar Otaviano Ribeiro Negrao, tiago cousseau
Presenter: Marcos Hiroshi Takahama

doi://10.26678/ABCM.COBEM2023.COB2023-1862

Multi-phase Flow 32

Machine Learning for barchan dune detection

Submission Author: Esteban Andres Cúñez Benalcazar , SP
Co-Authors: Esteban Andres Cúñez Benalcazar, Erick de Moraes Franklin
Presenter: Esteban Andres Cúñez Benalcazar

doi://10.26678/ABCM.COBEM2023.COB2023-0088

FLUIDIZATION CURVES AND ANALYSIS OF POWER SPECTRAL DENSITY OF POLYPROPYLENE PARTICLES

Submission Author: Eduardo Nóbrega , RS
Co-Authors: Eduardo Nóbrega, Marcelo Gotardo, Álisson Renan Stochero da Silva, Lucilla Coelho de Almeida, Joao Americo Aguirre Oliveira Jr, Flavia Zinani
Presenter: Marcelo Gotardo

doi://10.26678/ABCM.COBEM2023.COB2023-2252

Solução Numérica de Sistema Unidimensional Oleoduto-Riser em Catenária

Submission Author: Leonardo Alegretti Belaroza , SC
Co-Authors: Leonardo Alegretti Belaroza, karl peter burr
Presenter: Leonardo Alegretti Belaroza

doi://10.26678/ABCM.COBEM2023.COB2023-1217

COMPARISON BETWEEN EXPERIMENTAL PRESSURE DROP AND PREDICTIONS BY DIFFERENT SLUG UNIT CELL APPROACHES FOR HORIZONTAL AIR-SHEAR THINNING FLUID FLOW

Submission Author: Rafael Cordebela , RJ
Co-Authors: Rafael Cordebela, Bernardo Brener, Daiane Iceri, Charlie van der Geest, Roney Thompson, Marcelo Souza de Castro
Presenter: Rafael Cordebela

doi://10.26678/ABCM.COBEM2023.COB2023-1561

Analysis and development of a multiphase flow model for choke valves

Submission Author: Matheus Henrique Pestana de Carvalho , SP
Co-Authors: Matheus Henrique Pestana de Carvalho, Jorge Luis Baliño
Presenter: Matheus Henrique Pestana de Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-0140

Identification and Classification of Leaks in Dense-Gas/Liquid Pipe Flow through Pressure Signature Analysis

Submission Author: Carlos Mauricio Ruiz Diaz , SP
Co-Authors: Carlos Mauricio Ruiz Diaz, Johann Eduardo Castro Bolivar, Cristhian Alvarez Pacheco, Marcus da Silva Carr, Oscar Mauricio Hernandez Rodriguez
Presenter: Carlos Mauricio Ruiz Diaz

doi://10.26678/ABCM.COBEM2023.COB2023-0355

Destabilization of water-oil emulsion by drop interface deformation

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Talita Botti, Anthony Hutin, Marcio CARVALHO
Presenter: Talita Botti

doi://10.26678/ABCM.COBEM2023.COB2023-1759

EXPERIMENTAL INVESTIGATION OF HORIZONTAL TWO-PHASE SLUG FLOW WITH HIGH DENSITY GASES

Submission Author: Matheus Vitor Rocha Pereira , PR
Co-Authors: Bruna Patricia Naidek, Matheus Vitor Rocha Pereira, Isabela Simões Veiga, Eduardo Mateus Baggio, ROBERTO FONSECA JUNIOR, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Bruna Patricia Naidek

doi://10.26678/ABCM.COBEM2023.COB2023-0511

Pressure drop analysis in emulsions flow

Submission Author: Ligia Franco , ES
Co-Authors: Ligia Franco, Murilo Zucatelli Elias, Rayane Reinholz Boone Corona, Edimilson Kempin Junior, Juliana Thomes Alves Roberti, Rogerio Ramos, Renato Siqueira
Presenter: Ligia Franco

doi://10.26678/ABCM.COBEM2023.COB2023-0299

STUDY OF THE FLUID DYNAMIC BEHAVIOR OF THE DESALINATION PROCESS BY REVERSE OSMOSIS FOR DIFFERENT SPACER GEOMETRIES

Submission Author: GILSOMARO BARBOSA DE MELO SILVA Gil , RN
Co-Authors: GILSOMARO BARBOSA DE MELO SILVA Gil, Francisco Samuel Chaves, Diego Diniz, Jackson Simoes
Presenter: GILSOMARO BARBOSA DE MELO SILVA Gil

doi://10.26678/ABCM.COBEM2023.COB2023-2039

Controlling the relaxation and breakup of initially elongated ferrofluid droplets with rotating magnetic fields

Submission Author: Arthur Guilherme , PB
Co-Authors: Arthur Guilherme, Taygoara Oliveira
Presenter: Arthur Guilherme

doi://10.26678/ABCM.COBEM2023.COB2023-1993

EXPERIMENTAL STUDY OF THE TRANSIENT GAS-LIQUID FLOW THROUGH AN ORIFICE PLATE USING HIGH SPEED CAMERA AND DIFFERENTIAL PRESSURE MEASUREMENT

Submission Author: Emilio Paladino , SC
Co-Authors: Josiane Weise, Rafael Franklin Lazaro de Cerqueira, Emilio Paladino
Presenter: Emilio Paladino

doi://10.26678/ABCM.COBEM2023.COB2023-0654

Boundary integral simulations based on the vortex-sheet formalism for the discretization of sharp droplet interfaces in Hele-Shaw cells

Submission Author: Rafael Menezes de Oliveira , RJ
Co-Authors: Rafael Menezes de Oliveira
Presenter: Rafael Menezes de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0963

Water Model and Numerical Simulation of a Single Strand Slab Caster Tundish

Submission Author: Pedro Domingos , MG
Co-Authors: Pedro Domingos, Paulo Vinicius Trevizoli, Johne Jesus Mol Peixoto
Presenter: Pedro Domingos

doi://10.26678/ABCM.COBEM2023.COB2023-2117

A model to improve the control of the liquid injection velocity in a lazy-wave riser

Submission Author: Matheus Pasquini , SP
Co-Authors: Gabriela Pereira Toledo, Matheus Pasquini, Jéssica Gonçalves, Ricardo Augusto Mazza
Presenter: Gabriela Pereira Toledo

doi://10.26678/ABCM.COBEM2023.COB2023-0970

Chordal Measurement of Phase Fraction Distribution in Stratified Flow pattern in Dense-Gas/Liquid Pipe flow Via Gamma-Ray Densitometry.

Submission Author: Cristhian Alvarez Pacheco , SP
Co-Authors: Cristhian Alvarez Pacheco, Carlos Mauricio Ruiz Diaz, Luis Felipe Acuna Alegria, Oscar Mauricio Hernandez Rodriguez
Presenter: Cristhian Alvarez Pacheco

doi://10.26678/ABCM.COBEM2023.COB2023-0185

Identification of the flow pattern from the experimental pressure signal in horizontal pipes carrying two-phase flows

Submission Author: Daniely Amorim das Neves , DF
Co-Authors: Daniely Amorim das Neves, Saon Vieira, Juliana Cenzi, Aline Souza de Paula, Marcelo Souza de Castro, Adriano Todorovic Fabro
Presenter: Daniely Amorim das Neves

doi://10.26678/ABCM.COBEM2023.COB2023-2058

Influence of Hydrate-Like Particles in Air-Water Gas-Liquid Stratified Flow Pattern

Submission Author: Vitor Otávio Ochoski Machado , PR
Co-Authors: Vitor Otávio Ochoski Machado, João Pedro Péres Siqueira, Thiago Rian Bueno, Amadeu Sum, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Vitor Otávio Ochoski Machado

doi://10.26678/ABCM.COBEM2023.COB2023-1547

Hydrodynamic effects over the self assembly of diblock copolymer melts

Submission Author: Victor Carlos Teixeira , PA
Co-Authors: Victor Carlos Teixeira, Fernando Pereira Duda
Presenter: Victor Carlos Teixeira

doi://10.26678/ABCM.COBEM2023.COB2023-2354

Classification of flow patterns in air-water flows using confocal chromatic microscopy

Submission Author: Fernando Neves Quintino dos Santos , SP
Co-Authors: Fernando Neves Quintino dos Santos, Cristiano Tibiriçá
Presenter: Fernando Neves Quintino dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1475

Interfacial Oscillations in Bidisperse Beds

Submission Author: Vinícius Oliveira , SP
Co-Authors: Vinícius Oliveira, Danilo da Silva Borges, Erick de Moraes Franklin
Presenter: Vinícius Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0119

Experimental and Theoretical Characterization of Thermophysical Properties and Electrical Permittivity of CO2 and Dodecane Mixtures

Submission Author: Erich Takenore Tiuman , PR
Co-Authors: Erich Takenore Tiuman, Jean Paulo Nakatu Longo, Felipe Kneip Marozo, David Kabacznik , Eduardo Nunes dos Santos, Marco Jose Da Silva, Rigoberto Morales, Moisés Marcelino Neto
Presenter: Erich Takenore Tiuman

doi://10.26678/ABCM.COBEM2023.COB2023-0551

Numerical study on the diffusion characteristics of oil leakage from submarine buried pipelines

Submission Author: Zexin Xu , Beijing
Co-Authors: Zexin Xu, Su Jian, Chen An
Presenter: Zexin Xu

doi://10.26678/ABCM.COBEM2023.COB2023-2353

Particle segregation in bidisperse narrow beds fluidized at different inclinations

Submission Author: Henrique Barbosa de Oliveira , SP
Co-Authors: Henrique Barbosa de Oliveira, Erick de Moraes Franklin
Presenter: Henrique Barbosa de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0063

Numerical analysis of the liquid film thickness for gas-liquid flows on the separated pattern: closing parameters influence

Submission Author: Elen Louise Camargo Cominesi , PR
Co-Authors: Elen Louise Camargo Cominesi, Vinícius Valenga, Alysson Henrique Rublesperger de Almeida, Victor Vaurek Dimbarre, Luiz Eduardo Melo Lima
Presenter: Victor Vaurek Dimbarre

doi://10.26678/ABCM.COBEM2023.COB2023-0934

Onset of growth of Saffman-Taylor instabilities in a three-layer, rectangular Hele-Shaw flow

Submission Author: Rafael Menezes de Oliveira , RJ
Co-Authors: Pedro Anjos, Carlos Roberto Hollanda Lopes, Rafael Menezes de Oliveira
Presenter: Carlos Roberto Hollanda Lopes

doi://10.26678/ABCM.COBEM2023.COB2023-0902

The influence of pipe diameter on liquid film features in vertical downward annular flow

Submission Author: Ana Luiza Beltrão Santana , PR
Co-Authors: Ana Luiza Beltrão Santana, Eduardo Nunes dos Santos, Marco Jose Da Silva, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Ana Luiza Beltrão Santana

doi://10.26678/ABCM.COBEM2023.COB2023-1349

Study of the influence of the film height on near interface turbulent structure in gas-liquid stratified via DNS

Submission Author: Victor Wagner Freire de Azevedo , RN
Co-Authors: Victor Wagner Freire de Azevedo, Emilio Paladino, Fabian Denner
Presenter: Victor Wagner Freire de Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-1073

Numerical and experimental study of Flushing process in a horizontal pipe using miscible fluids

Submission Author: Elcilane Freitas , PR
Co-Authors: Elcilane Freitas, Murilo Henrique Almeida Santos, Rafaella Casado Silva, Marco Germano Conte, Pedro Leineker Ochoski Machado, Eduardo Nunes dos Santos, Jean Paulo Nakatu Longo, Henrique Stel, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Elcilane Freitas

doi://10.26678/ABCM.COBEM2023.COB2023-0528

Numerical Investigation of Droplet Deformation and Breakup in T-Junction Microfluidics

Submission Author: Juan Linhares Barbosa , DF
Co-Authors: Juan Linhares Barbosa, Paulo Henrique Neves Pimenta, Taygoara Oliveira
Presenter: Juan Linhares Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-0690

A SLUG FLOW MODEL WITH CONCAVE INTERFACE FOR GAS-LIQUID FLOW IN HORIZONTAL PIPES

Submission Author: Michael Anthony Mendes , RJ
Co-Authors: Michael Anthony Mendes, Gabriel Caetano Gomes Ribeiro da Silva, Su Jian
Presenter: Michael Anthony Mendes

doi://10.26678/ABCM.COBEM2023.COB2023-1108

A comparison of droplet breakage in W/O emulsion flow induced by pumping and gas pressurization

Submission Author: Murilo Zucatelli Elias , ES
Co-Authors: Murilo Zucatelli Elias, Ligia Franco, Rayane Reinholz Boone Corona, Edimilson Kempin Junior, Juliana Thomes Alves Roberti, Rogerio Ramos
Presenter: Murilo Zucatelli Elias

doi://10.26678/ABCM.COBEM2023.COB2023-0293

Rheology and Non-Newtonian Fluid Mechanics 15

Verification of a Viscoelastic LPTT Fluid Flow Code by the Method of Manufactured Solutions

Submission Author: Andreza Beatriz , SP
Co-Authors: Welton Costa Lavércio, Andreza Beatriz, Juniormar Organista, Leandro Franco de Souza
Presenter: Andreza Beatriz

doi://10.26678/ABCM.COBEM2023.COB2023-0737

Rheological Characterization of Non-colloidal Suspensions with Non-Newtonian Bulk: Investigating the Impact of Microparticles

Submission Author: LUIS HUMBERTO QUITIAN ARDILA , PR
Co-Authors: LUIS HUMBERTO QUITIAN ARDILA, Emiliano Bocardo da Cruz, Yamid José García Blanco, Diogo Elias da Vinha Andrade, Admilson Franco
Presenter: Emiliano Bocardo da Cruz

doi://10.26678/ABCM.COBEM2023.COB2023-0220

Direct Numerical Simulation of Turbulent Flow of Power-Law Fluids in Annular Pipe

Submission Author: Lucas L. Palladino , PR
Co-Authors: Lucas L. Palladino, Diogo B. Pitz
Presenter: Lucas L. Palladino

doi://10.26678/ABCM.COBEM2023.COB2023-0497

Influence of a magnetic field induced by a conducting wire on the flow patterns and heat transfer of thermosensitive ferrofluid inside a square cavity

Submission Author: Adriano Rosa , DF
Co-Authors: Luís Castro, Adriano Rosa, Taygoara Oliveira
Presenter: Adriano Rosa

doi://10.26678/ABCM.COBEM2023.COB2023-1619

Intra-REV Pore Heterogeneity Model for Flow of Viscoplastic Material in Porous Media

Submission Author: Allan Barbosa Geoffroy Motta , RJ
Co-Authors: Allan Barbosa Geoffroy Motta, Roney Thompson
Presenter: Allan Barbosa Geoffroy Motta

doi://10.26678/ABCM.COBEM2023.COB2023-2198

Development of Parameterized Mapping: a starting point for the coupling between the structural solver Giraffe and the fluid dynamics solver OpenFOAM

Submission Author: Rodolfo Curci Puraca , SP
Co-Authors: Rodolfo Curci Puraca, Bruno Carmo, Alfredo Gay Neto
Presenter: Rodolfo Curci Puraca

doi://10.26678/ABCM.COBEM2023.COB2023-2068

Slot Die Coating of Thixotropic Liquids

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Carlos Eduardo Sanchez Perez, Danmer Maza, Paulo Roberto de Souza Mendes, Marcio CARVALHO
Presenter: Danmer Maza

doi://10.26678/ABCM.COBEM2023.COB2023-1566

Stability Analysis of Oldroyd-B and Giesekus Fluids in a Planar Jet Flow

Submission Author: Rafael de Lima Sterza , São Paulo
Co-Authors: Rafael de Lima Sterza, Leandro Franco de Souza, André Cavalieri, Marcio Teixeira de Mendonca, Analice Costacurta Brandi
Presenter: Rafael de Lima Sterza

doi://10.26678/ABCM.COBEM2023.COB2023-1843

Rheology of oil-in-water silicone oil emulsions

Submission Author: Lucas Dondoni Reinock , ES
Co-Authors: Lucas Dondoni Reinock, Enza Zanon, Giuliano Pereira Sardi, Luiz Henrique Rohr Scherrer do Vale, Lucas Antônio Silveira Silva, Michel de Oliveira dos Santos, Edson Soares, Bruno Loureiro
Presenter: Michel de Oliveira dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2073

Optimization of cement paste formulation for rheometric experiments.

Submission Author: Patricia Tristão , RJ
Co-Authors: Patricia Tristão, Eliana Marin, Paulo Roberto de Souza Mendes, Elias da Conceição Rodrigues
Presenter: Eliana Marin

doi://10.26678/ABCM.COBEM2023.COB2023-2295

Rheological behavior of Nanoparticles in Newtonian fluids

Submission Author: GÉSSICA PALAORO , PR
Co-Authors: GÉSSICA PALAORO, Diogo Elias da Vinha Andrade, LUIS HUMBERTO QUITIAN ARDILA, Admilson Franco
Presenter: GÉSSICA PALAORO

doi://10.26678/ABCM.COBEM2023.COB2023-0764

Experimental Study of Lost Circulation using non-Newtonian fluids in fractured porous media

Submission Author: Cássio Schneider , PR
Co-Authors: Cássio Schneider, Felipe Pereira, Fernando Cesar De Lai, alex waldmann, Andre Leibsohn Martins, Silvio L. M. Junqueira
Presenter: Cássio Schneider

doi://10.26678/ABCM.COBEM2023.COB2023-2050

Predicting Friction Factors in Turbulent Flow of Herschel-Bulkley Fluids: A Radial Basis Function Neural Network Approach

Submission Author: Glaucio Kenji Matoba , SP
Co-Authors: Glaucio Kenji Matoba , Daiane Iceri, Charlie van der Geest, Roney Thompson, Marcelo Souza de Castro
Presenter: Glaucio Kenji Matoba

doi://10.26678/ABCM.COBEM2023.COB2023-1123

INFLUENCE OF GRAPHENE ON THE RHEOLOGICAL PROPERTIES OF WAXY OIL

Submission Author: rufino epesse , RS
Co-Authors: rufino epesse, Cezar Otaviano Ribeiro Negrao, GÉSSICA PALAORO, Ricardo Jorge Espanhol Andrade, Nathália Maria Moraes Fernandes, Diogo Elias da Vinha Andrade
Presenter: rufino epesse

doi://10.26678/ABCM.COBEM2023.COB2023-0370

Laminar Separation Bubbles Analysis of Giesekus Fluid Flow

Submission Author: Beatriz Liara Carreira , SP
Co-Authors: Beatriz Liara Carreira, Daniel Rodriguez, Elmer Gennaro, Analice Costacurta Brandi, Leandro Franco de Souza
Presenter: Beatriz Liara Carreira

doi://10.26678/ABCM.COBEM2023.COB2023-1636

Theoretical and Analytical Modeling 4

A SINGULAR CONSTITUTIVE RELATION FOR SATURATED/UNSATURATED FLOWS THROUGH POROUS MEDIA

Submission Author: Maria Laura Martins-Costa , RJ
Co-Authors: Lucas Neves de Almeida, Maria Laura Martins-Costa, ROGERIO GAMA
Presenter: Lucas Neves de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-1316

RELIABILITY COMPARISONS AND DIFFERENCES BETWEEN DARCY-WEISBACH, COLERBROKE-WHITE E MOODY-ROUSE EQUATIONS

Submission Author: Rodrigo Ferreira , SP
Co-Authors: Rodrigo Ferreira, Dawson Tadeu Izola
Presenter: Rodrigo Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-0894

INTEGRAL TRANSFORM SOLUTION OF INCOMPRESSIBLE FLOW WITH TRANSIENT PRESSURE GRADIENT

Submission Author: Krishina Dasa Alves Da Costa , RJ
Co-Authors: Krishina Dasa Alves Da Costa, Isabela Florindo Pinheiro, Leandro Alcoforado Sphaier, Diego Knupp
Presenter: Krishina Dasa Alves Da Costa

doi://10.26678/ABCM.COBEM2023.COB2023-1766

Optimizing Contaminant Source Identification with MLP Neural Network

Submission Author: Guido Fraga Mares Guia de Carvalho , RJ
Co-Authors: Guido Fraga Mares Guia de Carvalho, Antônio Silva Neto, Diego Knupp, David Pelta
Presenter: Guido Fraga Mares Guia de Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-1625

Fracture, Fatigue, and Structural Integrity

Fatigue 9

The generalization and analysis of the Stüssi model for several fatigue damage parameters

Submission Author: Diogo Karmouche , SP
Co-Authors: Diogo Karmouche, José António Fonseca de Oliveira Correia, Aparecido Carlos Goncalves
Presenter: Diogo Karmouche

doi://10.26678/ABCM.COBEM2023.COB2023-1122

Fatigue life prediction of medium carbon steel with an artificial defect based on small crack growth relations

Submission Author: Nathalia Santos , DF
Co-Authors: Nathalia Santos, Fábio Castro
Presenter: Nathalia Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0152

FATIGUE CRACK GROWTH IN LASER-TREATED AA2198-T851 ALLOY UNDER ZERO-TO-TENSION LOADING

Submission Author: Cauê Carvalho , SP
Co-Authors: Cauê Carvalho, Gabriel Cotrim de Cesare Peinado, João Pascon, Milton Sergio Fernandes de Lima, Carlos Antonio Reis Pereira Baptista
Presenter: Cauê Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-0535

Use of Stress Gradient Factor for Welded Structures

Submission Author: Antonio Carlos de Oliveira Miranda , DF
Co-Authors: Antonio Carlos de Oliveira Miranda, Paulo Oliveira Júnior
Presenter: Antonio Carlos de Oliveira Miranda

doi://10.26678/ABCM.COBEM2023.COB2023-0514

Analysis of Fatigue Crack Growth Behaviour and the Influence of Corrosion of ASTM A285C Steel Applied in Kraft Continuous Digester

Submission Author: alexandre nakayama , pr
Co-Authors: alexandre nakayama, ANDRE LUIS MOREIRA DE CARVALHO, João Paulo Gabre Ferreira
Presenter: alexandre nakayama

doi://10.26678/ABCM.COBEM2023.COB2023-1074

A hybrid model of stress-life and strain-life fatigue used to predict high power electrical rotating machines fan fatigue damage.

