LOGIN / Acesse o sistema

Esqueceu sua senha? Redefina aqui.

Ainda não possui uma conta? Cadastre-se aqui!

REDEFINIR SENHA

Insira o endereço de email associado à sua conta que enviaremos um link de redefinição de senha para você.

Ainda não possui uma conta? Cadastre-se aqui!

Este conteúdo é exclusivo para membros ABCM

Inscreva-se e faça parte da comunidade

CADASTRE-SE

Tem uma conta?

Torne-se um membros ABCM

Veja algumas vantagens em se manter como nosso Associado:

Acesso regular ao JBSMSE
Boletim de notícias ABCM
Acesso livre aos Anais de Eventos
Possibilidade de concorrer às Bolsas de Iniciação Científica da ABCM.
Descontos nos eventos promovidos pela ABCM e pelas entidades com as quais mmantém acordo de cooperação.
Estudantes de gradução serão isentos no primeiro ano de afiliação.
10% de desconto para o Associado que pagar anuidade anntes de completar os 12 meses da última anuidade paga.
Desconto na compra dos livros da ABCM, entre eles: "Engenharia de Dutos" e "Escoamento Multifásico".
CADASTRE-SE SEGUIR PARA O VIDEO >

Tem uma conta?

Eventos Anais de eventos

Anais de eventos

EPTT 2022

13th Spring School on Transition and Turbulence

A droplet-based image velocimetry technique for the measurement of liquid velocity fields in two-phase water-oil dispersion flows

Submission Author: Rafael Franklin Lazaro de Cerqueira , SC
Co-Authors: Rafael Franklin Lazaro de Cerqueira, William Monte Verde, Jorge Luiz Biazussi, Rodolfo Perissinotto, Marcelo Souza de Castro, Antonio Bannwart
Presenter: Rafael Franklin Lazaro de Cerqueira

doi://10.26678/ABCM.EPTT2022.EPT22-0076

 

Abstract

The present work describes a measurement technique to estimate the continuous liquid velocity fields in two-phase water-oil dispersion flows. A transparent pump prototype made of acrylic was firstly developed and installed to enable the use of flow visualization and optical measurement techniques. Then, in the experiments, water droplets were injected into the impeller channels of the centrifugal pump, where a mineral oil with a viscosity of $ \mu_\mathrm{o} $ = 18.0 cP was used as the continuous phase. The two-phase water-oil dispersion flow was then filmed with a high-speed camera, and the water droplets were black-dyed for a better contrast with the white background. When injecting the water drops, breakage events were frequently observed due to turbulence and shear effects, resulting in the birth of small droplets with a size in the range from 100 $ \mu $m to 500 $ \mu $m. The occurrence of small water droplets in combination with the viscous continuous oil phase meant that those droplets could be assumed as tracer particles from the continuous phase. Therefore, by computing the small water droplet velocities, it is possible to estimate the velocity field of the continuous oil phase within an acceptable error margin. This is the main idea of the technique presented in this work, which does not require the addition of intrusive tracer particles, and thus can be seen as a cheap and simple alternative to PIV in two-phase dispersions with continuous viscous phases. After a series of image processing steps, the small water droplets in the range from 100 $ \mu $m to 500 $ \mu $m are identified, and the PTV technique computes their instantaneous velocity. In order to assess the method capabilities, the PTV ensemble-averaged liquid flow rate is compared against experimental values from a Coriolis flowmeter installed in the experimental setup. The technique is then applied to study the flow within a pump impeller, resulting in similar flow patterns found in the literature for studies using LDV and PIV studies.

Keywords

centrifugal pump, PIV, droplets, water-oil dispersion flows

 

DOWNLOAD PDF

 

‹ voltar para anais de eventos ABCM