Papers  List :    Materials Science

PRODUÇÃO DA MADEIRA PLASTIFICADA DE ELEVADA RESISTÊNCIA À FLEXÃO ESTÁTICA MEDIANTE POLIMERIZAÇÃO INDUZIDA POR RAIOS GAMA

DESENVOLVIMENTO DE UMA GERADORA DE ESFERAS DE CERÂMICA PARA PRÓTESES DE QUADRIL

ADDITION OF MO E W TO ALTERNATIVE THERMORESISTIVE ALLOYS BASED ON FE-AL-SI-NB.

GRANITO SINTÉTICO PARA ESTRUTURAS DE EQUIPAMENTOS DE PRECISÃO DE PEQUENO PORTE - METODOLOGIA DE PROJETO

MECHANICAL BEHAVIOR OF A WARM-ROLLED VANADIUM MICROALLOYED MEDIUM CARBON STEEL

CHANGES OF THE MECHANICAL PROPERTIES IN POLYOXYMETHYLENE – POM RECYCLING PROCESS

STUDY OF THE INFLUENCE OF SAND PERCENTAGE IN CLAY-SAND MIXTURES ON THE DRYING PROCESS OF CERAMIC MATERIALS

O PROCESSO DE COLAGEM DE BARBOTINA SOB PRESSÃO, SOB A ÓTICA DA TEORIA GERAL DE FILTRAÇÃO

MORPHOLOGY OF POLYMER FILMS OF POLYVINYL CHLORIDE/POLYAMIDE-6 BLENDS

DESENVOLVIMENTO E CARACTERIZAÇÃO DE ESPUMAS RÍGIDAS, COM POROS INTERCOMUNICANTES E SUA APLICAÇÃO COMO MEIOS FILTRANTES

WEAR OF HIGH DENSITY POLYETHYLENE APPLIED IN THE PRODUCTION OF TUBES FOR EXTRACTION OF PETROLEUM

MICROFABRICATION OF HIGH-ASPECT-RATIO MICROSTRUCTURES BY LIGA TECHNOLOGY (LITHOGRAPHY, ELECTROFORMING AND MOLDING)

PROPRIEDADES MECÂNICAS E MECANISMO DE DANO EM COMPÓSITOS FIBROSO TIPO SANDWICH

DEVELOPMENT OF FIBERGLASS REINFORCED EPOXI AND ALUMINA COMPOSITE PLATES FOR BALLISTIC PROTECTION

OPTIMIZATION OF COMPOSITE SHELLS

STUDY OF PLATE ELEMENTS APPLIED TO COMPOSITE MATERIALS

TIME-DEPENDENT RESPONSE OF A RUBBER-TOUGHENED CARBON/EPOXY COMPOSITE WITH DAMAGE ACCUMULATION

THE EFFECT OF THE FIBER ORIENTATION ON THE DYNAMIC BEHAVIOUR OF MULTI-LAYER PLATES

THEORETICAL AND EXPERIMENTAL DYNAMIC ANALYSIS OF FIBER REINFORCED COMPOSITE BEAMS

BEHAVIOR AND STRENGTH OF REINFORCED CONCRETE BEAMS WITH THE ADDITION OF SHORT STEEL FIBERS

ALUMINIUM BASE COMPOSITE REINFORCED WITH NI3AL INTERMETALLIC BY POWDER METALLURGY: MICROSTRUCTURAL, MECHANICAL AND CORROSION CHARACTERIZATION.

ANÁLISE EXPERIMENTAL DO COMPORTAMENTO MECÂNICO DE VIGAS LAMINADAS HÍBRIDAS MADEIRA/PLÁSTICO REFORÇADO.

A REFINED MULTI-LAYER SHELL ELEMENT USING A MINDLIN´S THEORY EVOLUTION

THE EFFECTS OF MECHANICAL ALLOYING ON THE EXTRUSION PROCESS OF AA 6061 ALLOY REINFORCED WITH SI3N4

A NUMERICAL APPROACH ON DETERMINIG THE TORSIONAL STIFFNESS OF COMPLEX CROSS SECTIONS

AL/SIO2 FIBROUS COMPOSITE OBTAINED BY POWDER METALLURGY

THE EFFECT OF THE FIBER ORIENTATION ON THE DYNAMIC BEHAVIOUR OF ROTORS IN WOUNDING-SHAFT

NANOINDENTAÇÃO EM AMOSTRAS INOXIDÁVEIS COM EFEITO DE MEMÓRIA DE FORMA

ANYSOTROPY INDEXES DETERMINATION IN HSLA STEELS

MECHANICAL PROPERTIES OF COTTON FIBERS USED ON OPEN-END SPINNING TO MAKE DENIM FABRIC: CASE STUDY AT TEXTILE INDUSTRIES IN CEARÁ.

AUTOMATED TESTING SYSTEM FOR OVERHEAD LINE CABLES

TOUGHNESS ANISOTROPY IN HSLA STEELS

THE INFLUENCE OF CHEMICAL COMPOSITION OF HIGH-SPEED STEELS ON THE WEAR DURING CUTTING AND EROSION TESTS

TENSION RESISTANCE OF LAMINATED COMPOSITE OF ALUMINUM WITH EPOXY RESIN REINFORCED BY GLASS FIBERS

SOME ASPECTS OF MECHANICAL BEHAVIOUR OF CYCLICALLY-LOADED GRADE II TITANIUM

APPLICATION OF NEURAL NETWORKS IN STEELS CHEMICAL COMPOSITION DESIGN

LOW - CYCLE FATIGUE. CYCLIC PROPERTIES OF AN AL 6061-T651

MECHANICAL PROPERTIES OF MULTILAYER COATINGS BY NANOINDENTATION METHOD

A Influência das Partículas de Segunda Fase nas Propriedades Mecânicas da Liga de Alumínio 7050

DETERMINATION OF EUTECTOIDS STEELS MECHANICAL PROPERTIES AND COSTS

EFFECT OF THE STRAIN PATH IN THE STRAIN HARDENING OF THE STEEL AND BRASS DEFORMED IN TENSION AND TORSION

ABNT M2 HIGH SPEED STEEL HEAT TREATMENT.

INFLUÊNCIA DA SOLUBILIZAÇÃO NAS PROPRIEDADES MAGNÉTICAS DE LIGAS FE-11MO-5NI-0,05C