Submission Author: Pedro Martins de Oliveira , BA
Co-Authors: Pedro Martins de Oliveira, Angelo Carvalho, Bruna Luiza dos Santos
Presenter: Pedro Martins de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-2017

Influence of microstructure on the fatigue properties of Ti-6Al-4V alloy with equiaxed and fully lamellar structures

Submission Author: Martin Ferreira Fernandes , SP
Co-Authors: Martin Ferreira Fernandes, Verônica Velloso, Herman J. C. Voorwald
Presenter: Martin Ferreira Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-1347

Comparative study of multiaxial fatigue life prediction methodologies based on critical plane approaches: a review of Maximum Variance Method (MVM) and optimization algorithms

Submission Author: Felipe Maganha de Lima , DF
Co-Authors: Felipe Maganha de Lima, JORGE FERREIRA
Presenter: Felipe Maganha de Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1064

A Study of Lightweight Assembled Crankshaft Behavior

Submission Author: Gabriel Silva , SP
Co-Authors: Gabriel Silva, Marco Bittencourt, Renan Ferreira
Presenter: Gabriel Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0804

Fracture 5

Comparative study of the tensile strength of internal threads versus the use of false threads (helicoil) in aluminum alloy

Submission Author: Claysson Vimieiro , MG
Co-Authors: Claysson Vimieiro
Presenter: Claysson Vimieiro

doi://10.26678/ABCM.COBEM2023.COB2023-1647

COMPARING CHARPY IMPACT TEST USING SPECIMENS OF DIFFERENT SIZES FOR AISI 4340 STEEL

Submission Author: Guilherme Henrique Alves Andrade , MG
Co-Authors: Rodrigo Freitas da Silva Alvarenga, Guilherme Henrique Alves Andrade, João Pedro Cândido José , Sinésio Franco, Rosenda Arencibia, Daniel Correia Freire Ferreira, Rafael Pacheco, Luciano José Arantes
Presenter: Luciano José Arantes

doi://10.26678/ABCM.COBEM2023.COB2023-2414

Fracture Nucleation and Propagation Based on Discrete Topological Derivative

Submission Author: William Garcia , ES
Co-Authors: William Garcia, Marcel Xavier
Presenter: William Garcia

doi://10.26678/ABCM.COBEM2023.COB2023-0466

Notched Strength of Woven Reinforcement Composites Under Mixed-Mode In-Plane Loading

Submission Author: Felipe Ruivo Fuga , SC
Co-Authors: Felipe Ruivo Fuga, Mauricio Donadon
Presenter: Felipe Ruivo Fuga

doi://10.26678/ABCM.COBEM2023.COB2023-1652

Application of Micromechanically-Based Damage Model to Ductile Tearing Behaviour of Interacting Surface Cracks

Submission Author: Gabriel de Castro Coêlho , PB
Co-Authors: Gabriel de Castro Coêlho, Antonio Almeida Silva, Marco Antonio dos Santos
Presenter: Gabriel de Castro Coêlho

doi://10.26678/ABCM.COBEM2023.COB2023-0380

Pipelines and Pipes 5

STRESS ANALYSIS VIA FINITE ELEMENTS IN STRAIGHT AND CURVED PIPELINES CONTAINING DENT DEFECTS

Submission Author: Maize Cibele de Lima Melo , RN
Co-Authors: Maize Cibele de Lima Melo, Paulo Roberto Maciel Lyra, Ramiro Willmersdorf, juliana torres , Adriano Dayvson Marques Ferreira
Presenter: Maize Cibele de Lima Melo

doi://10.26678/ABCM.COBEM2023.COB2023-2002

EFFECT OF SILICA ADDITION IN THE ADHESIVE PRIMER LAYER OF COMPOSITE SYSTEMS USED TO REPAIR LEAK DEFECTS IN PIPELINES

Submission Author: Heraldo da Costa Mattos , RJ
Co-Authors: Camila Ranucci de Luca, Mauro Jorge Rocha FIlho, João Marciano Laredo dos Reis, Heraldo da Costa Mattos
Presenter: Heraldo da Costa Mattos

doi://10.26678/ABCM.COBEM2023.COB2023-2138

SIF FOR TRUNNION PIPE SUPPORT: A COMPARISON BETWEEN FEA DATA AND ASME B31J WITH FOCUS ON LARGE BORE PIPES

Submission Author: LUIS FERNANDO MOURA , SP
Co-Authors: MARIA LUIZA SCORALICK SALDANHA, LUIS FERNANDO MOURA
Presenter: MARIA LUIZA SCORALICK SALDANHA

doi://10.26678/ABCM.COBEM2023.COB2023-0233

Collapse of subsea pipelines: Numerical study on the interaction of corrosion defects with different geometric properties

Submission Author: Savanna Cristina Medeiros D'Aguiar , PE
Co-Authors: Savanna Cristina Medeiros D'Aguiar, Silvana Maria Bastos Afonso da Silva, RENATO MOTTA
Presenter: Savanna Cristina Medeiros D'Aguiar

doi://10.26678/ABCM.COBEM2023.COB2023-1669

Risk quantification in corroded offshore pipelines using semi-empirical methods and finite element models

Submission Author: Elyaquim Domingos Torres , PE
Co-Authors: Elyaquim Domingos Torres, juliana torres , Silvana Maria Bastos Afonso da Silva, Andréa Raffaella Avelar Pimentel Vila Nova, Nadège Bouchonneau
Presenter: Elyaquim Domingos Torres

doi://10.26678/ABCM.COBEM2023.COB2023-1934

Pressure Vessels 2

ANALYSIS OF SEMI-ELLIPTICAL CRACK GROWTH IN PRESSURE VESSELS

Submission Author: Hallan Ladeira , DF
Co-Authors: Hallan Ladeira, Carla Anflor
Presenter: Hallan Ladeira

doi://10.26678/ABCM.COBEM2023.COB2023-0726

Numerical analysis of different boss geometries for a composite overwrapped pressure vessel

Submission Author: Estêvão Santos Laureano da Cunha , RS
Co-Authors: Estêvão Santos Laureano da Cunha, Henrique R. Mença, Lucas Agne, Sandro Amico, Maikson Luiz Passaia Tonatto
Presenter: Estêvão Santos Laureano da Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0475

Structural Integrity 7

ASSESSMENT OF MECHANICAL PERFORMANCE IN A PLATE HEAT EXCHANGER ENHANCED BY A THICKER REINFORCEMENT PLATE

Submission Author: Giovani Martins , SC
Co-Authors: Giovani Martins, kleber paiva, Jorge Luiz Oliveira
Presenter: Giovani Martins

doi://10.26678/ABCM.COBEM2023.COB2023-2151

Structural health monitoring of a fixed structure based on the ultrasonic technique

Submission Author: Larissa Pereira , MG
Co-Authors: Larissa Pereira, Fernanda Beatriz Aires de Freitas, Beatriz Marangoni, leandro stival, Valder Steffen Jr, Aldemir Ap Cavalini Jr
Presenter: Larissa Pereira

doi://10.26678/ABCM.COBEM2023.COB2023-0301

Experimental study of fatigue crack propagation monitoring using Acoustic Emission

Submission Author: Beatriz Marangoni , MG
Co-Authors: Beatriz Marangoni, Fernanda Beatriz Aires de Freitas, Larissa Pereira, leandro stival, Aldemir Ap Cavalini Jr, Valder Steffen Jr
Presenter: Beatriz Marangoni

doi://10.26678/ABCM.COBEM2023.COB2023-0645

Mechanical-structural Monitoring System Based in Model Analysis for Bucket Wheel Excavators

Submission Author: Reuel Vieira , MG
Co-Authors: Reuel Vieira, Marco Túlio Faria
Presenter: Marco Túlio Faria

doi://10.26678/ABCM.COBEM2023.COB2023-0319

Structural Monitoring of Power Transmission Tower by Internet of Things

Submission Author: José Mascarenhas Lima Neto , SE
Co-Authors: José Mascarenhas Lima Neto, Victor Emanuel Ribeiro de Santana, Gustavo Moura, Rodrigo Borges Santos, José Aguiar dos Santos Junior, Alexandre Carlos Rodrigues Ramos
Presenter: Rodrigo Borges Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1609

Characterization and experimental analysis of Stress Corrosion Cracking and its influence on the structural integrity and mechanical properties of the magnesium alloy WE 43.

Submission Author: Geraldine Hincapie Diaz , SP
Co-Authors: Geraldine Hincapie Diaz, Marcelo Leite Ribeiro
Presenter: Geraldine Hincapie Diaz

doi://10.26678/ABCM.COBEM2023.COB2023-1448

On the use of different image filters for damage detection in concrete-like structures using aerial photographs from UAV

Submission Author: Bruno Soares dos Santos , SP
Co-Authors: Bruno Soares dos Santos , Renan Sanches Geronel, Camila Gianini Gonsalez Bueno, Douglas Bueno, Rodrigo Borges Santos
Presenter: Lorena Lopes Dias

doi://10.26678/ABCM.COBEM2023.COB2023-1825

Heating, Ventilation, Air-Conditioning and Refrigeration

Air-conditioning 8

Performance Verification of Cleanrooms in an INCA Pharmacy

Submission Author: Oseas Carlos da Silva , RJ
Co-Authors: Oseas Carlos da Silva, Manoel Antônio da Fonseca Costa Filho
Presenter: Oseas Carlos da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0051

Influence of Condensation and Evaporation Modeling in the Simulation of Split Air Conditioning Systems

Submission Author: Gabriel Lisbôa Verissimo , RJ
Co-Authors: Fabiano Aragao, Gabriel Lisbôa Verissimo
Presenter: Gabriel Lisbôa Verissimo

doi://10.26678/ABCM.COBEM2023.COB2023-1280

Experimental Thermal Performance Evaluation of an Automotive Air Conditioning System

Submission Author: Diogo Lôndero Da Silva , SC
Co-Authors: Diogo Lôndero Da Silva, Igor Santos de Oliveira, Aline Durrer Patelli Juliani, Filipe Fischer, Guilherme Medeiros de Cordova
Presenter: Diogo Lôndero Da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1460

Theoretical performance evaluation of the new zeotropic refrigerant R457B and its blends in a vapor compression refrigeration cycle

Submission Author: Leonardo Nascimento , MG
Co-Authors: Leonardo Nascimento, Luís Antônio Bortolaia
Presenter: Leonardo Nascimento

doi://10.26678/ABCM.COBEM2023.COB2023-0422

Modeling and simulation of a cassette fan coil system for efficient cooling in indoor environments

Submission Author: Flávio Júnior Santiago Silva , PR
Co-Authors: Flávio Júnior Santiago Silva, Diego de Lima Sousa, Iago Gomes Costa, Anne Defranceschi Oliveira, Carlos Henrique Matiolo, Heloísa da Silva, JOSÉ VIRIATO COELHO VARGAS, André Bellin Mariano
Presenter: Flávio Júnior Santiago Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2122

TECHNICAL-ECONOMIC COMPARISON OF UNITARY AIR CONDITIONING AND VRF SYSTEMS FOR HIGH STANDARD RESIDENCES IN MANAUS CITY

Submission Author: Mateus Rodrigues de Andrade , AM
Co-Authors: Mateus Rodrigues de Andrade, João D'Anuzio Lima de Azevedo
Presenter: João D'Anuzio Lima de Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-1377

Numerical modeling of a direct refrigerant two-phase cooling system for the thermal management of electric vehicle battery

Submission Author: Ernane Silva , SC
Co-Authors: Ernane Silva, Thiago Dutra
Presenter: Ernane Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1077

LOW-COST DEVICE FOR CO2-BASED AIR RECUPERATOR CONTROL TO REDUCE ENERGY CONSUMPTION WITHOUT CHANGING MINIMUM HEALTH PARAMETERS.

Submission Author: Wanderson Phillype , PE
Co-Authors: Wanderson Phillype , Evandro Pedro Alves de Mendonça, Ednaldo Lacerda Júnior
Presenter: Arthur Cleydson

doi://10.26678/ABCM.COBEM2023.COB2023-2264

Heating 1

Strategies to Operate a Thermal Storage Device Integrated into an Air-Source Heat Pump for Residential Space and Water Heating

Submission Author: Conrado Ermel , RS
Co-Authors: Conrado Ermel, Marcus Bianchi, Paulo Smith Schneider
Presenter: Conrado Ermel

doi://10.26678/ABCM.COBEM2023.COB2023-1302

Refrigeration 15

ENERGY OPTIMIZATION TO REPLACE R134A IN A VAPOR COMPRESSION REFRIGERATION CYCLE

Submission Author: Thiago Pereira Silva , MG
Co-Authors: Thiago Pereira Silva, Kássio Nogueira Cançado, Katrine Barbosa Oliveira Chaves, Ramon de Paoli, Luiz Machado
Presenter: Katrine Barbosa Oliveira Chaves

doi://10.26678/ABCM.COBEM2023.COB2023-0489

PERFORMANCE ANALYSIS OF THERMOELECTRIC COOLERS IN SERIES AND PARALLEL CONFIGURATIONS

Submission Author: Bernardo Vieira , SC
Co-Authors: Bernardo Vieira, Jader Riso Barbosa Jr., Jaime Lozano
Presenter: Bernardo Vieira

doi://10.26678/ABCM.COBEM2023.COB2023-1342

Transient Modeling for the Energy Consumption Prediction in a Portable Refrigerator

Submission Author: Guilherme Borges Ribeiro , SP
Co-Authors: Luis Guilherme Fonseca Franco, Guilherme Borges Ribeiro
Presenter: Luis Guilherme Fonseca Franco

doi://10.26678/ABCM.COBEM2023.COB2023-0360

Numerical simulation of external sweating in a static refrigerator

Submission Author: Vitor Fiorito , MS
Co-Authors: Vitor Fiorito, Leandro Salviano
Presenter: Vitor Fiorito

doi://10.26678/ABCM.COBEM2023.COB2023-0753

Numerical and experimental assessment of a hybrid active magnetic regenerator manufactured with Gd and La-Fe-Si alloys

Submission Author: Paulo Vitor de faria , SC
Co-Authors: Rogerio Sucaria, Paulo Vitor de faria, Bernardo Vieira, Hígor Feltrin Teza, Jaime Lozano, Jader Riso Barbosa Jr.
Presenter: Rogerio Sucaria

doi://10.26678/ABCM.COBEM2023.COB2023-2010

Improving Thermal Insulation of Compressor Cooling Capacity Measurement Vessel through Heat Leakage Factor Reduction

Submission Author: Luiz Hegele , SC
Co-Authors: Raul Gilmar de Carvalho, Luiz Hegele
Presenter: Raul Gilmar de Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-1673

Analysis of the thermoelectric potential of a homemade Peltier refrigeration system under different electrical operating conditions.

Submission Author: Claysson Campos Soares , SP
Co-Authors: Claysson Campos Soares, Jessica Martha Nunes, Marcelo Marques da Silva
Presenter: Jessica Martha Nunes

doi://10.26678/ABCM.COBEM2023.COB2023-0387

Performance prediction of a novel compact magnetocaloric wine cooler

Submission Author: Natália Maleski de Sá , SC
Co-Authors: Natália Maleski de Sá, Glenda de Melo Luz, Alan Nakashima, Elias Pagnan, Anderson Lorenzoni, Guilherme Fidelis Peixer, Jaime Lozano, Jader Riso Barbosa Jr.
Presenter: Alan Nakashima

doi://10.26678/ABCM.COBEM2023.COB2023-1359

Optimization of a Magnetocaloric Air Conditioner Prototype

Submission Author: Rogerio Sucaria , SC
Co-Authors: Rogerio Sucaria, Anderson Lorenzoni, Yan Azeredo, Alan Nakashima, Guilherme Fidelis Peixer, Jaime Lozano, Jader Riso Barbosa Jr.
Presenter: Yan Azeredo

doi://10.26678/ABCM.COBEM2023.COB2023-1613

Modelling the dynamic operation of a magnetic refrigerator via recurrent neural networks

Submission Author: Guilherme Fidelis Peixer , SC
Co-Authors: Pedro Miola Silva, Yan Azeredo, Anderson Lorenzoni, Guilherme Fidelis Peixer, Rodolfo C. C. Flesch, Jaime Lozano, Jader Riso Barbosa Jr.
Presenter: Guilherme Fidelis Peixer

doi://10.26678/ABCM.COBEM2023.COB2023-1603

Total Equivalent Warming Impact of alternative refrigerants for replacement of R-22

Submission Author: Willian Moreira Duarte , MG
Co-Authors: Leonardo Victor Silva Martins, Luiz Machado, Tiago de Freitas Paulino, Juan Jose Garcia Pabon, Willian Moreira Duarte
Presenter: Willian Moreira Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-1234

Design of a small-capacity refrigeration machine operating with R744 and capillary tube

Submission Author: Willian Moreira Duarte , MG
Co-Authors: Willian Moreira Duarte, Lucas Cordeiro Pereira Lima, Yuri Paula, Tiago de Freitas Paulino, Antônio Maia
Presenter: Willian Moreira Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-1623

Experimental analysis of an absorption refrigeration cycle run by thermal energy released in an internal combustion engine operating with ethanol

Submission Author: Cristiana Brasil Maia , MG
Co-Authors: Cristiana Brasil Maia, Guilherme Loyola França de Vasconcellos, Sergio Hanriot
Presenter: Cristiana Brasil Maia

doi://10.26678/ABCM.COBEM2023.COB2023-0249

EVALUATION OF THE LITERATURE ON THE INCREASE IN THE PERFORMANCE OF STEAM COMPRESSION REFRIGERATION SYSTEMS THROUGH THE APPLICATION OF NANOPARTICLES

Submission Author: Alexandre Magno Vieira Gonçalves de Brito , PB
Co-Authors: Alexandre Magno Vieira Gonçalves de Brito, José Luciano B Moreira, Adriano Marques, monica carvalho
Presenter: José Luciano B Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-1307

CO2 TRANCRITICAL REFRIGERATION SYSTEMS USING EJECTOR: A-STATE-OF-THE-ART REVIEW.

Submission Author: Frank Wiliam Adolfo Blanco Ojeda , MG
Co-Authors: Frank Wiliam Adolfo Blanco Ojeda, ENIO PEDONE BANDARRA FILHO
Presenter: Frank Wiliam Adolfo Blanco Ojeda

doi://10.26678/ABCM.COBEM2023.COB2023-0880

Ventilation 3

Numerical analysis of a solar chimney for building ventilation

Submission Author: Cyro Albuquerque Neto , SP
Co-Authors: Vinicius Branzani Leite, Thales De Freitas Villas Bôas, Cyro Albuquerque Neto
Presenter: Vinicius Branzani Leite

doi://10.26678/ABCM.COBEM2023.COB2023-0238

PREDICTING OF TEMPERATURES PROFILES ALONG AN EARTH-AIR HEAT EXCHANGER (EAHE) USING ARTIFICIAL NEURAL NETWORKS

Submission Author: Gerson Henrique dos Santos , PR
Co-Authors: Leonardo Bruno Foltran, Hugo Siqueira, Gerson Henrique dos Santos, Victor Vaurek Dimbarre, Thiago Antonini Alves
Presenter: Gerson Henrique dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1222

PERFORMANCE ANALYSIS FOR A CROSS-FLOW FAN IN A HOUSEHOLD EVAPORATIVE COOLER

Submission Author: Robson Leal da Silva , MS
Co-Authors: Matheus Garros, Patrick Oliveira Guedes, Robson Leal da Silva
Presenter: Matheus Garros

doi://10.26678/ABCM.COBEM2023.COB2023-1718

Materials and Manufacturing Engineering

Additive Manufacturing 48

A study on the applicability of GTAW as an energy source for DED and PBF processes in Additive Manufacturing

Submission Author: Alcindo Moreira , SP
Co-Authors: Alcindo Moreira, Reginaldo Coelho, Fábio Mariani
Presenter: Alcindo Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-0138

Laser Directed Energy Deposition Process Optimization Parameters for AISI 410L Single Layers

Submission Author: Jurandir Sousa , PA
Co-Authors: Jurandir Sousa, Milton Pereira, Henrique Santos Ferreira, Anselmo Thiesen Junior, Juliane Ribeiro da Cruz Alves
Presenter: Jurandir Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-0684

Comparing Metal Filaments and Pellets for Material Extrusion in Additive Manufacturing: A Review.

Submission Author: Victor Wassano Buchwitz , PR
Co-Authors: Victor Wassano Buchwitz, Bernardo Fabricio Martins Gonçalves, Luciano Zart Olanyk, Lucas Freitas Berti, Neri Volpato
Presenter: Victor Wassano Buchwitz

doi://10.26678/ABCM.COBEM2023.COB2023-1182

Comparison of impact resistance of annealed 3d printed PLA according to different Izod ASTM test standards

Submission Author: Lucas Melo Queiroz Barbosa , MG
Co-Authors: Felipe dos Anjos Rodrigues Campos, Lucas Melo Queiroz Barbosa, Kauã Ferreira de Almeida, Pedro Henrique Veiga Oliveira, Thiago de Oliveira Santos, Leonardo Rosa Ribeiro da Silva , Álisson Rocha Machado
Presenter: Lucas Melo Queiroz Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-0505

Void Reduction Strategies in Material Extrusion Additive Manufacturing of Metal Parts: A Review

Submission Author: Felipe Di Nisio , PR
Co-Authors: Felipe Di Nisio, Neri Volpato
Presenter: Felipe Di Nisio

doi://10.26678/ABCM.COBEM2023.COB2023-0620

COMPARATIVE STUDY OF MECHANICAL PROPERTIES OF POLYAMIDE 12 MANUFACTURED BY ADDITIVE MANUFACTURING AND CONVENTIONAL PROCESSES

Submission Author: Rodrigo Coelho , BA
Co-Authors: Joyce Mara Brandão Maia, Bruno Caetano dos Santos Silva, Luã Fonseca Seixas, Alexandre Dourado, Pollyana Cardoso, Valter Estevão Beal, Rodrigo Coelho
Presenter: Joyce Mara Brandão Maia

doi://10.26678/ABCM.COBEM2023.COB2023-2119

RP3: A research framework for process planning in additive manufacturing

Submission Author: Neri Volpato , PR
Co-Authors: Neri Volpato, Felipe Di Nisio, Henrique Romaniuk Ramalho, Rodrigo Minetto, Ricardo Dutra da Silva
Presenter: Neri Volpato

doi://10.26678/ABCM.COBEM2023.COB2023-0685

TOWARDS THE FLOWABILITY AND SPREADABILITY OF CEMENTED CARBIDES AND CERMET POWDERS FOR ADDITIVE MANUFACTURING: EXPERIMENTAL AND NUMERICAL APPROACH – PART 1

Submission Author: Fabio Miranda , SP
Co-Authors: Fabio Miranda, André Maiolini, Marcelo Otavio dos Santos , Daniel Rodrigues, Suzilene Real Janasi, Gilmar Batalha
Presenter: Fabio Miranda

doi://10.26678/ABCM.COBEM2023.COB2023-0100

Additive manufacturing of copper-graphene composites by 3D-Extrusion

Submission Author: Milene Follmann , RS
Co-Authors: Milene Follmann, Camila Gonçalves, Manuela Furlani da Silva Soares, Natalia Daudt
Presenter: Milene Follmann

doi://10.26678/ABCM.COBEM2023.COB2023-1525

Development of a Robotic Additive Manufacturing Cell Based on Laser Metal Deposition Process at the University of Coimbra and University of Brasilia

Submission Author: Alberto Alvares , DF
Co-Authors: Alberto Alvares, Carlos Zhu, Luis Simoes da Silva, Trayana Tankova, Igor Lacroix, Brayan Stiven Figueroa Betancourth
Presenter: Brayan Stiven Figueroa Betancourth

doi://10.26678/ABCM.COBEM2023.COB2023-0718

Characterization of Nanocomposite Powders for Additive Manufacturing

Submission Author: Gustavo Scheid Prass , SC
Co-Authors: Gustavo Scheid Prass, Victor Chastinet, Ana Sofia D'Oliveira
Presenter: Gustavo Scheid Prass

doi://10.26678/ABCM.COBEM2023.COB2023-1472

Mechanical Performance of Inconel 625 Alloy Processed by L-DED Additive Manufacturing

Submission Author: Juliane Ribeiro da Cruz Alves , SP
Co-Authors: Juliane Ribeiro da Cruz Alves, Henrique Santos Ferreira, Anselmo Thiesen Junior, Jurandir Sousa
Presenter: Juliane Ribeiro da Cruz Alves

doi://10.26678/ABCM.COBEM2023.COB2023-1350

Effect of laser powder bed fusion processing parameters on densification behavior and microhardness of Inconel 625/NbC composites

Submission Author: Amanda Lemos , SC
Co-Authors: Amanda Lemos, Guilherme Volpato, Erick Cardoso Costa, Fabio Antonio Xavier, Milton Pereira, Marcio C. Fredel
Presenter: Marcio C. Fredel

doi://10.26678/ABCM.COBEM2023.COB2023-1600

Thermomechanical analysis of Wire Arc Additive Manufacturing by Finite Element Method

Submission Author: Vitor Seiji Andrade Tatemoto , SC
Co-Authors: Vitor Seiji Andrade Tatemoto, José Carlos Pereira, Daniel Galeazzi
Presenter: Vitor Seiji Andrade Tatemoto

doi://10.26678/ABCM.COBEM2023.COB2023-0117

17-4 PH Stainless Steel deposited by the Metallic Fused Filament Fabrication (FFF) process

Submission Author: Júlia Fornaziero de Almeida , SP
Co-Authors: Júlia Fornaziero de Almeida, Fábio Mariani, Raul Jeronymo, Reginaldo Coelho
Presenter: Júlia Fornaziero de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-1444

Additive Manufacturing of Copper by 3D Extrusion

Submission Author: Camila Gonçalves , RS
Co-Authors: Camila Gonçalves, Manuela Furlani da Silva Soares, Milene Follmann, Natalia Daudt
Presenter: Camila Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1314

Evaluation of tensile strength anisotropy in preforms of austenitic stainless steel 316L-Si obtained by wire arc additive manufacturing

Submission Author: Igo Jose , PB
Co-Authors: Igo Jose , Júlio Feitosa da Silva Neto, Joyce Ingrid Venceslau de Souto, Yuri Dias, Gabriel de Castro Coêlho, Jefferson Segundo de Lima
Presenter: Jefferson Segundo de Lima

doi://10.26678/ABCM.COBEM2023.COB2023-0809

Robotic Additive Manufacturing System: Study of the influence of motion parameters on the mechanical properties of 3D-printed tensile specimens

Submission Author: Rafaela Silva Barbosa , SP
Co-Authors: Rafaela Silva Barbosa, João Fiore Parreira Lovo, Sidney Bruce Shiki, Gustavo Barbosa
Presenter: Rafaela Silva Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-1353

TENSILE STRENGTH SPECIMENS FOR NON-SOLID BLOCK SUPPORT STRUCTURES MANUFACTURED BY LASER POWDER BED FUSION: A PRELIMINARY STUDY

Submission Author: Dan Gallego , SC
Co-Authors: Dan Gallego, Henrique Oliveira, Neri Volpato
Presenter: Dan Gallego

doi://10.26678/ABCM.COBEM2023.COB2023-0828

Comparative analysis of ABS test specimens produced through additive manufacturing and thermoplastic injection

Submission Author: Vanessa Alonso Rodrigues , SP
Co-Authors: Vanessa Alonso Rodrigues, Roberto Giani Pattaro Junior, Guilherme Paes de Souza, Hugo Sakai Idagawa
Presenter: Roberto Giani Pattaro Junior

doi://10.26678/ABCM.COBEM2023.COB2023-1809

Numerical simulation of the thermal behavior in the deposition of a multilayer wall of steel AISI 316 by DED-PTA

Submission Author: Rodrigo Aparecido da Silva , PR
Co-Authors: Rodrigo Aparecido da Silva, Heber Abreu Castillo, Ana Sofia D'Oliveira, Americo Scotti
Presenter: Rodrigo Aparecido da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1582

Free software tools for Additive Manufacturing process planning

Submission Author: Laureana Stelmastchuk Benassi Fontolan , SP
Co-Authors: Laureana Stelmastchuk Benassi Fontolan, Vinícius Rocha de Moraes Alves, Marcelo Oliveira , Pedro Noritomi
Presenter: Laureana Stelmastchuk Benassi Fontolan

doi://10.26678/ABCM.COBEM2023.COB2023-1883

Investigating the Relationship Between Mass and Flexural Resistance in Material Extrusion Additive Manufacturing of Carbonyl Iron Components: A Comparative Study with Metal Injection Molding

