Eventos Anais de eventos
MecSol 2017
6th International Symposium on Solid Mechanics
NUMERICAL SIMULATION OF BOLTED CONNECTIONS
Submission Author:
Paula Vilela , MG
Co-Authors:
hermes carvalho, Gilson Queiroz
Presenter: Paula Vilela
doi://10.26678/ABCM.MecSol2017.MSL17-0067
Abstract
This article presents the modeling of a complete bolted connection based on a model with one bolt connecting two or three plates. Initially, the behavior of this model with one bolt is analyzed by comparing it with existing bibliography for 3 different types of applied load: tension, shear and a combination of these two. This model includes all necessary considerations: contacts between the plates and the nut, head and shank of the bolt; contact between the plates, as well as friction between them; and pre-load on the bolt. The model also responds properly to loads parallel and perpendicular to the contact surface between the plates, including prying action effects. These calibrated models are then introduced as super-elements in empty spaces left on the full connection, through a relatively simple process using the finite element software ANSYS. Upon filling these spaces, two complete connection models will be evaluated: one with a single plate and one between two T-stubs. The results obtained with these models will be compared with experimental tests existing in the literature, consisting basically in load-deformation and ultimate strength curves. These two connection types have a practical application in the way they will be analyzed, and also as part of more complex connections: bolted girder splices (in the region of web beam), beam-to-column connections with splice plates or end plate connections, beam splices with end-plates, etc.
Keywords
Modeling of bolted connections, Simple shear connections, T-stub connections, Super-elements, Modeling of bolted connections, Simple shear connections, T-stub connections, Super-elements