Submission Author: Augusto Adami Vidal , SC
Co-Authors: Augusto Adami Vidal, Fernando Irto Zanetti, Gustavo Alves Lau, Guilherme Fatalla, Arthur Cruz, Aloisio Nelmo Klein, Rodrigo Perito Cardoso
Presenter: Augusto Adami Vidal

doi://10.26678/ABCM.COBEM2023.COB2023-1446

Development of a Digital Twin for a Robotic Additive Manufacturing System Based on Laser Metal Deposition (LMD) Process

Submission Author: Alberto Alvares , DF
Co-Authors: Alberto Alvares, Igor Lacroix, Marco Aurélio Maron, Brayan Stiven Figueroa Betancourth, Lucas de Souza Dantas Amorim Araújo
Presenter: Brayan Stiven Figueroa Betancourth

doi://10.26678/ABCM.COBEM2023.COB2023-0208

Applying a Multi-Armed Bandit (MAB) Problem-based Algorithm to optimize printing routes in GMAW Additive Manufacturing

Submission Author: Americo Scotti , MG
Co-Authors: Rafael Pereira Ferreira
Presenter: Americo Scotti

doi://10.26678/ABCM.COBEM2023.COB2023-2392

Residual Stress in Additive Manufactured Polymers

Submission Author: Arthur Adeodato , RJ
Co-Authors: Arthur Adeodato, Yago Chagas Santos Santiago de Moura, Lucas Vignoli, Daniel de Macedo Barreto Netto, Brenno Tavares Duarte, Paulo Pedro Kenedi
Presenter: Arthur Adeodato

doi://10.26678/ABCM.COBEM2023.COB2023-0962

Finite element analyses modeling for additive manufacturing tracking thermal and mechanical properties in lattice structures

Submission Author: Euclides Delgado Marques Santanna , DF
Co-Authors: Euclides Delgado Marques Santanna, Carla Anflor
Presenter: Euclides Delgado Marques Santanna

doi://10.26678/ABCM.COBEM2023.COB2023-1156

Development of zeolite ceramic paste for material extrusion additive manufacturing

Submission Author: Sergio Lucas Santos Rocha , PR
Co-Authors: Sergio Lucas Santos Rocha, Gustavo Xavier Peres, Bernardo Fabricio Martins Gonçalves, Luigi Roehrig Segala, Lucas Freitas Berti, Neri Volpato
Presenter: Sergio Lucas Santos Rocha

doi://10.26678/ABCM.COBEM2023.COB2023-1973

Material Characterization of Metal Parts Printed With Highly-Filled Polymers Fillaments: A Review

Submission Author: Bruno Benegra Denadai , Buscando endereço...
Co-Authors: Bruno Benegra Denadai , Jean fernando farias, Felipe Di Nisio, Rodrigo Lupinacci Villanova, Neri Volpato, Lucas Freitas Berti
Presenter: Felipe Di Nisio

doi://10.26678/ABCM.COBEM2023.COB2023-0669

Modeling of the Directed Energy Deposition (DED) process to obtain residual stress states of simplified tracks

Submission Author: Felipe Carneiro , SP
Co-Authors: Felipe Carneiro, Guilherme Fernandes Guimarães, Charles Luís da Silva, Ronnie Rego, Alfredo Faria
Presenter: Felipe Carneiro

doi://10.26678/ABCM.COBEM2023.COB2023-0197

Manufacturing of copper-nickel parts by 3D extrusion pastes

Submission Author: Ana Cavalheiro , RS
Co-Authors: Ana Cavalheiro, Luana Crozatti Rocha , Marcelle Melo de Oliveira, Allana Anniele Barros da Silva , Luana Dalla Vecchia de Lima, Natalia Daudt
Presenter: Ana Cavalheiro

doi://10.26678/ABCM.COBEM2023.COB2023-1295

3D Stereolithography printing of graphene reinforced nanocomposites: chemical and thermal analysis

Submission Author: Rafael Perottoni , RS
Co-Authors: Rafael Perottoni, Natalia Daudt, Fellipe Fiorelli Talamini, Juliana Rosemara Felisberto da Silva, Cândida Brandl, Matheus Klement
Presenter: Rafael Perottoni

doi://10.26678/ABCM.COBEM2023.COB2023-1192

Numerical Simulation of the Additive Manufacturing Process by Laser Powder Bed Fusion

Submission Author: Guilherme Moura , RJ
Co-Authors: Guilherme Moura, Diego Busson de Moraes, Gabriel Rodrigues, Carolina Palma Naveira Cotta
Presenter: Guilherme Moura

doi://10.26678/ABCM.COBEM2023.COB2023-1760

DESIGN FOR ADDITIVE MANUFACTURING GUIDELINES FOR MATERIAL EXTRUSION: A REVIEW

Submission Author: Adele Cagnato Conte , PR
Co-Authors: Adele Cagnato Conte, André Luís Mion, Rodrigo Pulido Arce, Neri Volpato, José Foggiatto
Presenter: André Luís Mion

doi://10.26678/ABCM.COBEM2023.COB2023-1218

INFLUENCE OF POWDER PARTICLE SIZE IN THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF INCONEL 718 COMPONENTS PRODUCED BY LASER-DIRECTED ENERGY DEPOSITION

Submission Author: Johan sebastian Grass Nunez , SP
Co-Authors: Johan sebastian Grass Nunez, Daniel Rojas, Fábio Mariani, Alessandro Rodrigues, Reginaldo Coelho
Presenter: Johan sebastian Grass Nunez

doi://10.26678/ABCM.COBEM2023.COB2023-1215

Study of test bodies manufactured through FDM 3D printing of the material PLA

Submission Author: Igor Gaviano , DF
Co-Authors: Igor Gaviano
Presenter: Igor Gaviano

doi://10.26678/ABCM.COBEM2023.COB2023-0347

Comparative study of the mechanical properties of Ti-6Al-4V alloy manufactured by additive manufacturing using the electron beam melting (EBM) process and by conventional methods.

Submission Author: Caique Movio Pereira de Souza , SP
Co-Authors: Lucas Carlos de Sousa, Caique Movio Pereira de Souza, Rene Oliveira, Vanessa Seriacopi, Rogério Daniel Dantas, Wilson Carlos Silva Junior
Presenter: Caique Movio Pereira de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-1402

Fabrication of Nickel parts using hydrogel pastes

Submission Author: Luana Dalla Vecchia de Lima , RS
Co-Authors: Luana Dalla Vecchia de Lima, Allana Anniele Barros da Silva , Maicon Barcellos Chaves, Ana Cavalheiro, Luana Crozatti Rocha , Marcelle Melo de Oliveira, Natalia Daudt
Presenter: Luana Dalla Vecchia de Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1267

Practical guidelines for ceramic vat photopolymerization developments

Submission Author: Italo Leite de Camargo , SP
Co-Authors: Italo Leite de Camargo, Mateus Mota Morais, Carlos Fortulan
Presenter: Italo Leite de Camargo

doi://10.26678/ABCM.COBEM2023.COB2023-0061

Fabrication of Nb-Si-Al components by Additive Manufacturing Techniques

Submission Author: Eloisa Cardozo , PR
Co-Authors: Eloisa Cardozo, Ana Sofia D'Oliveira
Presenter: Eloisa Cardozo

doi://10.26678/ABCM.COBEM2023.COB2023-1584

INFLUENCE OF ANNEALING ON PLA MECHANICAL AND THERMAL RESISTANCE

Submission Author: Lucas Melo Queiroz Barbosa , MG
Co-Authors: Felipe dos Anjos Rodrigues Campos, Lucas Melo Queiroz Barbosa, Kauã Ferreira de Almeida, Pedro Henrique Veiga Oliveira, Gabriel Candido Andrzejewski , Paulo Filho, Álisson Rocha Machado
Presenter: Lucas Melo Queiroz Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-0503

Effects of the printing parameters on the shape memory effects on 3D printed polylactic acid (PLA)

Submission Author: Brenno Tavares Duarte , RJ
Co-Authors: Brenno Tavares Duarte, Ricardo Alexandre Amar de Aguiar, Pedro Manuel Calas Lopes Pacheco
Presenter: Brenno Tavares Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-0997

Evaluation of 3D-printability of copper metal pastes.

Submission Author: Manuela Furlani da Silva Soares , SP
Co-Authors: Manuela Furlani da Silva Soares, Camila Gonçalves, Milene Follmann, Natalia Daudt, Maria José Silva Carvalho, Fernanda Signor
Presenter: Manuela Furlani da Silva Soares

doi://10.26678/ABCM.COBEM2023.COB2023-1813

THE USE OF LOW-POWER BLUE LASERS IN ADDITIVE MANUFACTURING OF SMALL STRUCTURES

Submission Author: Tiago Borsoi Klein , Berlin
Co-Authors: Tiago Borsoi Klein, Ralf Förster, Ulrike Siemer, Andreas Loth
Presenter: Tiago Borsoi Klein

doi://10.26678/ABCM.COBEM2023.COB2023-2384

ROBOTIC ADDITIVE MANUFACTURING SYSTEM: DEVELOPMENT OF MATHEMATICAL MODELING TO PREPARE 3D PRINTING PROCESSES FOR ABS COPOLYMER

Submission Author: Eduardo Costa Pulquerio , SP
Co-Authors: Eduardo Costa Pulquerio, Arthur Pasotti, Gustavo Barbosa, Sidney Bruce Shiki
Presenter: Eduardo Costa Pulquerio

doi://10.26678/ABCM.COBEM2023.COB2023-0922

Is hybrid additive manufacturing the best option comparing cost, quality, productivity and flexibility? A case study using Bia Area Additive Manufacturing (BAAM) and Fused Filament Fabrication (FFF) for a bearing manufacturing.

Submission Author: Alex Camilli Bottene , SP
Co-Authors: JESIEL ROCHA, Damião Fiuza, Alex Camilli Bottene, Givanildo Santos
Presenter: Alex Camilli Bottene

doi://10.26678/ABCM.COBEM2023.COB2023-1886

A REVIEW OF METALLIC BINDER JETTING PROCESSES WITH THERMAL INKJET HEADS

Submission Author: Rodrigo Pulido Arce , PR
Co-Authors: Rodrigo Pulido Arce, Adele Cagnato Conte, Bruno Benegra Denadai , Neri Volpato, José Foggiatto
Presenter: Rodrigo Pulido Arce

doi://10.26678/ABCM.COBEM2023.COB2023-1447

The Effects of Controlled Graphene Addition on Stereolithography-produced Materials

Submission Author: Matheus Klement , SC
Co-Authors: Matheus Klement, Rafael Perottoni, Natalia Daudt, Alexandre Aparecido Buenos, Juliana Rosemara Felisberto da Silva
Presenter: Matheus Klement

doi://10.26678/ABCM.COBEM2023.COB2023-1631

Manufacturing Management 3

Multi-Objective Genetic Algorithm Optimization to Examine the Durability of Cutting Tools with NASA Milling Dataset

Submission Author: Danilo dos Santos Oliveira , DF
Co-Authors: Danilo dos Santos Oliveira, jackson paz bizerra de souza, Priscila Morais, Rhander Viana, Alberto Alvares
Presenter: Danilo dos Santos Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0234

Analysis of methods for calculating the internal radius of air-bending process and his influence on punch displacement

Submission Author: Pedro Kucarz , PR
Co-Authors: Pedro Kucarz, Milton Polli, Walter Luís Mikos, Paulo Victor Prestes Marcondes
Presenter: Pedro Kucarz

doi://10.26678/ABCM.COBEM2023.COB2023-0258

COMPARATIVE STUDY OF THE TECHNICAL AND ECONOMIC FEASIBILITY BETWEEN ABLATIVE MATERIALS AND SPECIAL ALLOYS APPLIED IN THE ROCKET ENGINE.

Submission Author: Willem Nascimento , SE
Co-Authors: Willem Nascimento, Luiz Claudio Pardini
Presenter: Willem Nascimento

doi://10.26678/ABCM.COBEM2023.COB2023-2313

Materials Characterization and Processing 55

ADVANCING ABRADABLE EVALUATION: A COMPREHENSIVE REVIEW AND DEVELOPMENT OF AN INNOVATIVE COST-EFFECTIVE METHODOLOGY

Submission Author: Kaue Bertuol , Quebec
Co-Authors: Kaue Bertuol, Pantcho Stoyanov
Presenter: Kaue Bertuol

doi://10.26678/ABCM.COBEM2023.COB2023-0143

Evaluation of "micro-cladding" parameters in face of thermal effects reduction for top-hat lasers

Submission Author: Joares Reis , SP
Co-Authors: Joares Reis, Paulo Dyer, Silvelene Silva, Helder Vicente, Andersan dos Santos Paula, Danilo Gonçalves, Naiara Vieira Le Sénéchal, Getúlio Vasconcelos
Presenter: Paulo Dyer

doi://10.26678/ABCM.COBEM2023.COB2023-2231

SUPERELASTIC TUBULAR STRUCTURES OF CU-AL-MN SHAPE MEMORY ALLOY OBTAINED BY INVESTMENT CASTING: A PRELIMINARY STUDY USING 3D PRINTED ABS MODELS

Submission Author: Railson de Medeiros Nóbrega Alves , PB
Co-Authors: Railson de Medeiros Nóbrega Alves, Leonardo Feitosa Jordão, RODINEI MEDEIROS GOMES, Danielle Cavalcante, Carlos Jose de Araujo
Presenter: Carlos Jose de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-0160

INVESTIGATION OF THE CAVITATION PHENOMENON IN THE MECHANICAL AND METALLURGICAL PROPERTIES IN THE ROTOR OF THE FRANCIS TYPE TURBINE MADE OF STAINLESS STEEL ASTM A743 GR CF20

Submission Author: Cristian Meinhardt , RS
Co-Authors: Carlos Eduardo da Silva Moreira, Cristian Meinhardt, Lecino Caldeira, Matheus José Cunha De Oliveira, Paula Silvestre
Presenter: Carlos Eduardo da Silva Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-2115

Plasma-assisted and furnace pyrolyzed polysilazane-based CrSiCN composite coating system – a comparison

Submission Author: Daniel Auri Schaefer , SC
Co-Authors: Daniel Auri Schaefer, Tatiana Bendo, Aloisio Nelmo Klein
Presenter: Daniel Auri Schaefer

doi://10.26678/ABCM.COBEM2023.COB2023-0155

NON-DESTRUCTIVE TESTING (NDT) FOR INDUSTRIAL APPLICATIONS – SYSTEMATIC APPROACH TO IMPLEMENTATION, OPPORTUNITIES AND LIMITATIONS OF NOVEL NDT METHODS, NEW TRENDS

Submission Author: Ulrike Siemer , Germany
Co-Authors: Ralf Förster, Tiago Borsoi Klein
Presenter: Ulrike Siemer

doi://10.26678/ABCM.COBEM2023.COB2023-2386

Assessment of electric field assisted mining of lanthanum from soils

Submission Author: Carolina Mocelin Gomes Pires , PR
Co-Authors: Carolina Mocelin Gomes Pires, Alexandra Ribeiro, Maria José Jerônimo de Santana Ponte, Haroldo Ponte
Presenter: Carolina Mocelin Gomes Pires

doi://10.26678/ABCM.COBEM2023.COB2023-2391

Experimental analysis of residual stress relief by mechanical vibration in resistance spot welding

Submission Author: Paola Rodrigues Pereira , RJ
Co-Authors: Paola Rodrigues Pereira, Hector Costa, DANIEL CASTELLO, Maria Cindra Fonseca
Presenter: Paola Rodrigues Pereira

doi://10.26678/ABCM.COBEM2023.COB2023-1775

INFLUENCE OF PRINTING PARAMETERS AND MEAN STRESS ON THE FATIGUE BEHAVIOR OF ABS SAMPLES OBTAINED BY FFF

Submission Author: Vinícius Hiroshi Souza Miwa , SP
Co-Authors: Vinícius Hiroshi Souza Miwa, Angélica Oliveira de Barcelos , Manuel Barcelos Júnior, Sergio Henrique da Silva Carneiro, Daniel Fernandes da Cunha
Presenter: Vinícius Hiroshi Souza Miwa

doi://10.26678/ABCM.COBEM2023.COB2023-1487

Adhesion of Magnetron Sputtering coatings on Acrylonitrile Butadiene Styrene: a systematic review

Submission Author: Thiago de Lima Gontarski , PR
Co-Authors: Thiago de Lima Gontarski, Ricardo Torres, Paulo Soares
Presenter: Thiago de Lima Gontarski

doi://10.26678/ABCM.COBEM2023.COB2023-1079

STRUCTURAL CHARACTERISTICS AND PROPERTIES OF POLYMERIC COMPOUNDS REINFORCED WITH POLYPROPYLENE MICROFIBER AND GRAPHENE OXIDE (GO)

Submission Author: Thalyson Oliveira , GO
Co-Authors: Thalyson Oliveira, Maria del Pilar Hidalgo Falla
Presenter: Thalyson Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0882

Characterization of Residues Arising from Sustainable Hydrogen Generation via Metal-Mediated Reactions.

Submission Author: Beatriz Jacob Furlan , PR
Co-Authors: Beatriz Jacob Furlan, Paulo Alexandre Silveira da Silva, Lauber Martins, Rafael Silva Ribeiro Gonçalves, Matheus Ben-Hur Ramirez Sapucaia, Lucio Cardozo-Filho, JOSÉ VIRIATO COELHO VARGAS
Presenter: Beatriz Jacob Furlan

doi://10.26678/ABCM.COBEM2023.COB2023-1745

EVALUATION OF THE APPLICATION OF BORON-BASED COATINGS ON AISI 1020 STEEL BY SMAW

Submission Author: Edilson Pollnow , RS
Co-Authors: Edilson Pollnow, Alan Artigas Barbosa , Hugo Silva Comisso
Presenter: Edilson Pollnow

doi://10.26678/ABCM.COBEM2023.COB2023-2274

CHARACTERIZATION OF THE AA6082 MATRIX COMPOSITE WITH NBC OBTAINED THROUGH FRICTION STIR PROCESSING

Submission Author: Hipolito Domingo Carvajal Fals , PR
Co-Authors: Denner Traiano, Bruno Edu Arendarchuck, Simone do Rocio Ferraz Sabino, Luciano Lourençato, Hipolito Domingo Carvajal Fals
Presenter: Denner Traiano

doi://10.26678/ABCM.COBEM2023.COB2023-1878

Surface Characterization of Copper-based Bactericidal Sealant for Additive Manufactured Personal Protective Equipment

Submission Author: Daniel Chalhub , RJ
Co-Authors: Fernanda Torres, Norberto Mangiavacchi, Marilia Diniz, Alex Reis, Daniel Chalhub, Daniel Chalhub, Leandro De Oliveira Pereira, André Pimenta, Marco Antonio Lemos Miguel
Presenter: Daniel Chalhub

doi://10.26678/ABCM.COBEM2023.COB2023-0235

Investigations on enhanced hardening of CuNi electrodeposited coatings obtained in the presence of micro-Al2O3 particles in a citrate-ammonia solution pH 9.2.

Submission Author: Paulo Cezar Tulio , PR
Co-Authors: Paulo Cezar Tulio, Raphael Souza
Presenter: Paulo Cezar Tulio

doi://10.26678/ABCM.COBEM2023.COB2023-0361

MECHANICAL PROPERTIES OF POLYLACTIC ACID USED IN COMPONENTS MANUFACTURED IN 3D PRINTING

Submission Author: Geice Paula Villibor , MG
Co-Authors: Luíza Albuquerque, Geice Paula Villibor, Pedro Rodrigues, Joseph Kalil Khoury Junior
Presenter: Geice Paula Villibor

doi://10.26678/ABCM.COBEM2023.COB2023-2156

Thermomechanical characterization of a Cu-Al-Mn shape memory alloy processed by investment casting

Submission Author: Railson de Medeiros Nóbrega Alves , PB
Co-Authors: Railson de Medeiros Nóbrega Alves, Paulo César Sales da Silva, RODINEI MEDEIROS GOMES, Danielle Cavalcante, Carlos Jose de Araujo
Presenter: Carlos Jose de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-0242

Effect of pre-placed powders of graphene and graphite on dilution and hardness of Stellite 6 coatings processed by PTA

Submission Author: João Felipe Sippel , PR
Co-Authors: João Felipe Sippel, Willian Oliveira , Juliane Ribeiro da Cruz Alves, Ana Sofia D'Oliveira
Presenter: João Felipe Sippel

doi://10.26678/ABCM.COBEM2023.COB2023-1900

Synthesis and characterization of the high-entropy alloy CrMnFeCoNi obtained by mechanical alloying

Submission Author: Athos Fernandes Araujo , SC
Co-Authors: Felipe Martina André, Claudio Poffo, Daniel Cunha, Athos Fernandes Araujo, Catarina Meiko Hayashi
Presenter: Athos Fernandes Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-2406

Influence of incremental sheet forming parameters on the roughness of AISI 304 and 2205 stainless steels

Submission Author: Sara Silva Ferreira de Dafé , MG
Co-Authors: João Victor Marzinetti Cunha, Estefany de Almeida Freitas, Guilherme Lobo Rocha, Sara Silva Ferreira de Dafé
Presenter: João Victor Marzinetti Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0164

Silicon-titanium codeposition on niobium: properties and behavior at high temperatures

Submission Author: Beatriz Aparecida Pinto , PR
Co-Authors: Beatriz Aparecida Pinto, Ana Sofia D'Oliveira, Helga Holzmann
Presenter: Beatriz Aparecida Pinto

doi://10.26678/ABCM.COBEM2023.COB2023-2310

Effects of the solid carburizing with babassu coconut (Orbignya phalerata) on the microstructure and mechanical properties on low carbon steels

Submission Author: Denilson Monteiro , SP
Co-Authors: Denilson Monteiro, Sóstenes Pinheiro Campos, Rodrigo da Silva Miranda, Paulo Roberto Campos Flexa Ribeiro Filho, Adilto Cunha
Presenter: Adilto Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0716

Material selection for optimization of a radio-controlled aircraft spar using sandwich-type hybrid composites.

Submission Author: Jeissiany Regonini Schineider , ES
Co-Authors: Jeissiany Regonini Schineider, Ayrton Cavallini Zotelle
Presenter: Jeissiany Regonini Schineider

doi://10.26678/ABCM.COBEM2023.COB2023-1002

Metal powder production by rotating electrode using laser

Submission Author: Manoel Kolling Dutra , SC
Co-Authors: Gustavo Silva, Arthur Lopes Dal Mago, Frederico Narciso, Manoel Kolling Dutra, Claudio Abilio da Silveira, Milton Pereira
Presenter: Gustavo Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1080

MANUFACTURING AND CHARACTERIZATION OF A CERAMIC COMPOSITE Al2O3-ZrO2-SiCw SINTERED BY PECS

Submission Author: Luma Gonçalves Fraga , ES
Co-Authors: Luma Gonçalves Fraga, Izabel Machado, Marcelo Bertolete
Presenter: Marcelo Bertolete

doi://10.26678/ABCM.COBEM2023.COB2023-1024

Production and characterization of zirconia-alumina ceramic composites, reinforced with rare earth oxides (Y2O3 and La2O3), for application as TBC in the exhaust nozzles of gas turbines

Submission Author: Bruna Amorim Lima Advincula da Rocha , PE
Co-Authors: Bruna Amorim Lima Advincula da Rocha, Renata Domingues, Yogendra Prasad Yadava
Presenter: Yogendra Prasad Yadava

doi://10.26678/ABCM.COBEM2023.COB2023-2269

Effect of process parameters on the properties and microstructures of CrMnFeCoNi coatings produced by laser cladding

Submission Author: Athos Fernandes Araujo , SC
Co-Authors: Athos Fernandes Araujo, Claudio Poffo, Daniel Cunha, Catarina Meiko Hayashi, Felipe Martina André, Renan Luiz Santiago, Manoel Kolling Dutra, Milton Pereira
Presenter: Athos Fernandes Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-1744

Study of Acoustic Emissions in Electrical Discharge Machining with Copper and Graphite Electrodes

Submission Author: Samuel Ferreira , MG
Co-Authors: Samuel Ferreira, Luis Henrique Andrade Maia, Mariana de Paula Souza, Leonel Abreu Dimas, fred lacerda amorim
Presenter: Mariana de Paula Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0480

MICROSTRUCTURAL AND MECHANICAL CHARACTERIZATIONS OF THE BRONZE ALLOY CUSN8ZN4PB1 COMMONLY USED IN BEARINGS

Submission Author: Carlos Damião de Souza , SP
Co-Authors: Carlos Damião de Souza, Vinicius Torres dos Santos, Flávia Gonçalves Lobo, Marcio Silva, Caique Movio Pereira de Souza, Rene Oliveira, Vanessa Seriacopi, Wilson Carlos Silva Junior
Presenter: Carlos Damião de Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0356

Comparative Analysis of Proton Exchange Membranes and Anion Exchange Membranes for Low-Temperature Fuel Cells

Submission Author: Fábio Furtado , PR
Co-Authors: Fábio Furtado, Matheus Ben-Hur Ramirez Sapucaia, Beatriz Jacob Furlan, Rodrigo César Raimundo, JOSÉ VIRIATO COELHO VARGAS, Thais Helena Sydenstricker Flores-Sahagun
Presenter: Fábio Furtado

doi://10.26678/ABCM.COBEM2023.COB2023-1828

OBTAINING AND MECHANICAL CHARACTERIZATION OF FILMS BASED ON STARCH BLENDS, CHITOSAN AND SODIUM ALGINATE

Submission Author: Francielle Cristine Gonçalves , PB
Co-Authors: Francielle Cristine Gonçalves, Kelly Cristiane Gomes, Manoel Quirino Silva Júnior, Thaís Almeida, Ricardo Leite
Presenter: Francielle Cristine Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1889

Influence of TiO2 nanoparticle addition on submerged arc welding processes on carbon steel

Submission Author: Maria Fernanda Coimbra Forcellini , SC
Co-Authors: Maria Fernanda Coimbra Forcellini, Tiago Vieira da Cunha, LUIZ ELOI VIEIRA JUNIOR, Danielle Bond
Presenter: Maria Fernanda Coimbra Forcellini

doi://10.26678/ABCM.COBEM2023.COB2023-1995

Powder metallurgical manufacturing of Graphene reinforced titanium composites

Submission Author: Fernanda Signor , RS
Co-Authors: Fernanda Signor, Gabriela Emanuelle Valeriano Soares de Souza, Sérgio Noal Alves, Maurício Zubaran, Paulo Mareze, Natalia Daudt
Presenter: Fernanda Signor

doi://10.26678/ABCM.COBEM2023.COB2023-2149

Evaluation of recovery and recrystallization induced by heat treatment in deformed railway steel microstructures.

Submission Author: Igor Ferreira Passinho Silva , MA
Co-Authors: Igor Ferreira Passinho Silva, Andrei Bavaresco Rezende
Presenter: Igor Ferreira Passinho Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2209

Manufacturing highly porous Ti alloys by molten salt sintering

Submission Author: Sérgio Noal Alves , RS
Co-Authors: Sérgio Noal Alves, Maria José Silva Carvalho, Fernanda Signor, Paulo Mareze, Natalia Daudt
Presenter: Sérgio Noal Alves

doi://10.26678/ABCM.COBEM2023.COB2023-1537

Using FCUB function in CNC programming to mitigate failures in drilling process with gun drills

Submission Author: Marcus Vendrusculo , PR
Co-Authors: Milton Polli, Marcus Vendrusculo
Presenter: Marcus Vendrusculo

doi://10.26678/ABCM.COBEM2023.COB2023-2370

Comparison of methods for assessing material properties from spherical indentation test on three types of steel

Submission Author: Saint Clair Alves Naves , MG
Co-Authors: Saint Clair Alves Naves, Henry Hwang, Luiz Fernando Maia de Almeida, Luciano José Arantes, Pedro Augusto Queiroz de Assis
Presenter: Luciano José Arantes

doi://10.26678/ABCM.COBEM2023.COB2023-0128

Influence of curvature on residual stress measurement by X-ray diffraction at the gear tooth root

Submission Author: João Pedro Vieira , SP
Co-Authors: João Pedro Vieira, Matheus Santos, Tiago Colombo, Ronnie Rego
Presenter: João Pedro Vieira

doi://10.26678/ABCM.COBEM2023.COB2023-0618

Mechanical analysis of fiberglass-reinforced polyester composites artificially and naturally aged.

Submission Author: MARIA GUERRA , PR
Co-Authors: MARIA GUERRA, Lucas Freitas Berti
Presenter: MARIA GUERRA

doi://10.26678/ABCM.COBEM2023.COB2023-2273

Manufacturing of micro-scale Nd-Fe-B magnets by diamond wire sawing and electropolishing processes

Submission Author: Erick Cardoso Costa , SC
Co-Authors: Natalie Souza Heinz, Erick Cardoso Costa, Fabio Antonio Xavier
Presenter: Erick Cardoso Costa

doi://10.26678/ABCM.COBEM2023.COB2023-0042

EVALUATION OF FRICTION MATERIAL USED IN BRAKE PADS AND LININGS THROUGH DMA TESTS

Submission Author: Juliana Favero , RS
Co-Authors: Juliana Favero, Roberta Motta Neves, Daniel Matté, Diego Antunes, Rogério Marczak
Presenter: Juliana Favero

doi://10.26678/ABCM.COBEM2023.COB2023-1983

Computer vision and three dimensional profilometry applied to corrosion detection in deep rolled AISI 1045 steel.

Submission Author: Vinicius Melo Cangussu , MG
Co-Authors: Gabriel Vieira, Vinicius Melo Cangussu, Alexandre Abrao
Presenter: Vinicius Melo Cangussu

doi://10.26678/ABCM.COBEM2023.COB2023-0617

COMPARATIVE STUDY OF THE RESIDUAL STRESS INDUCED BY LASER SURFACE HARDENING OF AISI 1020 AND AISI 4130 STEELS

Submission Author: Olga Liskevych , ES
Co-Authors: Ana Sofia Andreão, Gabriela Rocha Profilo, SHEILA DE CARVALHO, Olga Liskevych
Presenter: SHEILA DE CARVALHO

doi://10.26678/ABCM.COBEM2023.COB2023-0701

Parameterization of laser cladding process with WC and H13 in considering dilution aspects

Submission Author: Paulo Dyer , SP
Co-Authors: Paulo Dyer, Silvelene Silva, Andersan dos Santos Paula, Rafael Ramos, Maria Margareth da Silva, Getúlio Vasconcelos
Presenter: Paulo Dyer

doi://10.26678/ABCM.COBEM2023.COB2023-2131

High-entropy Alloy CrMnFeNiCu: A Thermal and Structural Characterization Study

Submission Author: Athos Fernandes Araujo , SC
Co-Authors: Catarina Meiko Hayashi, Daniel Cunha, Manoel Kolling Dutra, Francielen Pujol Nobre , Athos Fernandes Araujo, Felipe Martina André, Claudio Poffo
Presenter: Athos Fernandes Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-2405

USE OF NON-DESTRUCTIVE TESTING (NDT) METHODS FOR THE CHARACTERIZATION OF NOVEL SUSTAINABLE COMPOSITES AND JOINTS IN RENEWABLE RAW MATERIALS

Submission Author: Ulrike Siemer , Germany
Co-Authors: Ralf Förster, Tiago Borsoi Klein
Presenter: Ulrike Siemer

doi://10.26678/ABCM.COBEM2023.COB2023-2387

DEVELOPMENT OF CO2 SORBENTS DOPED WITH RICE HUSK ASH APPLIED TO CALCIUM LOOPING

Submission Author: Murilo Silva , SP
Co-Authors: Murilo Silva, Robson Rocha Oliveira, Carlos Manuel Romero Luna, José Caraschi, Gretta Larisa Aurora Arce Ferrufino, Mérilin Cristina dos Santos Fernandes, Cristiane Campos, Nicole Musielak, Nerio Arce Ferrufino
Presenter: Murilo Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0794

Influence on the use of kerosene and propane as fuels on characteristics of in-flight particles deposited by thermal spray HVOF

Submission Author: Sarah Anabele Silva , PR
Co-Authors: Sarah Anabele Silva, Gustavo Bavaresco Sucharski, Anderson Geraldo Marenda Pukasiewicz, Irene Siqueira, Igor Zanella, Pedro Polato Bites Costa, Ramón Sigifredo Cortés Paredes
Presenter: Sarah Anabele Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0763

A SUSTAINABLE APROACH BY USING 3D PRINTING POLYLACTIC ACID PLA RESIDUES AS MATRIX OF GRAPHENE NANOCOMPOSITE

Submission Author: Gabriel da Cunha Cotrim , DF
Co-Authors: Gabriel da Cunha Cotrim, Maria del Pilar Hidalgo Falla, Sandra Luz
Presenter: Gabriel da Cunha Cotrim

doi://10.26678/ABCM.COBEM2023.COB2023-0903

METAL POWDER PRODUCTION ROUTES FOR ADDITIVE MANUFACTURING AND THEIR IMPACT ON PROCESS AND QUALITY: A REVIEW

Submission Author: Rodrigo Coelho , BA
Co-Authors: Bruna Callegari, Bruno Caetano dos Santos Silva, Gilmar Batalha, Rodrigo Coelho
Presenter: Bruna Callegari

doi://10.26678/ABCM.COBEM2023.COB2023-2108

Study of the influence of processing parameters on the mechanical properties of Polyamide 66 and glass fiber composites obtained by the injection molding process

Submission Author: Maurício Baesso , SC
Co-Authors: Maurício Baesso, Matheus Hromatka, Arthur Mendonça, Diego Salvaro, Cristiano Binder, Vanessa Oliveira Castro, Claudia Merlini
Presenter: Maurício Baesso

doi://10.26678/ABCM.COBEM2023.COB2023-2118

A literature review on additive manufacturing of ceramic parts produced by paste extrusion

Submission Author: Luigi Roehrig Segala , PR
Co-Authors: Luigi Roehrig Segala, Gustavo Xavier Peres, Sergio Lucas Santos Rocha, Luciano Zart Olanyk, Lucas Freitas Berti, Neri Volpato
Presenter: Gustavo Xavier Peres

doi://10.26678/ABCM.COBEM2023.COB2023-1236

Microstructural characterization and evaluation of corrosion resistance in stainless steel applied in the pulp and paper industry

Submission Author: Matheus Alves Lima , Buscando endereço...
Co-Authors: Matheus Alves Lima, Beatriz Garcia Bossatto , Davi Pereira Garcia, Felipe Malheiros, Henrique Bolonha, Warlen Alves Monfardini
Presenter: Matheus Alves Lima

doi://10.26678/ABCM.COBEM2023.COB2023-2175

Application of Ashby's Methodology for Material Selection of an SAE Aerodesign Landing Gear

Submission Author: Helner Mascarenhas dos Santos , PA
Co-Authors: Helner Mascarenhas dos Santos , Leonardo Tavares, Felipe Diniz, Sávio de Oliveira Moreira, Arthur Wylson Cecim Negrão, Ana Paula Mattos
Presenter: Helner Mascarenhas dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1908

Metallurgical Processes 10

APPLICATION OF MICROWAVE HYBRID HEATING FOR PACK CHROMIZING OF THE AISI M2 TOOL STEEL

Submission Author: Vitor Silveira Rolin , SP
Co-Authors: Vitor Silveira Rolin, Luciana Takahashi, Juno Gallego
Presenter: Vitor Silveira Rolin

doi://10.26678/ABCM.COBEM2023.COB2023-0513

Application of computational thermodynamics tool in the simulation of pyrometallurgical operations of lead-acid battery recycling

Submission Author: Leonardo Henrique Gomes , PR
Co-Authors: Leonardo Henrique Gomes, Maria José Jerônimo de Santana Ponte, Haroldo Ponte, Wagner Viana Bielefeldt, Elan Forteski, Rodrigo Helleis, Fabricio Torres Borghi
Presenter: Leonardo Henrique Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-1950

ANALYSIS OF THE INFLUENCE OF GTAW WELDING PARAMETERS ON THE MICRO HARDNESS OF DUPLEX STAINLESS STEEL UNS S31803

Submission Author: Pedro Eduardo Machado Zortéa , ES
Co-Authors: Pedro Eduardo Machado Zortéa, Rodrigo Soares dos Santos, erijanio Silva
Presenter: Pedro Eduardo Machado Zortéa

doi://10.26678/ABCM.COBEM2023.COB2023-1971

The use of Thermography In the Detection of Breakage in Steel: Failure prevention in the tension process

Submission Author: Carlos Vicari , PR
Co-Authors: Carlos Vicari, Paulo Victor Prestes Marcondes, Pablo Deivid Valle, Maria Lucia Okimoto, Bruno Ferrari de Almeida Prado, Samuel Cavalli Kluthcovsky
Presenter: Carlos Vicari

doi://10.26678/ABCM.COBEM2023.COB2023-0282

Parametrization of GMAW Welding With Switchback Technique Using Mechanized Movement System

Submission Author: Rodrigo Oliveira de Sousa , PA
Co-Authors: Rodrigo Oliveira de Sousa, Thiago Farias, João Pamplona, Carlos Mota
Presenter: Rodrigo Oliveira de Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-1922

The Influence of Deformation in the Sheet Thickness Direction to Obtain the Forming Speed in DP600 Steel

Submission Author: Márcio Madi , PR
Co-Authors: Márcio Madi, Luiz Mauricio V. Tigrinho, Rogerio Gomes, Wagner Chiesorin Uhlmann
Presenter: Márcio Madi

doi://10.26678/ABCM.COBEM2023.COB2023-0158

Forces analysis of single point incremental sheet metal forming by variation process parameters

Submission Author: Jordana Ferreira Rezio , GO
Co-Authors: Jordana Ferreira Rezio, Larissa Oliveira, Ecio Duarte, Paulo Vinicius Resende, Davi Judá De Souza Fraga
Presenter: Davi Judá De Souza Fraga

doi://10.26678/ABCM.COBEM2023.COB2023-1798

DESIGN OF THE FILLING AND FEEDING SYSTEM OF GRAY CAST IRON PARTS THROUGH NUMERICAL SIMULATION

Submission Author: Carlos Enrique Niño , SC
Co-Authors: Thayse Francielle Peralta, Carlos Enrique Niño, Cleimar Del monego Ferreira
Presenter: Thayse Francielle Peralta

doi://10.26678/ABCM.COBEM2023.COB2023-2389

Influence of mixing variation on the macro and microstructure of 316L-Si stainless steel deposits obtained by GMAW

Submission Author: Anderson Eduardo De Salles Oliveira , PB
Co-Authors: Anderson Eduardo De Salles Oliveira, Raquel Calado, Joyce Ingrid Venceslau de Souto, Jefferson Segundo de Lima
Presenter: Anderson Eduardo De Salles Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-1180

INTEGRATION OF FEM TO DETERMINE THE MICROSTRUCTURE AND FORMABILITY OF A CONTINUOUS COOLING BAINITIC STEEL

Submission Author: Thiago Ivaniski , RS
Co-Authors: Alexandre da Silva Rocha
Presenter: Thiago Ivaniski

doi://10.26678/ABCM.COBEM2023.COB2023-2428

Metrology, Inspection, and Quality Control 9

DETERMINATION OF RADIAL GRINDING WHEEL WEAR BY ACOUSTIC EMISSION

Submission Author: Santiago Javier Caraguay Correa , SC
Co-Authors: Santiago Javier Caraguay Correa, Christian Caraguay Correa, Adriano Boaron, Fernando Moreira Bordin, Fabio Antonio Xavier
Presenter: Santiago Javier Caraguay Correa

doi://10.26678/ABCM.COBEM2023.COB2023-1558

On the temperature correction in measuring natural gas volumes for household consumers

Submission Author: Lidiane Mendonça Penna Francisco , RJ
Co-Authors: Lidiane Mendonça Penna Francisco, Manoel Antônio da Fonseca Costa Filho
Presenter: Lidiane Mendonça Penna Francisco

doi://10.26678/ABCM.COBEM2023.COB2023-1689

STUDY OF MEASURING INSTRUMENT CAPABILITY THROUGH Cdl* AND Cg COEFFICIENTS AND CONTROL CHARTS

Submission Author: Felipe Roque de Albuquerque Neto , PE
Co-Authors: Felipe Roque de Albuquerque Neto, José Eduardo Ferreira de Oliveira
Presenter: Felipe Roque de Albuquerque Neto

doi://10.26678/ABCM.COBEM2023.COB2023-1876

Semi-supervised machine learning for chatter detection in turning with data augmentation

Submission Author: Ana Julia da Silva de Oliveira , PR
Co-Authors: Ana Julia da Silva de Oliveira, Daniel Awada Elarrat Canto, Giuliana Sardi Venter
Presenter: Ana Julia da Silva de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0853

L-DED CNC machine kinematic and geometric evaluation

Submission Author: Milton Pereira , SC
Co-Authors: Tiago Colvara Faria, Arthur Lopes Dal Mago, Frederico Narciso, Manoel Kolling Dutra, Cassiano Bonin, Milton Pereira
Presenter: Frederico Narciso

doi://10.26678/ABCM.COBEM2023.COB2023-1665

Pre and post welding geometric deviation measurement method in stainless steel 304 welded by FCAW

Submission Author: Alexandre de Oliveira Dias , SP
Co-Authors: Alexandre de Oliveira Dias, Bruno Gabriel Carneiro, Rafael Antônio Pereira Fonseca, RAPHAEL SILVA LINS, Marcilio Alves
Presenter: RAPHAEL SILVA LINS

doi://10.26678/ABCM.COBEM2023.COB2023-1863

ASSESSMENT OF UNCERTAINTY ASSOCIATED WITH YIELD STRENGTH OBTAINED ACCORDING TO ASTM E8/E8M STANDARD

Submission Author: Joyce Antunes da Silva , MG
Co-Authors: Joyce Antunes da Silva, Vitor Nakayama de Araújo Pires Ferreira, Bruno de Oliveira Prado, Rafael de Lima Costa, Luciano José Arantes, Vera Lúcia Donizeti de Sousa FRanco, Waldek Wladimir Bose Filho, Rosenda Arencibia
Presenter: Luciano José Arantes

doi://10.26678/ABCM.COBEM2023.COB2023-2415

A METROLOGICAL CONTRIBUTION TO THE MEASUREMENT OF LATERAL EXPANSION IN CHARPY TESTS

Submission Author: Guilherme Henrique Alves Andrade , MG
Co-Authors: Rodrigo Freitas da Silva Alvarenga, Guilherme Henrique Alves Andrade, João Pedro Cândido José , Rosenda Arencibia, Daniel Correia Freire Ferreira, Luciano José Arantes
Presenter: Luciano José Arantes

doi://10.26678/ABCM.COBEM2023.COB2023-2413

Monitoring the 475ºC Embrittlement by Barkhausen Noise Measurements in a Duplex Stainless Steel

Submission Author: Alisson Alves dos Santos , PB
Co-Authors: Alisson Alves dos Santos, Filipe Fragoso de Abreu, Edgard Silva, Walter Fialho, Michelline Nery Azevedo Lima
Presenter: Alisson Alves dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0876

Processes with Material Removal 27

INVESTIGATION OF THE TOOL-CHIP INTERFACE TEMPERATURE IN CRYOGENIC TURNING OF HARDENED AISI D6 TOOL STEEL

Submission Author: Anderson Clayton Alves de Melo , RN
Co-Authors: EDMILSON DANTAS DE LIMA JUNIOR, Anderson Clayton Alves de Melo, Adilson Oliveira, Julio Milan, Álisson Rocha Machado
Presenter: Anderson Clayton Alves de Melo

doi://10.26678/ABCM.COBEM2023.COB2023-0145

INFLUENCE OF TOOL WEAR ON THE ROUGHNESS OF SPROWN SHAFTS GENERATED BY THE HOBBING PROCESS

Submission Author: Carlos Eduardo Borsoi Rheinheimer Carlos , RS
Co-Authors: Carlos Eduardo Borsoi Rheinheimer Carlos, André João de Souza, Rodrigo Zeilmann
Presenter: Carlos Eduardo Borsoi Rheinheimer Carlos

doi://10.26678/ABCM.COBEM2023.COB2023-0558

THE USE OF EDIBLE VEGETABLE OILS APPLIED VIA MQL TECHNIQUE IN TURNING AISI 1045 STEEL

Submission Author: Raphael Lima de Paiva , PI
Co-Authors: João Vittor Leôncio Machado, George Lucas da Silva Oliveira Soares, Patrick Abreu, Raphael Lima de Paiva
Presenter: Raphael Lima de Paiva

doi://10.26678/ABCM.COBEM2023.COB2023-2207

COMPARATIVE STUDY OF FRONT MILLING OF PEEK AND PEEK-CF30

Submission Author: Carlos Alfredo Gracioli Aita , RS
Co-Authors: Carlos Alfredo Gracioli Aita, Émerson Passari, André João de Souza
Presenter: Carlos Alfredo Gracioli Aita

doi://10.26678/ABCM.COBEM2023.COB2023-1212

Process analysis in the drilling of carbon fiber reinforced composite using different point angles of twisted drills

Submission Author: Emanuele Schneider Callisaya , SP
Co-Authors: Emanuele Schneider Callisaya, Rafael Suguita, Marcel Kondo, Manoel Cleber de Sampaio Alves
Presenter: Emanuele Schneider Callisaya

doi://10.26678/ABCM.COBEM2023.COB2023-1484

OPTIMIZATION OF CUTTING PARAMETERS IN THE FINISH TURNING OF AISI 420 STAINLESS STEEL USING AN ARTIFICIAL NEURAL NETWORK

Submission Author: Émerson Passari , RS
Co-Authors: Émerson Passari, André João de Souza, Herbert Gomes, Carlos Alfredo Gracioli Aita
Presenter: Émerson Passari

doi://10.26678/ABCM.COBEM2023.COB2023-2106

ASSESSMENT OF LUBRICOOLING METHODS ON TOOL LIFE AND SURFACE ROUGHNESS IN ASTM A182 F55 SUPER DUPLEX STAINLESS STEEL TURNING

Submission Author: Gabriel Pinto , RS
Co-Authors: Lourenço Miranda, Gabriel Pinto, Diógenes Barbosa Teles, André João de Souza
Presenter: Gabriel Pinto

doi://10.26678/ABCM.COBEM2023.COB2023-1746

NUMERICAL MODELING OF A ELECTROPLATED DIAMOND WIRE FOR CRYSTALLINE SILICON MACHINING

Submission Author: Erick Cardoso Costa , SC
Co-Authors: Pedro Córdula de Sousa, Erick Cardoso Costa, Fabio Antonio Xavier
Presenter: Pedro Córdula de Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-1780

DEVELOPING A MQL VALVE FOR Ti-6Al-4V ALLOY MILLING WITH DIFFERENT CUTTING OIL AND GRAPHITE MIXING RATIO

Submission Author: Nelson Wilson Paschoalinoto , SP
Co-Authors: Nelson Wilson Paschoalinoto, Jorge Ferrer, Ed Claudio Bordinassi, Vanessa Seriacopi, Adalto de Farias, Marcelo Otavio dos Santos , Gilmar Batalha
Presenter: Ed Claudio Bordinassi

doi://10.26678/ABCM.COBEM2023.COB2023-0316

INFLUENCE OF PROCESSING PARAMETERS ON THE LASER MICROMACHINING AND TEXTURING OF 3Y-TZP COMPACTS DOPED WITH GRAPHITE

Submission Author: Bruno Alexandre Pacheco de Castro Henriques , SC
Co-Authors: Pedro Griebeler Oliveira, Douglas Fabris, Marcio C. Fredel, Bruno Alexandre Pacheco de Castro Henriques, Claudio Abilio da Silveira, Milton Pereira
Presenter: Pedro Griebeler Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-2424

Impact resistance of quenched 1045 steel bars for quick stop equipment in turning operations

Submission Author: Lucas Melo Queiroz Barbosa , MG
Co-Authors: Felipe dos Anjos Rodrigues Campos, Felipe Chagas Rodrigues de Souza, Lucas Melo Queiroz Barbosa, Kauã Ferreira de Almeida, Pedro Henrique Veiga Oliveira, Leonardo Rosa Ribeiro da Silva , Álisson Rocha Machado
Presenter: Lucas Melo Queiroz Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-0502

Influence of Surface Finishing by Grinding and Polishing on the Residual Stresses in S13Cr Steel

Submission Author: Túlio Salek , RJ
Co-Authors: Túlio Salek, Maria Cindra Fonseca
Presenter: Túlio Salek

doi://10.26678/ABCM.COBEM2023.COB2023-2157

A RENEWED CONTEMPORARY ANALYSIS OF CHIP FORMATION FREQUENCY ON LATHE OPERATION OF SAE 4340

Submission Author: Marcelo Acacio De Luca Rodrigues , SP
Co-Authors: Marcelo Acacio De Luca Rodrigues, Bruno Fernandes de Holanda
Presenter: Marcelo Acacio De Luca Rodrigues

doi://10.26678/ABCM.COBEM2023.COB2023-0691

Analysis of the machining forces and vibrations in turning with grooving tools

Submission Author: Milton Polli , PR
Co-Authors: Amarildo Alves Dias, Milton Polli, Bruno Edson Klipstein
Presenter: Bruno Edson Klipstein

doi://10.26678/ABCM.COBEM2023.COB2023-2364

Study of Electrical Energy Consumption in Milling Surfaces Under Different Machining Conditions

Submission Author: Joao Carlos Espindola Ferreira , SC
Co-Authors: Raphael Xavier, Joao Carlos Espindola Ferreira, Adriano Adriano Fagali de Souza
Presenter: Joao Carlos Espindola Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-1632

Machinability Evaluation of Free-Cutting Steels with Bismuth Additions by Constant Pressure Test in Drilling Process

Submission Author: João Paulo Alves , ES
Co-Authors: João Paulo Alves, Eduardo Sigler Junior, João Batista Ribeiro Martins , Mariane Gonçalves de Miranda, Marcelo Bertolete, Patrícia Alves Barbosa
Presenter: Marcelo Bertolete

doi://10.26678/ABCM.COBEM2023.COB2023-0944

INVESTIGATION OF THE EFFECT OF HELIX ANGLE VARIATION ON INTERNAL THREADING

Submission Author: RAPHAEL SILVA LINS , MG
Co-Authors: RAPHAEL SILVA LINS, Paulo Sergio Martins, Marcio Bacci Da Silva
Presenter: RAPHAEL SILVA LINS

doi://10.26678/ABCM.COBEM2023.COB2023-0065

INFLUENCE OF COMPRESSED COLD AIR COOLING IN MILLING PROCESS WITH BARREL END MILL ON THE HARDENED STEEL

Submission Author: Alexandre Venturi , SC
Co-Authors: Alexandre Venturi, Milton Polli, Gil Magno Portal Chagas
Presenter: Alexandre Venturi

doi://10.26678/ABCM.COBEM2023.COB2023-0929

Study of Residual Stresses in Machined Parts with Different Machining Strategies of AISI 6351 Aluminum Alloy.

Submission Author: Dante Ricardo Ambrosio , SP
Co-Authors: Dante Ricardo Ambrosio, Talita Gama de Sousa, Thaissa Sampaio Nunes
Presenter: Dante Ricardo Ambrosio

doi://10.26678/ABCM.COBEM2023.COB2023-2083

Beyond Traditional Machining: An Eco-friendly Assessment of ABNT 1045 Steel Surface Integrity using Environmentally Sustainable Cutting Fluids

Submission Author: Matheus Buzo , PR
Co-Authors: Matheus Buzo, Juan Manoel da Silva Blanes, José Aécio Gomes de Sousa, Luiz Leroy Thomé Vaughan, Antônio Santos Araújo Junior
Presenter: Matheus Buzo

doi://10.26678/ABCM.COBEM2023.COB2023-1710

ALGORITHM DEVELOPMENT FOR TOOL PATH GENERATION AND PARAMETERS VARIATION IN LASER MICROMACHINING PROCESSES

Submission Author: Milton Pereira , SC
Co-Authors: Antonio Carlos Haidamus Monteiro Filho, João Henrique Telles de Carvalho, Manoel Kolling Dutra, Claudio Abilio da Silveira, Milton Pereira
Presenter: Antonio Carlos Haidamus Monteiro Filho

doi://10.26678/ABCM.COBEM2023.COB2023-2426

DETERMINATION OF THE MATERIAL REMOVAL RATE ON A-36 STEEL USING A 1064 µm NANOSECOND PULSED FIBER LASER

Submission Author: Santiago Javier Caraguay Correa , SC
Co-Authors: Santiago Javier Caraguay Correa, Thiago Soares Pereira, Francisco Ratusznei, Miriam Parra, Christian Caraguay Correa, Milton Pereira, Fabio Antonio Xavier
Presenter: Santiago Javier Caraguay Correa

doi://10.26678/ABCM.COBEM2023.COB2023-0755

EFFECT OF CUTTING FLUID ON SURFACE FINISH OF 316L DURING MILLING FROM PIECES OBTAINED FROM ADDITIVE MANUFACTURING AND ROLLING PROCESS

Submission Author: Ed Claudio Bordinassi , SP
Co-Authors: Ed Claudio Bordinassi, Vanessa Seriacopi, Nelson Wilson Paschoalinoto, Marcelo Otavio dos Santos , Adalto de Farias, SERGIO LUIS RABELO DE ALMEIDA
Presenter: Ed Claudio Bordinassi

doi://10.26678/ABCM.COBEM2023.COB2023-0207

Investigation of the Influence of Milling Process Parameters on the Quality of Carbon Fiber Reinforced Polymer Parts

Submission Author: Tedni de Abreu Goulart , SP
Co-Authors: Tedni de Abreu Goulart, jefferson de oliveira gomes, Eckart Uhlmann, Julian Polte, Tobias Neuwald
Presenter: Tedni de Abreu Goulart

doi://10.26678/ABCM.COBEM2023.COB2023-2124

Development of viscoelastic dynamic neutralizer to minimize the amplification of regenerative vibrations in simultaneous turning

Submission Author: Bruno Edson Klipstein , SC
Co-Authors: Bruno Edson Klipstein, Milton Polli, Carlos Alberto Bavastri, Vinicius Sell Goncalves
Presenter: Bruno Edson Klipstein

doi://10.26678/ABCM.COBEM2023.COB2023-0264

MODELING AND SIMULATION OF THERMAL EFFECTS IN CYLINDRICAL PLUNGE DRY GRINDING WITH PRECOOLING

Submission Author: Eraldo Jannone da Silva , SP
Co-Authors: Ézio Carvalho de Santana, Eraldo Jannone da Silva, Gabriel Urbano
Presenter: Ézio Carvalho de Santana

doi://10.26678/ABCM.COBEM2023.COB2023-2374

CONTRIBUTION TO THE STUDY OF ROUGHNESS AND ELECTRICAL POWER IN THE GRINDING OF STAINLESS STEEL USED FOR MOLDS AND DIES

Submission Author: Marcus Vinicius de Oliveira , MG
Co-Authors: Marcus Vinicius de Oliveira, Elhadji Ba, Bruno Souza Abrão, Amanda Souza Abrão, Alcione Reis, Mark Jackson, Rosemar Batista da Silva
Presenter: Rosemar Batista da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2067

Tribology 7

Tribological evaluation of naphthenic base oils using four ball tester

Submission Author: Paulo Roberto Campos Flexa Ribeiro Filho , MA
Co-Authors: Denilson Monteiro, Adilto Cunha, Lourival Filho, Paulo Roberto Campos Flexa Ribeiro Filho
Presenter: Denilson Monteiro

doi://10.26678/ABCM.COBEM2023.COB2023-0517

Tribological assessment of carbon nanotubes films produced by plasma-enhanced chemical vapour deposition: a comparison between dry and wet conditions

Submission Author: Tainan Andrioni , SC
Co-Authors: Tainan Andrioni, Cristiano Binder, Tatiana Bendo, Thiago de Souza Lamim
Presenter: Tainan Andrioni

doi://10.26678/ABCM.COBEM2023.COB2023-0928

HVOF-SPRAYED COATING AGAINST WEAR OF SLURRY PUMP ROTORS AND TAILINGS FOR THE COAL MINING INDUSTRY

Submission Author: Elvys Isaias Mercado Curi , SC
Co-Authors: Milton Pereira, Richard de Medeiros Castro, Fábio Peruch, Vitor Gustavo Alves
Presenter: Vitor Gustavo Alves

doi://10.26678/ABCM.COBEM2023.COB2023-2383

Experimental Investigation of HVOF and Polymeric Coatings for Turbine Blade Protection

Submission Author: Fernando Moreira Bordin , SC
Co-Authors: Fabio Antonio Xavier, Carlos Enrique Niño, Rodrigo Bastos Fernandes, Leandro Luiz Silva, Waldson Bezerra, Fernando Moreira Bordin, Erick Cardoso Costa, Miguel Barcelos, Beatriz Santos
Presenter: Fabio Antonio Xavier

doi://10.26678/ABCM.COBEM2023.COB2023-1754

Sustainable use of Aloe vera oil against corrosion in copper-containing refrigeration systems

Submission Author: Marcos Paulo Simões Barbosa , MA
Co-Authors: Marcos Paulo Simões Barbosa, CARMEM NASCIMENTO, Ronaldo Silva Paixão, Waldemir Passos Martins, Valter Alves de Meneses
Presenter: Marcos Paulo Simões Barbosa

doi://10.26678/ABCM.COBEM2023.COB2023-0225

Coaxial Laser Cladding of Tribaloy T800™ Alloy

Submission Author: Daiana Aparecida Kruchelski da Silva , PR
Co-Authors: Daiana Aparecida Kruchelski da Silva, Robson Reis da Silva, Moises Teixeira, ALEX PIZZATTO, Adriano Scheid
Presenter: Daiana Aparecida Kruchelski da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1021

WEAR RESISTANCE EVALUATION OF THE COATING DIN 8555: MF 10-GF-60-GRZ ON THE HARDOX® 450 STEEL APPLIED IN THE RECOVERY OF MINING TRUCK BODY

Submission Author: Thais Stefany Santiago Brandão , MG
Co-Authors: Thais Stefany Santiago Brandão, Gilmar Cordeiro da Silva, anderson junior dos santos
Presenter: Thais Stefany Santiago Brandão

doi://10.26678/ABCM.COBEM2023.COB2023-0736

Union and Assembly Processes 8

WELD BEAD GEOMETRY PREDICTION USING ARTIFICIAL NEURAL NETWORKS AND GENETIC ALGORITHM HYBRID MODEL IN GMAW

Submission Author: Caio Augusto Mascarenhas Dias Filho , AM
Co-Authors: Caio Augusto Mascarenhas Dias Filho, Marcus Eduardo Nascimento Sena, Dimas Alencar Neves, Sergio Brandi, Rubelmar Maia de Azevedo Cruz Neto
Presenter: João D'Anuzio Lima de Azevedo

doi://10.26678/ABCM.COBEM2023.COB2023-2140

RESIDUAL STRESS EVALUATION IN OVERLAP JOINTS PRODUCED WITH LBW AND GTAW PROCESSES IN AISI 316L STAINLESS STEEL

Submission Author: Olga Liskevych , ES
Co-Authors: SHEILA DE CARVALHO, Olga Liskevych
Presenter: SHEILA DE CARVALHO

doi://10.26678/ABCM.COBEM2023.COB2023-0702

Evaluation of Dissimilar Welds with the Temper-bead Technique Using Electrodes ER 316L and ER NiCrMo-3 on Steel ASTM A182 F22

Submission Author: Larissa Cardoso , PA
Co-Authors: Larissa Cardoso, Humberto Aguirre, Italo Figueiredo, Carlos Mota, Adelino Maia Neto
Presenter: Adelino Maia Neto

doi://10.26678/ABCM.COBEM2023.COB2023-1097

INFLUENCES OF THE DYNAMIC WIRE FEEDING OF FLUX-CORED WIRE WITH WC IN GTAW PROCESS APPLIED TO HARDFACING COATINGS

Submission Author: Ivan Olszanski Pigozzo , SC
Co-Authors: Ivan Olszanski Pigozzo, Kaue Riffel, Regis Henrique Goncalves e Silva
Presenter: Ivan Olszanski Pigozzo

doi://10.26678/ABCM.COBEM2023.COB2023-0130

“U” TYPE FOLDED STRUCTURAL PROFILE UNDER THE INFLUENCE OF DISTORTION DUE TO THE MAG WELDING PROCESS

Submission Author: Josemairon Prado Pereira , SP
Co-Authors: Josemairon Prado Pereira, EDSON CAPELLO SOUSA, Gilberto Gonçalves, Jônatas Pereira, Bruno Agostinho Hernandez
Presenter: EDSON CAPELLO SOUSA

doi://10.26678/ABCM.COBEM2023.COB2023-0123

ALTERNATIVE BONDING OPTIONS FOR RENEWABLE RAW MATERIALS

Submission Author: Ralf Förster , Berlin
Co-Authors: Tiago Borsoi Klein, Ulrike Siemer, Andreas Loth
Presenter: Ralf Förster

doi://10.26678/ABCM.COBEM2023.COB2023-2385

Effects of the GTAW Triple electrode process on autogenous welding of carbon steel

Submission Author: Tiago Ballmann de Campos , SC
Co-Authors: Tiago Ballmann de Campos, Alisson Fernandes da Rosa, Emanuel Silva da Rosa, Mateus Barancelli Schwedersky, Regis Henrique Goncalves e Silva
Presenter: Tiago Ballmann de Campos

doi://10.26678/ABCM.COBEM2023.COB2023-2396

MANUFACTURING OF LOOPED DIAMOND WIRE BY UPSET WELDING AND HEAT TREATMENT OF WELD JOINT BASED ON JOULE EFFECT

Submission Author: Miguel Barcelos , SC
Co-Authors: Miguel Barcelos, Erick Cardoso Costa, Claudio Abilio da Silveira, Andre Kirsten, Fabio Antonio Xavier
Presenter: Miguel Barcelos

doi://10.26678/ABCM.COBEM2023.COB2023-2055

Mechatronics and Automation

Artificial Intelligent Applications 12

GRAPH NEURAL NETWORK APPLIED TO BEARING FAULT DIAGNOSIS

Submission Author: Alan Lopes , PR
Co-Authors: Luiza Scapinello Aquino, Alan Lopes, Laio Oriel Seman, Viviana Mariani, Leandro dos Santos Coelho
Presenter: Alan Lopes

doi://10.26678/ABCM.COBEM2023.COB2023-1574

Deep reinforcement learning-based algorithm to replace the PID for controlling satellite axis pointing

Submission Author: Gabriel Goes Aragão Santana , AL
Co-Authors: Gabriel Goes Aragão Santana, Ronan Arraes Jardim Chagas
Presenter: Gabriel Goes Aragão Santana

doi://10.26678/ABCM.COBEM2023.COB2023-0126

One-class Support Vector Machines for Real-time and Unsupervised Condition Monitoring of Rotary Machines

Submission Author: Alexandre Henrique Pereira Tavares , MG
Co-Authors: Alexandre Henrique Pereira Tavares , Aldemir Ap Cavalini Jr, Antonio Veiga, C. Nataraj, Amirhassan Abbasi
Presenter: Alexandre Henrique Pereira Tavares

doi://10.26678/ABCM.COBEM2023.COB2023-1929

Detecting and localizing damage in an active automotive suspension using machine learning methods and a filter bank

Submission Author: Bruno Santos , SP
Co-Authors: Bruno Santos, Fabíola Martins Campos de Oliveira, Murilo Loiola, Helói Genari
Presenter: Bruno Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1473

A novel approach for anomaly detection in edge analytics of vibration data in rotating machinery

Submission Author: Lucas Costa Brito , MG
Co-Authors: Julia Duarte, Lucas Costa Brito, Marcus Antonio Duarte, Aldemir Ap Cavalini Jr
Presenter: Julia Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-0363

EXPLORATORY DATA ANALYSIS APPLIED TO BEARING MANUFACTURING PROCESS IN THE AUTOMOTIVE FIELD

Submission Author: Isabelle Therezinha Simão , PR
Co-Authors: Alan Lopes, Isabelle Therezinha Simão, LUIZ EDUARDO THOMAZ, Viviana Mariani, Leandro dos Santos Coelho
Presenter: Isabelle Therezinha Simão

doi://10.26678/ABCM.COBEM2023.COB2023-0823

ECHO STATE NETWORKS APPLIED TO HYDROLOGICAL SERIES FORECASTING

Submission Author: LUIZ EDUARDO THOMAZ , PR
Co-Authors: José Henrique Kleinübing Larcher, LUIZ EDUARDO THOMAZ, Leandro dos Santos Coelho, Viviana Mariani
Presenter: LUIZ EDUARDO THOMAZ

doi://10.26678/ABCM.COBEM2023.COB2023-1027

Artificial immune system applied in the detection of damage in an inverted pendulum under the effect of a controller.

Submission Author: Matheus Medeiros Donatoni , SP
Co-Authors: Matheus Medeiros Donatoni, Fabio Roberto Chavarette
Presenter: Matheus Medeiros Donatoni

doi://10.26678/ABCM.COBEM2023.COB2023-0031

FAULT DIAGNOSIS OF TURBOCHARGED SPARK-IGNITED ENGINE SYSTEM BASED ON LONG SHORT-TERM MEMORY APPROACH

Submission Author: LUIZ EDUARDO THOMAZ , PR
Co-Authors: Lucas Takara, LUIZ EDUARDO THOMAZ, Viviana Mariani, Leandro dos Santos Coelho
Presenter: LUIZ EDUARDO THOMAZ

doi://10.26678/ABCM.COBEM2023.COB2023-1672

Application of Differential Evolution for Adjusting the Parameters of the LQR to a Quadrotor

Submission Author: Laura Ribeiro , MG
Co-Authors: Laura Ribeiro, Aniel Morais, Gabriela Vieira Lima, Kenji Fabiano Ávila Okada
Presenter: Laura Ribeiro

doi://10.26678/ABCM.COBEM2023.COB2023-1374

AUTOMOTIVE BEARINGS ANALYSIS BASED ON REGRESSION MODELS

doi://10.26678/ABCM.COBEM2023.COB2023-0822

Data-driven model to estimate State-of-Health (SoH) from Lithium-Ion Batteries

Submission Author: Carlos Antônio Rufino Júnior , MG
Co-Authors: Carlos Antônio Rufino Júnior, Hans-Georg Schweiger
Presenter: Carlos Antônio Rufino Júnior

doi://10.26678/ABCM.COBEM2023.COB2023-2104

Assistive Technologies 2

Prototype of an assistive device for lower limb motor rehabilitation.

Submission Author: VICTOR RAUL HUAMAN CONDORI , SP
Co-Authors: VICTOR RAUL HUAMAN CONDORI, Victor Rosado, Fernando Silva
Presenter: VICTOR RAUL HUAMAN CONDORI

doi://10.26678/ABCM.COBEM2023.COB2023-0298

A study of the application of automatic speech recognition in assistive robotics

Submission Author: Walter de Britto Vidal Filho , DF
Co-Authors: Pedro Pereira Nunes, Walter de Britto Vidal Filho
Presenter: Walter de Britto Vidal Filho

doi://10.26678/ABCM.COBEM2023.COB2023-1007

Computer Vision 2

A simplified model for cloud height determination with fisheye cameras stereo computer vision

Submission Author: Darío Gerardo Fantini , DF
Co-Authors: Darío Gerardo Fantini, Matheus Carvalho, Mario Benjamim Baptista de Siqueira
Presenter: Mario Benjamim Baptista de Siqueira

doi://10.26678/ABCM.COBEM2023.COB2023-1894

Mechanical components recognition through computer vision usage

Submission Author: Leonel Fernandes Balbino , PR
Co-Authors: Leonel Fernandes Balbino, Carlos Alberto Fiakofski Cadamuro, Giuliana Sardi Venter
Presenter: Giuliana Sardi Venter

doi://10.26678/ABCM.COBEM2023.COB2023-1847

Control Systems 11

STABILIZATION OF A FURUTA PENDULUM BY USING A VARIANT DISTURBANCE REJECTION CONTROL APPROACH

Submission Author: Alessandro Zachi , RJ
Co-Authors: Lúcio Mascarenhas, Josiel Gouvêa, Antonio Carlos Valdiero, Walter de Britto Vidal Filho, Alessandro Zachi
Presenter: Alessandro Zachi

doi://10.26678/ABCM.COBEM2023.COB2023-0573

Modeling And Simulation Of a Sustainable Extended Range Enhanced Electric Vehicle

Submission Author: Alexandre Moura da Silveira , PR
Co-Authors: Alexandre Moura da Silveira, Betina Zynger Capaverde, Wellington Balmant, Matheus Ben-Hur Ramirez Sapucaia, ALEF LENO NASCIMENTO ROCHA, Giuliana Sardi Venter, JOSÉ VIRIATO COELHO VARGAS
Presenter: Alexandre Moura da Silveira

doi://10.26678/ABCM.COBEM2023.COB2023-2154

A Tutorial on Linear Gap Metrics for Robust Control

Submission Author: Jose Luiz Montandon Neto , SP
Co-Authors: Jose Luiz Montandon Neto, André Vecchione, Thiago Boaventura
Presenter: André Vecchione

doi://10.26678/ABCM.COBEM2023.COB2023-0836

ANALYSIS OF THE FEASIBILITY OF CONTROLLED AND PROGRAMMABLE ACCELERATION OF ELECTRIC VEHICLES

Submission Author: Diego Alves de Miranda , SC
Co-Authors: Fabio Vaz, Diego Alves de Miranda
Presenter: Diego Alves de Miranda

doi://10.26678/ABCM.COBEM2023.COB2023-0076

DEVELOPMENT OF DEVICE FOR PRODUCING FILAMENT FROM PET BOTTLES USED IN ADDITIVE MANUFACTURING: ANALYSIS OF PARAMETERS AND COMPARISON WITH COMMERCIAL PRODUCTS

Submission Author: Jorge Henrique Souza Marques Alves , MG
Co-Authors: Jorge Henrique Souza Marques Alves, Matheus Mazetto, Daniel Florez, Márcio Peres de Souza, Diego Augusto Costa Alves, CLEUDMAR ARAÚJO, Arthur Alves Fiocchi
Presenter: Jorge Henrique Souza Marques Alves

doi://10.26678/ABCM.COBEM2023.COB2023-2075

Control Techniques Applied to an Electromagnetic Levitation System by Attraction

Submission Author: Renan Imamura , SP
Co-Authors: Renan Imamura, Décio Crisol Donha, Éverton Lins de Oliveira
Presenter: Renan Imamura

doi://10.26678/ABCM.COBEM2023.COB2023-1522

Design of RST digital controller and PLC implementation on a Water Level Bench

Submission Author: Marco Antonio dos Santos Caballero , AM
Co-Authors: Marco Antonio dos Santos Caballero, Paulo Roberto Oliveira Martins, Gustavo Cunha da Silva Neto, Florindo Anronio Ayres Júnior
Presenter: Marco Antonio dos Santos Caballero

doi://10.26678/ABCM.COBEM2023.COB2023-2176

INTEGRATION OF PROGRAMMABLE LOGIC CONTROLLER WITH DATABASE AND WEB APPLICATION IN THE WOOD PROCESSING INDUSTRY

Submission Author: yves-garnard irilan , SC
Co-Authors: yves-garnard irilan
Presenter: yves-garnard irilan

doi://10.26678/ABCM.COBEM2023.COB2023-1808

Robust UAV formation control

Submission Author: Thamiris Costa , SC
Co-Authors: Thamiris Costa, Ebrahim El Youssef, Edson Roberto De Pieri
Presenter: Thamiris Costa

doi://10.26678/ABCM.COBEM2023.COB2023-1433

A review on gyrostabilized systems

Submission Author: Murillo Batista dos Santos , SP
Co-Authors: Murillo Batista dos Santos, Oswaldo Horikawa
Presenter: Murillo Batista dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0324

INFLUENCE OF SECONDARY PATH MODEL ON NOISE REDUCTION PERFORMANCE OF ACTIVE NOISE CONTROL SYSTEM IN DUCT

Submission Author: Gabriela Cristina Candido da Silva , DF
Co-Authors: Gabriela Cristina Candido da Silva, Renato Lopes, Maria Alzira de Araújo Nunes, Bruno Giuliani Gomes, André Murilo
Presenter: Bruno Giuliani Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0148

Fluid Power Systems 5

Analysis of Digital Hydraulic System for Aircraft with Focus on Energy Efficiency

Submission Author: Marcos Paulo Nostrani , SC
Co-Authors: Diego Mise Cruz, Marcos Paulo Nostrani, Ivan Júnior Mantovani, Henri Carlo Belan, Victor Juliano De Negri
Presenter: Marcos Paulo Nostrani

doi://10.26678/ABCM.COBEM2023.COB2023-0767

A study of an Electro-Hydrostatic Actuator for aircraft application

Submission Author: Dimitri Oliveira e Silva , PA
Co-Authors: Dimitri Oliveira e Silva, Marcos Paulo Nostrani, Gierri Waltrich, Victor Juliano De Negri
Presenter: Marcos Paulo Nostrani

doi://10.26678/ABCM.COBEM2023.COB2023-1628

The State-of-the-Art of Hydrostatic Transmissions in Micro-Hydropower Plants

Submission Author: Marina Baldissera de Souza , SC
Co-Authors: Marina Baldissera de Souza, Sabrina Knoll Godoy Ilha, Leticia Renata De carvalho, Ruben Solarte Bolaños, Daniel Martins, Antonio Carlos Valdiero, Luís Antônio Bortolaia
Presenter: Sabrina Knoll Godoy Ilha

doi://10.26678/ABCM.COBEM2023.COB2023-0757

Experimental estimation of the moisture content of cotton bales through required hydraulic force

Submission Author: André Araújo Fernandes , SP
Co-Authors: André Araújo Fernandes, Gabriel Alberto Bermudez Arias, André Vecchione, Thiago Boaventura
Presenter: André Vecchione

doi://10.26678/ABCM.COBEM2023.COB2023-1452

MODELING AND EVALUATION OF THE REGENERATIVE POTENTIAL OF A QUARTER-CAR WITH HYDRAULIC DAMPER

Submission Author: João Gabriel Benedito Duarte , RS
Co-Authors: João Gabriel Benedito Duarte, Augusto Schmidt Lenz, Mariana Damm Poli, Eduardo André Perondi
Presenter: João Gabriel Benedito Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-1126

Industrial Informatics, Discrete and Hybrid Systems 1

Model checking aided design of alarm and seal logic for ship control and monitoring system

Submission Author: RAFAEL CELESTINO DOS SANTOS , SC
Co-Authors: RAFAEL CELESTINO DOS SANTOS, Max Hering de Queiroz
Presenter: RAFAEL CELESTINO DOS SANTOS

doi://10.26678/ABCM.COBEM2023.COB2023-0915

Robotics and Mechanisms 20

An Analysis of a 4-DoF Kinematically Redundant Planar Parallel Mechanism

Submission Author: Luan Meneghini , SC
Co-Authors: Luan Meneghini, Henrique Simas, Roberto Simoni
Presenter: Luan Meneghini

doi://10.26678/ABCM.COBEM2023.COB2023-0773

Adaptive Trajectories for Robotic Manipulators

Submission Author: João Victor Zanoni , SC
Co-Authors: João Victor Zanoni, Fernanda de Oliveira Ferreira, Leonardo Mejia Rincon
Presenter: João Victor Zanoni

doi://10.26678/ABCM.COBEM2023.COB2023-0857

Exploring Snake-Like Locomotion: Analysis of Serpenoid Curves and Anisotropic Friction in Snake Robots

Submission Author: Dianne Magalhães Viana , DF
Co-Authors: Vinícius Carvalho Gomes, Gabriel Baliza Rocha, Mariana Cruz, Thiago de Deus Lima Rocha, Dianne Magalhães Viana, Carla Maria Chagas e Cavalcante Koike, Jones Yudi Mori Alves da Silva
Presenter: Thiago de Deus Lima Rocha

doi://10.26678/ABCM.COBEM2023.COB2023-2407

CONCEPTUAL DESIGN OF A PLATFORM FOR TRANSFORMER TRANSPORTATION IN DIFFIULT ACCESS LOCATIONS

Submission Author: Lucas Imanisi , SC
Co-Authors: Lucas Imanisi, Alinne Geronimo, Rodrigo de Souza Vieira, Roberto Kinceler, Sidnei Avelino da Silva Junior
Presenter: Lucas Imanisi

doi://10.26678/ABCM.COBEM2023.COB2023-1834

Design, Simulation and Programming of an Arduino Robotic Cell

Submission Author: Julio Cesar Frantz , SC
Co-Authors: Gabriel Machado, Julio Cesar Frantz
Presenter: Gabriel Machado

doi://10.26678/ABCM.COBEM2023.COB2023-0295

A methodological proposal for the optimal solution of the 2-DPLP problem

Submission Author: Fernanda de Oliveira Ferreira , SC
Co-Authors: Fernanda de Oliveira Ferreira, João Victor Zanoni, Aline Teodoro , Leonardo Mejia Rincon
Presenter: Fernanda de Oliveira Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-0816

Ankle rehabilitation robots and its main features: a review

Submission Author: Ricardo Halla II , MG
Co-Authors: Ricardo Halla II, Rogério Sales Gonçalves
Presenter: Ricardo Halla II

doi://10.26678/ABCM.COBEM2023.COB2023-0670

Synthesis of a new clamping mechanism design for agricultural harvest

Submission Author: Esdras Salgado da Silva , PR
Co-Authors: Gustavo Valdatti Souza, Leonardo Grandini da Silveira Adami, Esdras Salgado da Silva , Daniel Martins
Presenter: Gustavo Valdatti Souza

doi://10.26678/ABCM.COBEM2023.COB2023-1534

Analysis of Structural Robustness for Low-Cost Quadrupedal Robots

Submission Author: Nicolas Ferreira Cruvinel Monteiro Souza , SP
Co-Authors: Nicolas Ferreira Cruvinel Monteiro Souza, Leonardo Felipe dos Santos, Vivian Suzano Medeiros, Marcelo Becker
Presenter: Leonardo Felipe dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1187

Construction of an Impedance Control Test Bench

Submission Author: Elisa Gamper Vergamini , SP
Co-Authors: Elisa Gamper Vergamini, Leonardo Felipe dos Santos, Cícero Luiz Alves Zanette, Yecid Moreno, Felix Mauricio Escalante Ortega, Thiago Boaventura
Presenter: Elisa Gamper Vergamini

doi://10.26678/ABCM.COBEM2023.COB2023-0847

Development of a New Functional and Discrete Finger Prosthesis

Submission Author: Esdras Salgado da Silva , PR
Co-Authors: Esdras Salgado da Silva , Gustavo Valdatti Souza, Leonardo Mejia Rincon, Daniel Martins, Gustavo Paul Exel
Presenter: Esdras Salgado da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1932

The Review of Research on Wrist Rehabilitation Robots

Submission Author: Gabriella Faina Garcia , MG
Co-Authors: Gabriella Faina Garcia, Rogério Sales Gonçalves
Presenter: Rogério Sales Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1904

Static analysis and failure modes of Humanoid Robots in contact with the environment

Submission Author: Lucas Weihmann , SC
Co-Authors: Lucas Weihmann, Leandro dos Santos Coelho, Juliano Pierezan
Presenter: Lucas Weihmann

doi://10.26678/ABCM.COBEM2023.COB2023-0562

Mass Reduction and Mobility Improvement of an Overhead Powerline Inspection Robot

Submission Author: Eduardo da Silveira de Meneses , SC
Co-Authors: Eduardo da Silveira de Meneses, Estevan Hideki Murai, Gustavo Fernandes, Daniel Martins, Roberto Kinceler
Presenter: Eduardo da Silveira de Meneses

doi://10.26678/ABCM.COBEM2023.COB2023-1137

An Educational Platform for Tripteron/Triflex II Robots: A Step towards the Development of New Parallel Manipulators

Submission Author: Anelize Zomkowski Salvi , SC
Co-Authors: Anelize Zomkowski Salvi, Leonardo Mejia Rincon, Daniel Ponce, Andrea Piga Carboni, Henrique Simas
Presenter: Leonardo Mejia Rincon

doi://10.26678/ABCM.COBEM2023.COB2023-1200

A new equation for the point closest to the origin on an axis: a review of Chasles' Theorem

Submission Author: Luis Paulo Laus , PR
Co-Authors: Luis Paulo Laus, Jonathan Selig
Presenter: Luis Paulo Laus

doi://10.26678/ABCM.COBEM2023.COB2023-0932

Efficiency of the Reducer of a Bevel-Geared Motor

Submission Author: Marina Baldissera de Souza , SC
Co-Authors: Marina Baldissera de Souza, Gustavo Fernandes, Daniel Martins, Andrea Piga Carboni, Luis Paulo Laus
Presenter: Gustavo Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-0761

Optimal dimensional synthesis of a six-link steering linkage using natural coordinates as design variables

Submission Author: Carlos Pinzon , SC
Co-Authors: neider nadid romero nuñez, Carlos Pinzon, Rodrigo de Souza Vieira, Daniel Martins
Presenter: Carlos Pinzon

doi://10.26678/ABCM.COBEM2023.COB2023-0689

Comparative study of haptic interfaces with parallel and serial kinematic configuration

Submission Author: Walter de Britto Vidal Filho , DF
Co-Authors: Liz Carolina Costato, Walter de Britto Vidal Filho
Presenter: Walter de Britto Vidal Filho

doi://10.26678/ABCM.COBEM2023.COB2023-1003

Investigation on the use of parallel four-bar linkages in humanoid robot legs during stand-up motion

Submission Author: Thiago de Paula Sales , SP
Co-Authors: Thiago Tonaco, Thiago de Paula Sales
Presenter: Thiago de Paula Sales

doi://10.26678/ABCM.COBEM2023.COB2023-1090

Sensors and Actuators 5

MEASUREMENT OF FRESH CONCRETE COMPONENTS USING ELECTRICAL IMPEDANCE

Submission Author: Marcos Roberto Fortulan , SP
Co-Authors: Marcos Roberto Fortulan, Francisco Julio do Nascimento, Oscar Mauricio Hernandez Rodriguez
Presenter: Marcos Roberto Fortulan

doi://10.26678/ABCM.COBEM2023.COB2023-2412

DEVELOPMENT OF A FORCED AIR-COOLING SYSTEM APPLIED TO ADDITIVE MANUFACTURING BY ARC DEPOSITION

Submission Author: Flavio Emanuel de Lima Silva , PB
Co-Authors: Flavio Emanuel de Lima Silva, José Sávyo Soares Lira, Júlio Feitosa da Silva Neto, Yuri Dias, Antonio Almeida Silva, Jefferson Segundo de Lima
Presenter: Flavio Emanuel de Lima Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1237

Comparative performance analysis for double-roof pyramid wavefront sensor

Submission Author: Rodrigo Stoeterau , SP
Co-Authors: Oswaldo Horikawa, Rodrigo Stoeterau
Presenter: Rodrigo Stoeterau

doi://10.26678/ABCM.COBEM2023.COB2023-2378

ACOUSTIC EMISSION SYSTEM APPLIED TO THE IDENTIFICATION OF EARLY STAGE CRACKS IN METALLIC COMPONENTS

Submission Author: Raul Gaspari Santos , SP
Co-Authors: Raul Gaspari Santos, Niederauer Mastelari
Presenter: Raul Gaspari Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2158

The use of a microcontroller for level control in a submerged cooling system applied to Wire Arc Additive Manufacturing

Submission Author: José Sávyo Soares Lira , PB
Co-Authors: José Sávyo Soares Lira, Flavio Emanuel de Lima Silva, Yuri Dias, Júlio Feitosa da Silva Neto, Antonio Almeida Silva, Jefferson Segundo de Lima
Presenter: José Sávyo Soares Lira

doi://10.26678/ABCM.COBEM2023.COB2023-1264

Nano and Microfluidic and Micro-Systems

Heat and Mass Transfer in Micro and Nano scales 8

COGENERATION IN A HIGH CONCENTRATION PHOTOVOLTAIC (HCPV) SYSTEM USING MICROCHANNEL HEAT EXCHANGERS FOR HEAT RECOVERY

Submission Author: Rafael San Martin Moreira , RJ
Co-Authors: Rafael San Martin Moreira, Elena Peñaranda, Bruno Scaramuzza dos Reis, Diego Busson de Moraes, Gabriel Rodrigues, Carolina Palma Naveira Cotta
Presenter: Rafael San Martin Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-2037

High-Speed and Infrared Flow Boiling Visualization in Microchannels with modified surfaces

Submission Author: Ana Moita , Lisboa
Co-Authors: Mariana Perez, Pedro Daniel Fernandes Pontes, Ana Moita
Presenter: Mariana Perez

doi://10.26678/ABCM.COBEM2023.COB2023-2432

Evaluation of flow boiling pressure drop at high mass velocities in microchannels using R123

Submission Author: Thalles Coimbra Borba Roldão , SP
Co-Authors: Thalles Coimbra Borba Roldão , Juliana Silva Brasil, Cristiano Tibiriçá
Presenter: Thalles Coimbra Borba Roldão

doi://10.26678/ABCM.COBEM2023.COB2023-0253

INFLUENCE OF WORKING FLUID ON MICRO-PIN FIN HEAT SINKS UNDER SINGLE-PHASE FLOW CONDITIONS

Submission Author: Ariany Moreira , SP
Co-Authors: Ariany Moreira, Bruno de Andrade, Jessica Martha Nunes, Elaine Maria Cardoso
Presenter: Ariany Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-0730

Estimation of boundary heat flux in Micro-Channels Via Bayesian Inference By The Transitional Markov Chain Monte Carlo Algorithm

Submission Author: Lucas Asth , RJ
Co-Authors: Lucas Asth, Luiz A. S. Abreu, Diego Knupp, Leonardo Stutz, Eduardo Cunha Classe
Presenter: Eduardo Cunha Classe

doi://10.26678/ABCM.COBEM2023.COB2023-1816

EFFECT OF POROUS MICROSTRUCTURED ON POOL BOILING OF DI-WATER

Submission Author: Arthur Gomes da Silva Vilaronga , BA
Co-Authors: Arthur Gomes da Silva Vilaronga, Renan Rezende, Leonardo Manetti, Elaine Maria Cardoso
Presenter: Arthur Gomes da Silva Vilaronga

doi://10.26678/ABCM.COBEM2023.COB2023-0619

MULTI-OBJECTIVE SHAPE OPTIMIZATION OF A PASSIVE MICROMIXER USING GENETIC ALGORITHM AND MULTI-OBJECTIVE DECISION-MAKING ALGORITHMS

Submission Author: Eduardo Henrique Taube Cunegatto , RS
Co-Authors: Eduardo Henrique Taube Cunegatto, Kristian Nascimento Telöken, Lenon Audibert Cisco, Flavia Zinani, Sandro José Rigo
Presenter: Eduardo Henrique Taube Cunegatto

doi://10.26678/ABCM.COBEM2023.COB2023-1945

Digital Image Correlation applied to interface tracking during flow boiling in microchannels

Submission Author: Debora Carneiro Moreira , SP
Co-Authors: Debora Carneiro Moreira, Jorge Nicolau dos Santos, Valter Salles do Nascimento Junior, Gherhardt Ribatski
Presenter: Debora Carneiro Moreira

doi://10.26678/ABCM.COBEM2023.COB2023-2064

Micro and Nanofluidics 5

Relative permeability curves measurement and visualization of pore-scale multiphase flow in fracture porous media

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Vivian Sousa, Jorge Antonio Avendaño Benavides, Brenda Maria De Castro Costa, Marcio CARVALHO
Presenter: Vivian Sousa

doi://10.26678/ABCM.COBEM2023.COB2023-1563

Analisys of the rarefied flow in microchannels with various geometries.

Submission Author: Vinicius Daher , 26
Co-Authors: Vinicius Daher, Ruan Ramon Penha dos Passos Pereira, Cayo Prado Fernandes Francisco
Presenter: Ruan Ramon Penha dos Passos Pereira

doi://10.26678/ABCM.COBEM2023.COB2023-1362

Encapsulation and controlled release of HCl in PDMS capsules

Submission Author: Ademir Medeiros , RJ
Co-Authors: Ademir Medeiros, Mateus de Lima, Amanda C. S. N. Pessoa, Bruna Leopercio, Marcio CARVALHO
Presenter: Ademir Medeiros

doi://10.26678/ABCM.COBEM2023.COB2023-1591

Experimental investigation and numerical simulation of heat transfer and pressure drop of MWCNT/thermal oil nanofluid flowing inside a horizontal tube

Submission Author: Daniel Florez , MG
Co-Authors: Daniel Florez, Edwin Martin Cardenas Contreras, Erick Oliveira do Nascimento, ENIO PEDONE BANDARRA FILHO
Presenter: Daniel Florez

doi://10.26678/ABCM.COBEM2023.COB2023-0936

Study of Enhanced Oil Recovery by Low Salinity Waterflooding in Dual-Porosity Micromodels

Submission Author: Victor Bastos Braga Coelho , SC
Co-Authors: Victor Bastos Braga Coelho, Fabiano Wolf
Presenter: Victor Bastos Braga Coelho

doi://10.26678/ABCM.COBEM2023.COB2023-2132

Non-linear Phenomena

Analytical methods 1

Study of the first mode of vibration of transmission line cables via Rayleigh’s method and elastic line equation

Submission Author: Alexandre de Macêdo Wahrhaftig , BA
Co-Authors: Alexandre de Macêdo Wahrhaftig, Iago Gonçalves de Oliveira, Rodrigo Oliveira da Silva Conceição , Cibele Mota Menezes, Eduardo Márcio de Oliveira Lopes, Kevin Mauricio Menon Ribeiro, Gabriel do Amaral, José Manoel Balthazar
Presenter: Cibele Mota Menezes

doi://10.26678/ABCM.COBEM2023.COB2023-0454

Applications of Nonlinear Systems in Engineering 7

Influence of a non-continuous and unilateral elastic base on the nonlinear vibrations of a cylindrical panel

Submission Author: Frederico Martins Alves da Silva , GO
Co-Authors: Jordana Morais, Frederico Martins Alves da Silva
Presenter: Jordana Morais

doi://10.26678/ABCM.COBEM2023.COB2023-1468

On the design of nonlinear resonators to improve the displacement transmissibility of mono-coupled periodic rod structures

Submission Author: Felipe Anezio , SP
Co-Authors: Felipe Anezio, Paulo José Paupitz Gonçalves, Douglas Roca Santo, Leopoldo de Oliveira
Presenter: Paulo José Paupitz Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-0784

Non-linear Electrical Submersible Pump Model for Model Predictive Control considering viscous effects

Submission Author: Mauricio Barrios Castellanos , SP
Co-Authors: Mauricio Barrios Castellanos, Alberto Luiz Serpa
Presenter: Mauricio Barrios Castellanos

doi://10.26678/ABCM.COBEM2023.COB2023-1548

Nonlinear dynamics of the chaotic pendulum coupled to a DC motor and a DC generator

Submission Author: Rafael Avanço , MS
Co-Authors: Rafael Avanço, Rodrigo Borges Santos, Clivaldo Oliveira , Mauricio A. Ribeiro, Angelo Marcelo Tusset, José Manoel Balthazar, Sanderson da Conceição
Presenter: Rafael Avanço

doi://10.26678/ABCM.COBEM2023.COB2023-0082

2-DOF discrete model for non-linear vibrations analysis of guyed towers considering unilateral contact cables

Submission Author: Frederico Martins Alves da Silva , GO
Co-Authors: Fernanda Silva, Frederico Martins Alves da Silva
Presenter: Frederico Martins Alves da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1373

Analysis of the dynamics and energy efficiency of a nonideal portal frame structural support system coupled to a passive absorber

Submission Author: Angelo Marcelo Tusset , PR
Co-Authors: Angelo Marcelo Tusset, José Manoel Balthazar
Presenter: Angelo Marcelo Tusset

doi://10.26678/ABCM.COBEM2023.COB2023-2248

Numerical and experimental investigation of the dynamic behavior of a CONVEYOR BELT driven by a non-ideal source

Submission Author: Leandro Rodrigo de Oliveira , SP
Co-Authors: Leandro Rodrigo de Oliveira, José Manoel Balthazar, Eduardo Petrocino , Atila Bueno, Paulo José Paupitz Gonçalves, Marcos Silveira, Mauricio A. Ribeiro, Angelo Marcelo Tusset, Airton Nabarrete
Presenter: José Manoel Balthazar

doi://10.26678/ABCM.COBEM2023.COB2023-0030

Chaos and its Applications 3

CHAOS CONTROL USING A ROBUST METHOD FOR THE STABILIZATION OF UNSTABLE PERIODIC ORBITS

Submission Author: Alessandro Zachi , RJ
Co-Authors: Alessandro Zachi, Josiel Gouvêa, Aline Souza de Paula, Marcelo Savi
Presenter: Alessandro Zachi

doi://10.26678/ABCM.COBEM2023.COB2023-0571

CLASSIFICATION OF HEART RHYTHM DYNAMICS USING ARTIFICIAL NEURAL NETWORKS

Submission Author: Igor Fortuna , RJ
Co-Authors: Igor Fortuna, Marcelo Savi
Presenter: Igor Fortuna

doi://10.26678/ABCM.COBEM2023.COB2023-2404

Demagnetization Fault Detection Method In Brushless Dc Motors Based On Fractal Dimensions

Submission Author: Thyago L. de Vasconcelos Lima , PB
Co-Authors: Thyago L. de Vasconcelos Lima, Aldeni Sudário de Sousa, Abel Lima Filho, Francisco Belo, Ramon Leonn Victor Medeiros, Igor Stefan
Presenter: Alisson Alves dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-2148

Experimental Methods in Nonlinear Phenomena 1

Nonlinear dynamics of a cantilever beam excited by a limited power supply with magnetic interaction

Submission Author: Eduardo Petrocino , SP
Co-Authors: Eduardo Petrocino , José Manoel Balthazar, Marcos Silveira, Paulo José Paupitz Gonçalves, Angelo Marcelo Tusset, Mauricio A. Ribeiro, Leandro Rodrigo de Oliveira
Presenter: José Manoel Balthazar

doi://10.26678/ABCM.COBEM2023.COB2023-0050

Inverse Problems in Nonlinear Phenomena 1

Estimation of pollution sources with Physics-Informed and Bayesian Neural Networks

Submission Author: Roberto Mamud Guedes da Silva , RJ
Co-Authors: Roberto Mamud Guedes da Silva, Carlos Tadeu Pagani Zanini, Helio Migon, Antônio Silva Neto
Presenter: Roberto Mamud Guedes da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0789

Nonlinear Mechanics 1

Mechanical Effects on Turing Pattern Formation in Bulk Diffusion and Surface Reaction-diffusion Systems

Submission Author: Francisco S. Forte Neto , PA
Co-Authors: Francisco S. Forte Neto, Fernando Pereira Duda
Presenter: Fernando Pereira Duda

doi://10.26678/ABCM.COBEM2023.COB2023-2217

Numerical methods 1

EXPERIMENTAL AND SIMULATION ANALYSIS OF VERTICAL SURFACE GRINDING PROCESS IN PREDICTION OF FORCES

Submission Author: Luciano Fernandes , MG
Co-Authors: Bruno Gabriel Carneiro, RAPHAEL SILVA LINS, Luciano Fernandes
Presenter: RAPHAEL SILVA LINS

doi://10.26678/ABCM.COBEM2023.COB2023-0623

Offshore and Petroleum Engineering

Offshore and Petroleum Engineering 43

NUMERICAL SIMULATION OF GAS LIFT INJECTION AND ITS EFFECTS ON THE SLUGGING PHENOMENON IN OFFSHORE PRODUCTION

Submission Author: Tony Herbert Freire de Andrade , PB
Co-Authors: Tony Herbert Freire de Andrade, Wayne Gabriel Nóbrega Firme, Átyla Matheus de Araújo Costa, João Ikaro Vitorino Pereira, Tales Dmitri Araujo Lopes
Presenter: Tony Herbert Freire de Andrade

doi://10.26678/ABCM.COBEM2023.COB2023-2063

Studies about the dimensioning of flanged unions of industrial valves for applications in Oil & Gas installations

Submission Author: Felipe Frizon , SC
Co-Authors: Felipe Frizon, Diego Rizzotto Rossetto, Diógenes Barbosa Teles
Presenter: Felipe Frizon

doi://10.26678/ABCM.COBEM2023.COB2023-1532

Displacement flows of miscible fluids through axisymmetric expansion-contractions

Submission Author: Rafael Menezes de Oliveira , RJ
Co-Authors: FREDERICO CARVALHO, Rafael Menezes de Oliveira
Presenter: Rafael Menezes de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0926

EXPERIMENTAL DETERMINATION OF ADDED MASSES FOR AN OPEN FRAME ROV THROUGH DAMPED FREE OSCILLATIONS

Submission Author: Paola Fonseca , SP
Co-Authors: Paola Fonseca, Juan Pablo Julca Avila
Presenter: Paola Fonseca

doi://10.26678/ABCM.COBEM2023.COB2023-2422

Development of a inspection tool for flexible pipes integrity test: annular flooded detection

Submission Author: Carlos Alberto Nogueira Junior , SC
Co-Authors: Carlos Alberto Nogueira Junior, Ismael José Secco, Doglas Negri, Eduardo Vieira, Andrea Piga Carboni, João Vítor Herrmann
Presenter: Carlos Alberto Nogueira Junior

doi://10.26678/ABCM.COBEM2023.COB2023-1062

Characterization of two-dimensional reservoir based on transient pressure and temperature data using ensemble-based method

Submission Author: Marcio CARVALHO , RJ
Co-Authors: José Adriano Cardoso, Vinicius Mattoso Reis Da Silva, Danmer Maza, Marcio CARVALHO
Presenter: Vinicius Mattoso Reis Da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1714

Data-driven multiphase flow parameters prediction capabilities and limitations on a real oil well production data

Submission Author: Anderson Faller , SP
Co-Authors: Anderson Faller, Saon Vieira, Bernardo Foresti, Adriano Todorovic Fabro, Marcelo Souza de Castro
Presenter: Anderson Faller

doi://10.26678/ABCM.COBEM2023.COB2023-1242

Modeling Flow Restart Effects on Annular Pressure Build-up

Submission Author: Ricardo Knesebeck , PR
Co-Authors: Ricardo Knesebeck, Nezia de Rosso, Cezar Otaviano Ribeiro Negrao
Presenter: Ricardo Knesebeck

doi://10.26678/ABCM.COBEM2023.COB2023-1231

Experimental investigation of the effect of scale inhibitors on the pressure drop and on the deposition inside hydrocyclones

Submission Author: Juliana Ferreira Gonçalves , RJ
Co-Authors: Juliana Ferreira Gonçalves, Andressa Amorim Daás, Andrei Hünemeyer Dullius, Mariana Dominguez, Lucas Borges Menezes, Juliana Loureiro, Fabricio Silva
Presenter: Juliana Ferreira Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1096

Analysis of Stress Overshoot Fitting in Flow Start-up Tests for Different Drilling Fluids

Submission Author: LUIS HUMBERTO QUITIAN ARDILA , PR
Co-Authors: LUIS HUMBERTO QUITIAN ARDILA, Elis Marina Schvan Wendt, Leonardo de Souza Santos, Diogo Elias da Vinha Andrade, Admilson Franco
Presenter: LUIS HUMBERTO QUITIAN ARDILA

doi://10.26678/ABCM.COBEM2023.COB2023-2410

Control performance improvement of light cut naphtha extraction via model-free adaptive filter

Submission Author: Lucas Moura Gomes , DF
Co-Authors: Lucas Moura Gomes, Luis Longhi, José Oniram de Aquino Limaverde Filho, Eugenio Fortaleza
Presenter: Lucas Moura Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-2225

OCEAN CURRENT ESTIMATION FOR A TURRET-MOORED FPSO USING NEURAL NETWORKS

Submission Author: Pedro Felipe Lavra Dias , MA
Co-Authors: Pedro Felipe Lavra Dias, Gustavo Bisinotto, Anna Helena Reali Costa, Eduardo Aoun Tannuri
Presenter: Pedro Felipe Lavra Dias

doi://10.26678/ABCM.COBEM2023.COB2023-0723

Investigation of a magnetic anti-scaling device for fouling mitigation in valves

Submission Author: Caroline de Oliveira Goncalves , RJ
Co-Authors: Caroline de Oliveira Goncalves, Daniel Imbelloni Costa e Silva Morais, Juliana Loureiro
Presenter: Daniel Imbelloni Costa e Silva Morais

doi://10.26678/ABCM.COBEM2023.COB2023-1143

Equivalence between Brinkman, single and double continuum models in the description of single-phase flow in 2D vuggy porous media

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Daniel Vaz Campos, Marcos Vitor Barbosa Machado, Marcio CARVALHO
Presenter: Daniel Vaz Campos

doi://10.26678/ABCM.COBEM2023.COB2023-1252

Experiments of Flow-Induced Vibration on Models in Regimes of Low Reynolds Numbers: PART 1 - Circular-Columns Arrangements

Submission Author: André Fujarra , SC
Co-Authors: Monique Ellen Bruner, Karen Soares, Gabriel de Paula Dittrich, André Fujarra
Presenter: André Fujarra

doi://10.26678/ABCM.COBEM2023.COB2023-1952

Effect of Relative Permeability Curves on Near Well Gas-Condensate Flow

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Debora Yohane Cunha Azevedo Martins, Paula Reis, Marcio CARVALHO
Presenter: Marcio CARVALHO

doi://10.26678/ABCM.COBEM2023.COB2023-1551

Pressure and temperature response of stratified reservoirs during well tests

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Vinicius Mattoso Reis Da Silva, Danmer Maza, Abelardo Barreto Jr, FREDERICO CARVALHO GOMES, Marcio CARVALHO
Presenter: Vinicius Mattoso Reis Da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-1755

Experiments of Flow-Induced Vibration on Models in Regimes of Low Reynolds Numbers: PART 2 - Square-Columns Arrangements

Submission Author: André Fujarra , SC
Co-Authors: Adriana Wallbach, Karen Soares, Gabriel de Paula Dittrich, André Fujarra
Presenter: Adriana Wallbach

doi://10.26678/ABCM.COBEM2023.COB2023-1953

DISTANCE-TO-TRAP WEIGHTING FUNCTIONS FOR SELECTION AND RANKING OF CO2 STORAGE SITES

Submission Author: Gustavo Charles Peixoto de Oliveira , PB
Co-Authors: José Wilker de Lima Silva, Moisés Dantas dos Santos
Presenter: Gustavo Charles Peixoto de Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-2381

STUDY OF COMMERCIAL COATING OF PIPES TO IMPROVE THE FLOW OF WATER-OIL EMULSIONS

Submission Author: Rafaela Silva , SP
Co-Authors: Rafaela Silva, Carlos Eduardo Perles, Vanessa Guersoni, Antonio Bannwart
Presenter: Rafaela Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0170

A comparative analysis of automated contact angle measurement methods for X-ray microtomographic images of two-phase flow in porous media

Submission Author: Christoph Zevenbergen , SC
Co-Authors: Christoph Zevenbergen, Ricardo Bazarin, Diogo Nardelli Siebert, Luís Orlando Emerich dos Santos
Presenter: Christoph Zevenbergen

doi://10.26678/ABCM.COBEM2023.COB2023-1723

Experimental analysis of the interactions between air microbubbles and oil droplets immersed in water inside a model flotator

Submission Author: Tiago Henrique Leitão Dalcuche , ES
Co-Authors: Tiago Henrique Leitão Dalcuche, Pedro Morales, Thiago Sirino, Henrique Stel, Moisés Marcelino Neto, Rigoberto Morales
Presenter: Pedro Morales

doi://10.26678/ABCM.COBEM2023.COB2023-0365

Waterflooding optimization by producer watercut using PSO algorithm

Submission Author: cuellar sanchez , DF
Co-Authors: Vinicius Rafael de Freitas, Mario Andrés Pastrana Triana, Lucas Moura Gomes, Emanuel Pereira Barroso Neto, cuellar sanchez, Eugenio Fortaleza, Rafael Valladares de Almeida
Presenter: cuellar sanchez

doi://10.26678/ABCM.COBEM2023.COB2023-2337

Numerical Investigation of Water Alternating Gas Injection Ratios on Multiphase Flow in Porous Media for Enhanced Oil Recovery

Submission Author: Vinicius Rafael de Freitas , DF
Co-Authors: Vinicius Rafael de Freitas, Adriano Rosa, Eugenio Fortaleza, Rafael Valladares de Almeida
Presenter: Vinicius Rafael de Freitas

doi://10.26678/ABCM.COBEM2023.COB2023-1594

Non-Newtonian flow displacement in well operations

Submission Author: Monica Naccache , RJ
Co-Authors: Debora Cristina Ferreira Da Silva, Monica Naccache, Victor Nogueira Lima, Hans Joakim Skadsem
Presenter: Paulo Roberto de Souza Mendes

doi://10.26678/ABCM.COBEM2023.COB2023-0273

Flows with Cavitation of Biodiesel in Pipelines

Submission Author: Elias Dias , RJ
Co-Authors: Elias Dias, Helcio Orlande, Italo Madeira, Marcelo Colaco
Presenter: Elias Dias

doi://10.26678/ABCM.COBEM2023.COB2023-2409

Numerical simulation of the influence of severe slugging on offshore production systems

Submission Author: Wayne Gabriel Nóbrega Firme , PB
Co-Authors: Wayne Gabriel Nóbrega Firme, Tony Herbert Freire de Andrade, Átyla Matheus de Araújo Costa, Paulo Vítor Silva Ramos, Phillipe Augusto Sales
Presenter: Phillipe Augusto Sales

doi://10.26678/ABCM.COBEM2023.COB2023-2024

Fuel Consumption Estimation for Offshore Support Vessels

Submission Author: Luiz Antonio Vaz Pinto , RJ
Co-Authors: Marlon Silva, Luiz Antonio Vaz Pinto, Ulisses Admar Barbosa Vicente Monteiro
Presenter: Marlon Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0053

Experimental identification of drag hydrodynamic parameters for an open frame ROV used in the stock assessment of scallops

Submission Author: Paola Fonseca , SP
Co-Authors: Paola Fonseca, RICHARD HUAMANI, Juan Pablo Julca Avila
Presenter: Paola Fonseca

doi://10.26678/ABCM.COBEM2023.COB2023-1394

Experimental investigation into the impact of stage number on the performance of ESP operating with a gas-liquid mixture.

Submission Author: Yan Capellaro , SP
Co-Authors: Yan Capellaro, William Monte Verde, Rafael Franklin Lazaro de Cerqueira, Julio Picinato Orssatto, Bernardo Foresti, Antonio Bannwart, Marcelo Souza de Castro
Presenter: Rafael Franklin Lazaro de Cerqueira

doi://10.26678/ABCM.COBEM2023.COB2023-0581

Parametric Analysis of the Annular Pressure Change Mitigation with Rupture Disks

Submission Author: Ianto Martins , SC
Co-Authors: Ianto Martins, Jader Riso Barbosa Jr.
Presenter: Jader Riso Barbosa Jr.

doi://10.26678/ABCM.COBEM2023.COB2023-1175

Circulating Water Channel for Investigations of Fluid-Structure Interactions in Low Reynolds Numbers

Submission Author: André Fujarra , SC
Co-Authors: Monique Ellen Bruner, Karen Soares, Felipe Rank Teixeira, André Fujarra, Rayza Yasmin Vicente Cenci
Presenter: Karen Soares

doi://10.26678/ABCM.COBEM2023.COB2023-1470

Experimental Investigation of the Rayleigh Damping Approximation in a Vibrating Catenary Pipe

Submission Author: André Fujarra , SC
Co-Authors: Lívia Rampinelli Bozzo, Thiago Antonio Fiorentin, Alexandre Mikowski, Andrea Piga Carboni, André Fujarra, Carlos Duarte de Lemos
Presenter: Lívia Rampinelli Bozzo

doi://10.26678/ABCM.COBEM2023.COB2023-1676

THE RHEOLOGICAL BEHAVIOR OF DRILLING FLUIDS AT HPHT CONDITIONS: A PROPOSAL FOR A CONSTITUTIVE EQUATION FITTING METHODOLOGY

Submission Author: Diogo Elias da Vinha Andrade , RS
Co-Authors: Diogo Elias da Vinha Andrade, LUIS HUMBERTO QUITIAN ARDILA, Admilson Franco
Presenter: Diogo Elias da Vinha Andrade

doi://10.26678/ABCM.COBEM2023.COB2023-2431

EVALUATING THE IMPACTS OF A NEURAL NETWORK TOPOLOGY ON ANCHOR RADIUS’ ESTIMATION IN MOORING LINES

Submission Author: Johne Trindade , SC
Co-Authors: Johne Trindade, Thiago Pontin Tancredi, BERNARDO LUIS RODRIGUES DE ANDRADE
Presenter: Johne Trindade

doi://10.26678/ABCM.COBEM2023.COB2023-0931

STUDY OF CALCIUM CARBONATE DEPOSITION INSIDE A PLATE HEAT EXCHANGER

Submission Author: Karolyna Gomes dos Santos , RJ
Co-Authors: Karolyna Gomes dos Santos, Jean Izidoro da Silva, Gabriel Siqueira Machado, Juliana Ferreira Gonçalves, Juliana Loureiro
Presenter: Karolyna Gomes dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1751

Application of a StoSAG Algorithm using a Modified Cost Function and Group Constraints in a Three-Phase Reservoir Model

Submission Author: Marco Antonio Nobre Rangel de Almeida , DF
Co-Authors: Marco Antonio Nobre Rangel de Almeida, Vinicius Rafael de Freitas, Emanuel Pereira Barroso Neto, cuellar sanchez, Eugenio Fortaleza, Rafael Valladares de Almeida
Presenter: Marco Antonio Nobre Rangel de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-1842

Study of inorganic fouling deposition in a hydrocyclone: comparison between numerical simulation and experimental results.

Submission Author: Andrei Hünemeyer Dullius , RJ
Co-Authors: Andrei Hünemeyer Dullius, Juliana Loureiro, Juliana Ferreira Gonçalves, Andressa Amorim Daás, Mariana Dominguez, Fabricio Silva
Presenter: Andrei Hünemeyer Dullius

doi://10.26678/ABCM.COBEM2023.COB2023-1167

Three-dimensional Navier-Stokes simulations of the displacement flow between miscible fluids with nonmonotonic viscosity profiles

Submission Author: Rafael Menezes de Oliveira , RJ
Co-Authors: Bruno Jorge Macedo dos Santos, Rafael Menezes de Oliveira
Presenter: Bruno Jorge Macedo dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0920

EXPERIMENTAL INVESTIGATION OLEFIN-BASED INVERTER DRILLING FLUIDS ON HPHT CONDITIONS: APPARENT VISCOSITY PREDICTION IN DIFFERENT OIL/ WATER RATIOS

Submission Author: LUIS HUMBERTO QUITIAN ARDILA , PR
Co-Authors: LUIS HUMBERTO QUITIAN ARDILA, GÉSSICA PALAORO, Diogo Elias da Vinha Andrade, Admilson Franco, Elessandre Souza, alex waldmann
Presenter: LUIS HUMBERTO QUITIAN ARDILA

doi://10.26678/ABCM.COBEM2023.COB2023-0364

PETRO-IPR: A Computational Tool for Inflow Performance Relationship Analysis

Submission Author: Antonio Marinho , SC
Co-Authors: Roberto Araujo Júnior, Mariana Costa, Antonio Marinho
Presenter: Roberto Araujo Júnior

doi://10.26678/ABCM.COBEM2023.COB2023-2034

Experimental investigation of emulsion flow at pore scale in fractured porous media

Submission Author: Marcio CARVALHO , RJ
Co-Authors: Alandmara Rosa Dionizio Leôncio, Ranena V. Ponce F., Marcio CARVALHO
Presenter: Alandmara Rosa Dionizio Leôncio

doi://10.26678/ABCM.COBEM2023.COB2023-1712

Calcium carbonate precipitation risk index for downhole completions: A combined thermodynamic, kinetic and CFD modeling approach

Submission Author: Vinicius Gustavo Poletto , PR
Co-Authors: Vinicius Gustavo Poletto , Thiago Machado Neubauer, Marina Elizabeth Mazuroski, Fernando Cesar De Lai, Silvio L. M. Junqueira, Bruno Castro , Andre Leibsohn Martins
Presenter: Vinicius Gustavo Poletto

doi://10.26678/ABCM.COBEM2023.COB2023-1770

Smart Materials and Structures

Bioinspired Systems 1

A Bioinspired Solar Tracker Actuated by Shape Memory Alloy

Submission Author: Guilherme Amaral do Prado Campos , RJ
Co-Authors: João Gabriel Andrade da Rocha, Guilherme Amaral do Prado Campos, Arthur Adeodato
Presenter: João Gabriel Andrade da Rocha

doi://10.26678/ABCM.COBEM2023.COB2023-1152

Magnetic Materials 2

Magnetic instability induced by a current-carrying wire of ferrofluids confined in a Hele-Shaw cell

Submission Author: Rafael Menezes de Oliveira , RJ
Co-Authors: Fabiano Carlos, Rafael Menezes de Oliveira
Presenter: Fabiano Carlos

doi://10.26678/ABCM.COBEM2023.COB2023-0911

Design and Optimization of an Electromagnetic Energy Harvester for Wireless Sensors Applications

Submission Author: Airton José Schmitt Junior , SC
Co-Authors: Airton José Schmitt Junior, Julio Cordioli, Danilo Braga
Presenter: Airton José Schmitt Junior

doi://10.26678/ABCM.COBEM2023.COB2023-2232

Nonlinear Dynamics of Smart Systems 2

A Prototype for Hybrid and Multidirectional Energy Harvesting using Pendulum Structures

Submission Author: Luã Guedes Costa , RJ
Co-Authors: Luã Guedes Costa, Marcelo Savi
Presenter: Luã Guedes Costa

doi://10.26678/ABCM.COBEM2023.COB2023-0655

EXPERIMENTAL ANALYSIS OF A SHAPE MEMORY ALLOY OSCILLATOR WITH DISCONTINUOUS SUPPORT

Submission Author: Vanderson Dornelas , RJ
Co-Authors: Vanderson Dornelas, Marcelo Savi, sergio oliveira
Presenter: Marcelo Savi

doi://10.26678/ABCM.COBEM2023.COB2023-0412

Piezoelectric Materials 1

Fault detection in a thick structure by using the ISHM technique

Submission Author: Fernanda Beatriz Aires de Freitas , RN
Co-Authors: Fernanda Beatriz Aires de Freitas, Larissa Pereira, Beatriz Marangoni, leandro stival, Valder Steffen Jr, Aldemir Ap Cavalini Jr
Presenter: Fernanda Beatriz Aires de Freitas

doi://10.26678/ABCM.COBEM2023.COB2023-0302

Shape Memory Alloys 6

Review of Ni-Mn-Ga Heusler alloy: Properties and Applications of Actuators with Magnetic Shape Memory

Submission Author: Kaline Ventura , PB
Co-Authors: Kaline Ventura, Julyana Quirino, Francisco Feitosa, Cícero da Rocha Souto
Presenter: Kaline Ventura

doi://10.26678/ABCM.COBEM2023.COB2023-1289

A Parametric Investigation of Low Velocity Impact in SMA-Composite Plates

Submission Author: Lucas Vignoli , RJ
Co-Authors: Lucas Vignoli, Arthur Adeodato
Presenter: Lucas Vignoli

doi://10.26678/ABCM.COBEM2023.COB2023-0612

PREISACH MODEL APPLIED TO THE THERMOMECHANICAL DESCRIPTION OF SHAPE MEMORY ALLOYS

Submission Author: Thiago Alvares , RJ
Co-Authors: Thiago Alvares, Vanderson Dornelas, Marcelo Savi, sergio oliveira
Presenter: Marcelo Savi

doi://10.26678/ABCM.COBEM2023.COB2023-2408

Experimental analysis of a smart soft beam actuated by SMA thin ribbon actuators

Submission Author: Antonio Holanda , PB
Co-Authors: Antonio Holanda, Carlos Jose de Araujo, Cícero da Rocha Souto
Presenter: Carlos Jose de Araujo

doi://10.26678/ABCM.COBEM2023.COB2023-0607

Analysis of Shape Memory Alloy Composites Using Micromechanical Models

Submission Author: Pedro Manuel Calas Lopes Pacheco , RJ
Co-Authors: Alencar Bernardino, Lucas Vignoli, Pedro Manuel Calas Lopes Pacheco, Marcelo Savi
Presenter: Lucas Vignoli

doi://10.26678/ABCM.COBEM2023.COB2023-0415

Stress Concentration Analysis in Pseudoelastic Thin Sheets using the Finite Element Method

Submission Author: Bruno Felippe Silva , RJ
Co-Authors: Bruno Felippe Silva, Luís Felipe Guimarães de Souza, Ricardo Alexandre Amar de Aguiar, Pedro Manuel Calas Lopes Pacheco
Presenter: Bruno Felippe Silva

doi://10.26678/ABCM.COBEM2023.COB2023-0759

Smart Systems 6

Development of Mechanical and Structural Design of a Transmission Tower Applied Energy for Structural Health Monitoring

Submission Author: Alexandre Carlos Rodrigues Ramos , SE
Co-Authors: Victor Emanuel Ribeiro de Santana, José Mascarenhas Lima Neto, Rodrigo Borges Santos, José Aguiar dos Santos Junior, Alexandre Carlos Rodrigues Ramos
Presenter: Rodrigo Borges Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1620

Machine Learning and Electromechanical Impedance Applied in the Structural Health Monitoring.

Submission Author: Daniel Ferreira Gonçalves , MG
Co-Authors: Daniel Ferreira Gonçalves, Fernanda Beatriz Aires de Freitas, Aldemir Ap Cavalini Jr, Roberto Mendes Finzi Neto, Valder Steffen Jr
Presenter: Daniel Ferreira Gonçalves

doi://10.26678/ABCM.COBEM2023.COB2023-1091

A TUBULAR ORIGAMI STRUCTURE BASED ON A NOVEL WATERPEACE PATTERN

Submission Author: Guilherme Vieira Rodrigues , RJ
Co-Authors: Guilherme Vieira Rodrigues, Daniel Kempinski, Marcelo Savi
Presenter: Guilherme Vieira Rodrigues

doi://10.26678/ABCM.COBEM2023.COB2023-0193

SHM based on the Electromechanical Impedance Technique with Temperature Variations: Theoretical and Experimental Approach

Submission Author: Lorena Lopes Dias , SP
Co-Authors: Lorena Lopes Dias, Douglas Bueno, Camila Gianini Gonsalez Bueno
Presenter: Lorena Lopes Dias

doi://10.26678/ABCM.COBEM2023.COB2023-1251

Nanocomposite Sensors of Indium Tin Oxide Nanowires in a PMMA Matrix for Structural Health Monitoring

Submission Author: Eduardo Preto , SP
Co-Authors: Eduardo Preto, Samuel da Silva, Marcelo Orlandi, Beatriz Ambrozini
Presenter: Eduardo Preto

doi://10.26678/ABCM.COBEM2023.COB2023-0093

Vibration Mitigation and Energy Harvesting with Bistable Resonators in Metamaterial Beams

Submission Author: João Pedro Canisso Valese Norenberg , MS
Co-Authors: João Pedro Canisso Valese Norenberg, Americo Barbosa da Cunha Junior
Presenter: Americo Barbosa da Cunha Junior

doi://10.26678/ABCM.COBEM2023.COB2023-1140

Solid Mechanics

Composite Materials and Structures 17

Comparing Tsai-Wu and Tsai-Hill Failure Criteria for High-Pressure Vessel Design under Uncertainty

Submission Author: Henrique Cordeiro Novais , SP
Co-Authors: Henrique Cordeiro Novais, Samuel da Silva, MARIANA ALVES, Carlos Alberto Cimini Junior
Presenter: Henrique Cordeiro Novais

doi://10.26678/ABCM.COBEM2023.COB2023-0262

Effective elastic properties of concrete by a 3D computational homogenization approach

Submission Author: Wanderson Ferreira dos Santos , GO
Co-Authors: Wanderson Ferreira dos Santos, Welington Hilário Vieira
Presenter: Wanderson Ferreira dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1161

Comparing DD and QUAD Laminates for Single Lap Joints

Submission Author: Lucas Vignoli , RJ
Co-Authors: Glosdemberger Alves, Lucas Vignoli, RANULFO MARTINS CARNEIRO NETO
Presenter: Lucas Vignoli

doi://10.26678/ABCM.COBEM2023.COB2023-0292

Influence of T-stress on the Processed Zone Around Crack Tip in CFRP Plates

Submission Author: Paulo Pedro Kenedi , RJ
Co-Authors: Daniel de Macedo Barreto Netto, Lucas Vignoli, Arthur Adeodato, Paulo Pedro Kenedi
Presenter: Lucas Vignoli

doi://10.26678/ABCM.COBEM2023.COB2023-1104

3D numerical simulation of carbon fiber composites with additive manufacturing structural core for industrial applications

Submission Author: Luiz Gustavo Santos Alberto , DF
Co-Authors: Luiz Gustavo Santos Alberto, Euclides Delgado Marques Santanna, Carla Anflor
Presenter: Luiz Gustavo Santos Alberto

doi://10.26678/ABCM.COBEM2023.COB2023-1395

Analysis of mesh types applied to the numerical modeling of a composite overwrapped pressure vessel

Submission Author: Lucas Agne , RS
Co-Authors: Lucas Agne, Estêvão Santos Laureano da Cunha, Henrique R. Mença, Sandro Amico, Maikson Luiz Passaia Tonatto
Presenter: Lucas Agne

doi://10.26678/ABCM.COBEM2023.COB2023-0198

Novel Implementation of Asymptotic Homogenization (NIAH) Applied to Frame-Like Periodic Materials

Submission Author: Pablo Andrés Muñoz Rojas , SC
Co-Authors: Augusto Henrique dos Santos, Pablo Andrés Muñoz Rojas
Presenter: Pablo Andrés Muñoz Rojas

doi://10.26678/ABCM.COBEM2023.COB2023-1663

A 3D constitutive model for modelling milling induced damage in composite laminates

Submission Author: Sergio Moni , SP
Co-Authors: Sergio Moni , Mauricio Donadon, Alfredo Faria
Presenter: Sergio Moni

doi://10.26678/ABCM.COBEM2023.COB2023-1793

EXPERIMENTAL STUDY ON THE ANISOTROPIC BEHAVIOR OF OPEN-HOLE GLASS/POLYESTER AND CARBON/EPOXY COMPOSITE SPECIMENS USING THE DIC TECHNIQUE

Submission Author: Ramon Rudá Brito Medeiros , Rio Grande do Norte
Co-Authors: Ramon Rudá Brito Medeiros, Letícia Graziele Silva Ribeiro, João Pedro Rodrigues Deodato, Rodrigo Nogueira de Codes, Zoroastro Vilar, Kelly Cristiane Gomes
Presenter: Rodrigo Nogueira de Codes

doi://10.26678/ABCM.COBEM2023.COB2023-0981

MEASUREMENT METHODOLOGIES FOR INVESTIGATING THE THERMAL BEHAVIOR OF A FERROUS MATRIX COMPOSITE REINFORCED BY CARBIDE OR NIOBIUM NITRIDE

Submission Author: Júlia Comunello , SC
Co-Authors: Júlia Comunello, Isadora Schramm Deschamps, Isadora Hasselmann Machado, Aloisio Nelmo Klein
Presenter: Isadora Hasselmann Machado

doi://10.26678/ABCM.COBEM2023.COB2023-2238

VSPKc Micromechanical Model - A Novel ROM-based Approach

Submission Author: Lucas Vignoli , RJ
Co-Authors: Lucas Vignoli, Marcelo Savi, Pedro Manuel Calas Lopes Pacheco, Alexander Kalamkarov
Presenter: Lucas Vignoli

doi://10.26678/ABCM.COBEM2023.COB2023-0731

Preliminary constituent analysis for the manufacture of a composite with active potential

Submission Author: João Pedro Rodrigues Deodato , CE
Co-Authors: João Pedro Rodrigues Deodato, Ramon Rudá Brito Medeiros, Talita Rebouças de Araújo Cortez, Michelle Queiroz Nunes , Zoroastro Vilar, Rodrigo Nogueira de Codes
Presenter: Rodrigo Nogueira de Codes

doi://10.26678/ABCM.COBEM2023.COB2023-1072

Effective fourth-order elasticity tensor of periodic porous materials by a 3D computational homogenization procedure

Submission Author: Wanderson Ferreira dos Santos , GO
Co-Authors: Wanderson Ferreira dos Santos, Sergio Persival Proenca
Presenter: Wanderson Ferreira dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0110

Analysis of the mechanical properties: Polyester composites versus polyester with aquatic macrophyte ashes

Submission Author: Fernanda Beatriz Aires de Freitas , RN
Co-Authors: Fernanda Beatriz Aires de Freitas, Nilson Francisco da Silva, Ana Claudia de Melo Caldas Batista, Daniel Freitas Freire Martins
Presenter: Fernanda Beatriz Aires de Freitas

doi://10.26678/ABCM.COBEM2023.COB2023-0717

A study of the effects of post-design fiber reinforcements in structural response of metallic trusses

Submission Author: Bárbara Minosso , RS
Co-Authors: Bárbara Minosso, Rogério Marczak
Presenter: Bárbara Minosso

doi://10.26678/ABCM.COBEM2023.COB2023-1831

Algorithm implementation for automated modeling of a composite structure

Submission Author: Iuri Hermes Müller , RS
Co-Authors: Iuri Hermes Müller, Maikson Luiz Passaia Tonatto, Sandro Amico, Pedro Lucas Carvalho
Presenter: Iuri Hermes Müller

doi://10.26678/ABCM.COBEM2023.COB2023-2040

Effect of graphene content on the mechanical properties of graphene reinforced aluminum matrix composites

Submission Author: Fellipe Fiorelli Talamini , RS
Co-Authors: Fellipe Fiorelli Talamini, Tiago dos Santos, Natalia Daudt, Maria José Silva Carvalho
Presenter: Fellipe Fiorelli Talamini

doi://10.26678/ABCM.COBEM2023.COB2023-1791

Elasticity, Plasticity, Damage and Fracture Mechanics: Models, Experiments and Applications 15

Full isotropic yield surfaces for porous ductile materials by computational homogenization

Submission Author: Wanderson Ferreira dos Santos , GO
Co-Authors: Wanderson Ferreira dos Santos, Ayrton Ribeiro Ferreira, Sergio Persival Proenca
Presenter: Wanderson Ferreira dos Santos

doi://10.26678/ABCM.COBEM2023.COB2023-0105

ON THE EVALUATION OF ELATOPLASTIC STRESSES DISTRIBUTION AROUND A CRACK TIP

Submission Author: Mateus Bastos Neiva , RJ
Co-Authors: Mateus Bastos Neiva, Carlos Alberto de Almeida, Ivan Menezes
Presenter: Carlos Alberto de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-1520

ASSESSMENT OF CORRELATION BETWEEN SIMULATIONS AND STANDARDIZED TESTS OF THERMOPLASTICS FROM DIFFERENT TRUE STRESS-STRAIN EQUATIONS

Submission Author: Paulo de Souza Silva , SP
Co-Authors: Paulo de Souza Silva, Gabriel Ramos Ferreira, Luciano Santos da Silva, Gimaezio Gomes Carvalho, Ronei Santos Maciel, Egidio Veronese Junior
Presenter: Gabriel Ramos Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-0276

A COMPARATIVE EVALUATION OF A SUITABLE CONSTITUTIVE MODEL FOR THERMOPLASTICS WITH ONE BASED ON THE VON MISES CRITERION

Submission Author: Gabriel Ramos Ferreira , SP
Co-Authors: Gabriel Ramos Ferreira, Paulo de Souza Silva, Luciano Santos da Silva, Gimaezio Gomes Carvalho, Ronei Santos Maciel, Egidio Veronese Junior
Presenter: Gabriel Ramos Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-0278

3D Finite Elements Analysis through Beam-to-Beam Contacts on Transmission Line Conductors

Submission Author: Bruno Pedrosa , DF
Co-Authors: Bruno Pedrosa, JOSE ALEXANDER ARAUJO, JORGE FERREIRA, Remy Kalombo Badibanga, LUIS VELOSO
Presenter: Bruno Pedrosa

doi://10.26678/ABCM.COBEM2023.COB2023-1614

Permanent Regime Configurations for Orthogonal Cutting Analysis by Limit Analysis

Submission Author: Luísa de Amorim Makhoul Gomes , RJ
Co-Authors: Luísa de Amorim Makhoul Gomes , Lavinia Maria Alves Borges, Fabio da Costa Figueiredo, Adriane Mougo
Presenter: Luísa de Amorim Makhoul Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-1943

A continuum theory for evaluating the impact of stress on the kinetics of hydrogen uptake and release in metal hydrides

Submission Author: Antônio da Cruz , PA
Co-Authors: Natanaele Soares Medeiros, Antônio da Cruz, Angela Cristina Cardoso de Souza, Fernando Pereira Duda
Presenter: Natanaele Soares Medeiros

doi://10.26678/ABCM.COBEM2023.COB2023-2276

J-Integral study in hyperelastic material submitted to a mode I fracture loading

Submission Author: Lucas Macedo Barboza , RJ
Co-Authors: Lucas Macedo Barboza, João Carlos Andrade de Deus Filho, Luiz Nunes
Presenter: Lucas Macedo Barboza

doi://10.26678/ABCM.COBEM2023.COB2023-0200

Morphological properties evaluation of porous and anisotropic materials

Submission Author: Lívia Nogueira , RJ
Co-Authors: Lívia Nogueira, Lavinia Maria Alves Borges, DANIEL CASTELLO
Presenter: Lívia Nogueira

doi://10.26678/ABCM.COBEM2023.COB2023-1638

The use of modern instruments in structural analysis : A review of DIC and FBG sensors.

Submission Author: Vinicius Vieira , SP
Co-Authors: Vinicius Vieira, Rodolpho Gardenal Fabbre, Bruno Agostinho Hernandez, EDSON CAPELLO SOUSA, Marcelo Sampaio Martins
Presenter: Bruno Agostinho Hernandez

doi://10.26678/ABCM.COBEM2023.COB2023-1544

PHYSICS-INFORMED NEURAL NETWORKS FOR SOLVING ELASTICITY PROBLEMS

Submission Author: Estevão Fuzaro de Almeida , SP
Co-Authors: Estevão Fuzaro de Almeida, Samuel da Silva, Americo Barbosa da Cunha Junior
Presenter: Estevão Fuzaro de Almeida

doi://10.26678/ABCM.COBEM2023.COB2023-0310

Numerical investigation of non-smooth solutions in finite elasticity

Submission Author: Lucas Rocha , SP
Co-Authors: Adair Aguiar, Lucas Rocha
Presenter: Lucas Rocha

doi://10.26678/ABCM.COBEM2023.COB2023-1179

Strain analysis of specimens subject to tensile test using open-source Digital Image Correlation Systems

Submission Author: Antônio Maia , MG
Co-Authors: Guilherme Ramiro, Nathália Mello Mascarenhas Paixão, ALEXANDRE SCARI, Almir Silva Neto, Lázaro Donadon, Antonio Avila, Antônio Maia
Presenter: Guilherme Ramiro

doi://10.26678/ABCM.COBEM2023.COB2023-0884

Fatigue life calculation using incremental damage

Submission Author: Gabriel Hofmam , DF
Co-Authors: Gabriel Hofmam, Lucival Malcher
Presenter: Gabriel Hofmam

doi://10.26678/ABCM.COBEM2023.COB2023-1038

Statistical comparison of Taguchi method and full factorial on the quality of drilling on FRP composite

Submission Author: Felipe Brum Rossato , SC
Co-Authors: Felipe Brum Rossato, Jhonatan Acacio Silva, Gabriel Flores, Hector Perdoncini, Rodrigo Sant'Ana
Presenter: Felipe Brum Rossato

doi://10.26678/ABCM.COBEM2023.COB2023-1873

Fatigue and Failure Analyses 2

Improving chassi kart structure considering fatigue, modal and static analyses through Finite Element Analysis

Submission Author: Giuliano Mesquita , DF
Co-Authors: Giuliano Mesquita, Euclides Delgado Marques Santanna, Carla Anflor
Presenter: Euclides Delgado Marques Santanna

doi://10.26678/ABCM.COBEM2023.COB2023-1399

FAULT ANALYSIS IN ROAD SPRINTER OM611

Submission Author: Magno Caetano , MG
Co-Authors: Magno Caetano , Ronalty Rios, Claysson Vimieiro, JORDANA MARTINS
Presenter: Claysson Vimieiro

doi://10.26678/ABCM.COBEM2023.COB2023-1478

Numerical Methods: FEM, XFEM, GFEM, BEM and other methods 16

A positional FEM formulation for geometrically nonlinear analysis of laminated plates and shells: regularization of transverse normal and shear stresses

Submission Author: Vinícius Souza , SP
Co-Authors: Vinícius Souza, Humberto Coda
Presenter: Vinícius Souza

doi://10.26678/ABCM.COBEM2023.COB2023-0810

Parameter estimation for discrete element methods (DEM) in the simulation of iron ore flow

Submission Author: José Cléber Rodrigues da Silva , PA
Co-Authors: José Cléber Rodrigues da Silva, Rogério Marczak
Presenter: José Cléber Rodrigues da Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2088

Using an Inverse Method Based on Deep Learning to Obtain Shear Parameters to Optimize a Shear-Displacement Finite Element Solution

Submission Author: Luana Claudia Bertoncello , PR
Co-Authors: Luana Claudia Bertoncello, Francisco Augusto Aparecido Gomes, Robson Gonçalves Trentin, Paulo Rogério Novak
Presenter: Luana Claudia Bertoncello

doi://10.26678/ABCM.COBEM2023.COB2023-1389

Expansion of a non-intrusive implementation of the Generalized Finite Element Method - Global-Local

Submission Author: Ana Clara Pedras Bueno , MG
Co-Authors: Ana Clara Pedras Bueno, FELICIO BARROS, Neimar Aparecido da Silveira Filho
Presenter: Ana Clara Pedras Bueno

doi://10.26678/ABCM.COBEM2023.COB2023-1562

DESIGN OF SHAPE FUNCTIONS FOR ELIMINATING THE GIBBS PHENOMENON

Submission Author: Francisco Alex Monteiro , SP
Co-Authors: Eliseu Lucena Neto, Francisco Alex Monteiro, Sérgio Cordeiro
Presenter: Sérgio Cordeiro

doi://10.26678/ABCM.COBEM2023.COB2023-1504

The Enriched Modified Local Green’s Function Method applied to static fracture mechanic problems

Submission Author: Ramon Macedo Corrêa , PR
Co-Authors: Ramon Macedo Corrêa, Marcos Arndt, ROBERTO Dalledone Machado
Presenter: Ramon Macedo Corrêa

doi://10.26678/ABCM.COBEM2023.COB2023-0112

Static Stiffness Correlation of Elastomeric Bushings using Finite Element Analysis

Submission Author: Luiz Felipe Sallani Simioni , SP
Co-Authors: Luiz Felipe Sallani Simioni, Wallace Ferreira, Fernando Santos
Presenter: Luiz Felipe Sallani Simioni

doi://10.26678/ABCM.COBEM2023.COB2023-0660

A three-dimensional numerical model for thermoplastic welding process

Submission Author: Daniel Bernardes de Castro , SP
Co-Authors: Daniel Bernardes de Castro, Mariano Arbelo, Mauricio Donadon
Presenter: Mariano Arbelo

doi://10.26678/ABCM.COBEM2023.COB2023-1799

Isogeometric Analysis in solid mechanics: exploring precision and versatility

Submission Author: Beatriz Corchak Veiga , PR
Co-Authors: Beatriz Corchak Veiga, ROBERTO Dalledone Machado
Presenter: Beatriz Corchak Veiga

doi://10.26678/ABCM.COBEM2023.COB2023-1358

Application of design of experiments and dimensonal analysis for multi-material cantilever beam characterization

Submission Author: Eduardo Telli , RS
Co-Authors: Eduardo Telli, Daniel Milbrath De Leon, Ignacio Iturrioz, Gustavo Prates Mezzomo
Presenter: Eduardo Telli

doi://10.26678/ABCM.COBEM2023.COB2023-1149

Convergence studies in elasticity with an independent basis isogeometric boundary element formulation

Submission Author: Sérgio Cordeiro , SP
Co-Authors: Sérgio Cordeiro, Francisco Alex Monteiro, Guilherme Henrique Teixeira
Presenter: Sérgio Cordeiro

doi://10.26678/ABCM.COBEM2023.COB2023-1518

Improving Accuracy with Isogeometric Boundary Element Method (IGABEM): Applications in Potential Theory and Linear Elasticity

Submission Author: Deborah Cristina Nardi , SP
Co-Authors: Deborah Cristina Nardi, Edson Denner Leonel
Presenter: Deborah Cristina Nardi

doi://10.26678/ABCM.COBEM2023.COB2023-0724

The Use of Cells for Accurate Body Forces Modelling in the Isogeometric Boundary Element Method (IGABEM): Comparison with the Galerkin Vector Approach and Insights for Nonlinear Problems.

Submission Author: Deborah Cristina Nardi , SP
Co-Authors: Deborah Cristina Nardi, Edson Denner Leonel
Presenter: Deborah Cristina Nardi

doi://10.26678/ABCM.COBEM2023.COB2023-0722

ANALYSIS OF ENRICHMENT FUNCTIONS IN FEM FOR SIMULATING CRACKED SHEET METAL

Submission Author: Gustavo Alves Lima , ES
Co-Authors: Gustavo Alves Lima, Carlos Barcellos, WERLEY FACCO
Presenter: Gustavo Alves Lima

doi://10.26678/ABCM.COBEM2023.COB2023-1752

DEVELOPMENT OF A PYTHON SCRIPT FOR STRUCTURAL ANALYSIS BASED ON THE FINITE ELEMENT THEORY

Submission Author: Roberto Wagner Bressan Junior , SP
Co-Authors: Dawson Tadeu Izola, Roberto Wagner Bressan Junior
Presenter: Roberto Wagner Bressan Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0206

Modeling of Functionally Graded Material (FGM) plates bending via GFEM

Submission Author: Bruno Pereira Santos , SC
Co-Authors: Bruno Pereira Santos, Paulo de Tarso Mendonça
Presenter: Paulo de Tarso Mendonça

doi://10.26678/ABCM.COBEM2023.COB2023-2128

Optimization of Materials, Fluids and Structures 8

An Educational MATLAB Code for Topology Optimization of Thick-Thin Plates using Arbitrary Polygonal Meshes

Submission Author: Diego Santos Duarte , BA
Co-Authors: Diego Santos Duarte, Ivan Menezes
Presenter: Diego Santos Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-1154

Optimizing Isogrid Structures for Multiple Performance Criteria: An Experimental Study

Submission Author: Guilherme Ferreira Gomes , MG
Co-Authors: Adrien Noël , Rafael Augusto Gomes, Guilherme Ferreira Gomes
Presenter: Guilherme Ferreira Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0189

An implementation of the TOBS method for topology optimization of large-scale 3D structures

Submission Author: Lucas Mamedes , DF
Co-Authors: Lucas Mamedes, Renato Picelli, Josue Labaki
Presenter: Lucas Mamedes

doi://10.26678/ABCM.COBEM2023.COB2023-2372

OPTIMIZING TRUSS STRUCTURES WITH NATURAL FREQUENCY CONSTRAINTS USING THE CROSS-ENTROPY METHOD

Submission Author: Marcos Vinicius dos Santos Issa , RJ
Co-Authors: Marcos Vinicius dos Santos Issa, Americo Barbosa da Cunha Junior, Francisco José Soeiro, Anderson Pereira
Presenter: Marcos Vinicius dos Santos Issa

doi://10.26678/ABCM.COBEM2023.COB2023-1117

MULTI-MATERIAL TOPOLOGY OPTIMIZATION WITH SIMP FORMULATION AND HEAVISIDE THRESHOLD FUNCTION FILTER

Submission Author: Herbert Gomes , RS
Co-Authors: Artur Lagemann, Herbert Gomes
Presenter: Herbert Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-1092

TOPOLOGICAL DERIVATIVE IN THE TOPOLOGY OPTIMIZATION OF ARCH-GRAVITY DAMS

Submission Author: Lucas Duarte , RJ
Co-Authors: Lucas Duarte, Marcel Xavier
Presenter: Lucas Duarte

doi://10.26678/ABCM.COBEM2023.COB2023-0527

Topology optimization of compliant mechanisms subjected to harmonic loads.

Submission Author: Valéria Farias da Luz , SC
Co-Authors: Valéria Farias da Luz, Olavo M. Silva, Eduardo Lenz Cardoso
Presenter: Valéria Farias da Luz

doi://10.26678/ABCM.COBEM2023.COB2023-0320

Evolutionary Topology Optimization of Pressure-actuated Compliant Mechanisms

Submission Author: Vitor Hugo Lima , SP
Co-Authors: Vitor Hugo Lima, Claudia Marcela Perez Madrid, Heitor Nigro Lopes, Daniel Candeloro Cunha, Renato Pavanello
Presenter: Vitor Hugo Lima

doi://10.26678/ABCM.COBEM2023.COB2023-0285

Structural Reliability Methods and Reliability-Based Design Optimization 2

Stochastic Optimization of a Rotating Machine Through Reliability-Based Design Optimization

Submission Author: Eduardo Henrique de Paula , SP
Co-Authors: Eduardo Henrique de Paula, Helio Fiori de Castro
Presenter: Eduardo Henrique de Paula

doi://10.26678/ABCM.COBEM2023.COB2023-1136

Improved stochastic modeling of hygrothermal influences on the buckling response of laminated composite plates

Submission Author: Henrique Santos , SP
Co-Authors: Henrique Santos, Domingos Rade
Presenter: Henrique Santos

doi://10.26678/ABCM.COBEM2023.COB2023-1105

Structural Statics and Dynamics 11

Experimental investigation on energy absorption of auxetic tubes under quasi-static compression loads

Submission Author: Rafael Augusto Gomes , MG
Co-Authors: Adrien Noël , Rafael Augusto Gomes, Lucas Antonio de Oliveira, Matheus Brendon Francisco, Guilherme Ferreira Gomes
Presenter: Rafael Augusto Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0196

A New Family of Auxetic Beams: The Elliptical S-Chiral Design Investigation

Submission Author: Antonio Avila , MG
Co-Authors: Nathália Mello Mascarenhas Paixão, Paulo César de Matos Rodrigues, ALEXANDRE SCARI, Almir Silva Neto, Antônio Maia, Lázaro Donadon, Antonio Avila
Presenter: Nathália Mello Mascarenhas Paixão

doi://10.26678/ABCM.COBEM2023.COB2023-0832

STRUCTURAL DESIGN OF AN UNDERGROUND HERMETIC AND PRESSURIZED SUBSTATION FOR TRANSFORMING ELECTRIC ENERGY

Submission Author: Pedro Pio Rosa Nishida , MG
Co-Authors: Pedro Pio Rosa Nishida, Arthur Antunes, Ivan Nunes Santos, Julliano Henrique Santos de Faria, Luís Manoel de Paiva Souza
Presenter: Luís Manoel de Paiva Souza

doi://10.26678/ABCM.COBEM2023.COB2023-2061

STUDY ON THERMOMECHANICAL BEHAVIOR OF COOLED DIE APPLIED TO HOT STAMPING PROCESS

Submission Author: Caio Grisotto , SP
Co-Authors: Caio Grisotto, Gregory Bregion Daniel
Presenter: Gregory Bregion Daniel

doi://10.26678/ABCM.COBEM2023.COB2023-1489

Structural analysis of maritime fenders.

Submission Author: Yuri Fernandes , MA
Co-Authors: Yuri Fernandes, Vilson Souza Pereira, Dalmo Inacio Galdêz Costa
Presenter: Yuri Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-1239

ANALYSIS OF AEROELASTIC STABILITY OF VISCOELASTIC SANDWICH PANELS IN SUBSONIC REGIME USING THE NONPLANAR DOUBLET-LATTICE METHOD

Submission Author: Bruno Sousa Carneiro da Cunha , MG
Co-Authors: Bruno Sousa Carneiro da Cunha, Antonio Marcos de Lima
Presenter: Bruno Sousa Carneiro da Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-1550

Aerostatic bearing application for rotating machines

Submission Author: Rodolfo Silva , RJ
Co-Authors: Rodolfo Silva, Paulo Farias
Presenter: Rodolfo Silva

doi://10.26678/ABCM.COBEM2023.COB2023-2320

Modal analysis of a damaged beam with variation of crack geometric parameters

Submission Author: Yuri Fernandes , MA
Co-Authors: Hudson Douglas Silva Morais, Yuri Fernandes, Dalmo Inacio Galdêz Costa, Vilson Souza Pereira
Presenter: Yuri Fernandes

doi://10.26678/ABCM.COBEM2023.COB2023-1297

DYNAMIC ANALYSIS OF RAILWAYS TRACKS USING THE SPECTRAL ELEMENT METHOD: A LATTICE-STRUCTURE-BASED APPROACH

Submission Author: Pedro Augusto Beck , MS
Co-Authors: Pedro Augusto Beck, Geder Gabriel Louback Cunha , Douglas Bueno, Rodrigo Borges Santos
Presenter: Geder Gabriel Louback Cunha

doi://10.26678/ABCM.COBEM2023.COB2023-0157

Exploring the Vibration Characteristics of Auxetic Tubular Structures: An experimental analysis

Submission Author: Rafael Augusto Gomes , MG
Co-Authors: Adrien Noël , Rafael Augusto Gomes, Lucas Antonio de Oliveira, Sebastião Simoes Cunha Jr, Guilherme Ferreira Gomes
Presenter: Sebastião Simoes Cunha Jr

doi://10.26678/ABCM.COBEM2023.COB2023-0195

Numerical Investigation of Cross Influence between Piles in the Dynamic Behavior of Pile Foundations

Submission Author: Amanda Oliveira , MA
Co-Authors: Amanda Oliveira, Pérsio Leister de Almeida Barros, Josue Labaki
Presenter: Amanda Oliveira

doi://10.26678/ABCM.COBEM2023.COB2023-0219

Viscoelasticity and Viscoplasticity: Models, Experiments and Applications 6

Structural analysis of an ore belt conveyor’s polymeric roller considering viscoelastic effects

Submission Author: Rafiq Said Dias Jabour , PR
Co-Authors: Rafiq Said Dias Jabour, Marco Antonio Luersen
Presenter: Rafiq Said Dias Jabour

doi://10.26678/ABCM.COBEM2023.COB2023-0345

Determination of the reinforcement steel area in pure bending considering the stress-strain diagram with the creep of concrete

Submission Author: Alexandre de Macêdo Wahrhaftig , BA
Co-Authors: Alexandre de Macêdo Wahrhaftig, Rodrigo Oliveira da Silva Conceição , Iago Gonçalves de Oliveira, Cibele Mota Menezes
Presenter: Cibele Mota Menezes

doi://10.26678/ABCM.COBEM2023.COB2023-0456

VIBRATION ATTENUATION IN COMPOSITE MATERIALS BY VISCOELASTIC MATERIALS

Submission Author: Herbert Gomes , RS
Co-Authors: Herbert Gomes, Alexandre Löw
Presenter: Herbert Gomes

doi://10.26678/ABCM.COBEM2023.COB2023-0190

ANALYTICAL SOLUTIONS FOR THE FOUR PARAMETER BURGERS MODEL USING THE GENERALIZED INTEGRATING FACTOR

Submission Author: Matheus Janczkowski Fogaça , SC
Co-Authors: Matheus Janczkowski Fogaça, Rogério Marczak, Eduardo Lenz Cardoso
Presenter: Matheus Janczkowski Fogaça

doi://10.26678/ABCM.COBEM2023.COB2023-1543

Numerical analysis of dissipation in a large strain thermo-viscoelastic constitutive model

Submission Author: Péricles Rafael Pavão Carvalho , MA
Co-Authors: Péricles Rafael Pavão Carvalho, Rodolfo Sanches
Presenter: Péricles Rafael Pavão Carvalho

doi://10.26678/ABCM.COBEM2023.COB2023-2181

Numerical Thermomechanical Analysis of a Composite Sandwich Beam

Submission Author: Lucas Antonio de Oliveira , MG
Co-Authors: Lucas Antonio de Oliveira, Rafael Augusto Gomes, Matheus Brendon Francisco, Guilherme Ferreira Gomes, Sebastião Simoes Cunha Jr
Presenter: Sebastião Simoes Cunha Jr

doi://10.26678/ABCM.COBEM2023.COB2023-0211

Wave Propagation 2

Wave attenuation using 2-D metamaterial thin plates with shunted piezo-patches

Submission Author: Edson Jansen Pedrosa de Miranda Junior , MA
Co-Authors: Edson Jansen Pedrosa de Miranda Junior, Jose Maria Campos dos Santos, Amilton Sinatora
Presenter: Edson Jansen Pedrosa de Miranda Junior

doi://10.26678/ABCM.COBEM2023.COB2023-0844

A Study on the Rayleigh Wave Attenuation Provided by Gabion Mats using a Coupled IBEM-FEM Model

Submission Author: Leonardo Antoniazzi Marques , SP
Co-Authors: Leonardo Antoniazzi Marques, David Andrade Soares Carneiro, Josue Labaki
Presenter: Leonardo Antoniazzi Marques

doi://10.26678/ABCM.COBEM2023.COB2023-0124

Uncertainty Quantification and Stochastic Modeling

Probabilistic Modelling and Analysis, Simulation, and Soft Computing 3

Uncertainty in rotordynamics: A SOBOL’s sensitivity analysis approach

Submission Author: Guilherme Lacerda , RJ
Co-Authors: Guilherme Lacerda, Thiago Ritto
Presenter: Guilherme Lacerda

doi://10.26678/ABCM.COBEM2023.COB2023-0342

RELIABILITY ESTIMATION OF CRACK PROPAGATION IN A ROTATING MACHINE SHAFT USING BAYESIAN DEEP LEARNING

Submission Author: Matheus de Moraes , SP
Co-Authors: Matheus de Moraes, Douglas Kohatsu, Joao P. Dias, Helio Fiori de Castro
Presenter: Helio Fiori de Castro

doi://10.26678/ABCM.COBEM2023.COB2023-1451

Vulnerability of a guyed lightweight steel tower to extreme lateral loads

Submission Author: Crystian Daniel Paz , PR
Co-Authors: Crystian Daniel Paz, Rúbia Bosse, Joao Lucas Salvador de Araujo, Gustavo de Miranda Saleme Gidrão
Presenter: Crystian Daniel Paz

doi://10.26678/ABCM.COBEM2023.COB2023-1512

Risk Analysis and Risk Management 2

RISK ANALYSIS IN BELT CONVEYOR PROJECTS

Submission Author: Camila Stephanie Ferreira , SP
Co-Authors: Camila Stephanie Ferreira, LUIS FERNANDO MOURA
Presenter: Camila Stephanie Ferreira

doi://10.26678/ABCM.COBEM2023.COB2023-0483

Epistemic uncertainties and their role in optimal design of engineering systems

Submission Author: Andre Beck , SP
Co-Authors: Andre Beck
Presenter: Andre Beck

doi://10.26678/ABCM.COBEM2023.COB2023-0044

Uncertainty Identification, Quantification, and Reduction 1

MODEL VALIDATION WITH CLASSICAL AND BAYESIAN HYPOTHESIS TESTING UNDER EPISTEMIC UNCERTAINTY.

Submission Author: João Henrique Camargo , SP
Co-Authors: João Henrique Camargo, Helio Fiori de Castro
Presenter: João Henrique Camargo

doi://10.26678/ABCM.COBEM2023.COB2023-1315

‹ voltar para anais de eventos ABCM

REDEFINIR SENHA