Lista dos Trabalhos:     Ciências dos Materiais
 
PRODUÇÃO DA MADEIRA PLASTIFICADA DE ELEVADA RESISTÊNCIA À FLEXÃO ESTÁTICA MEDIANTE POLIMERIZAÇÃO INDUZIDA POR RAIOS GAMA
 
DESENVOLVIMENTO DE UMA GERADORA DE ESFERAS DE CERÂMICA PARA PRÓTESES DE QUADRIL
 
ADDITION OF MO E W TO ALTERNATIVE THERMORESISTIVE ALLOYS BASED ON FE-AL-SI-NB.
 
GRANITO SINTÉTICO PARA ESTRUTURAS DE EQUIPAMENTOS DE PRECISÃO DE PEQUENO PORTE - METODOLOGIA DE PROJETO
 
MECHANICAL BEHAVIOR OF A WARM-ROLLED VANADIUM MICROALLOYED MEDIUM CARBON STEEL
 
CHANGES OF THE MECHANICAL PROPERTIES IN POLYOXYMETHYLENE – POM RECYCLING PROCESS
 
STUDY OF THE INFLUENCE OF SAND PERCENTAGE IN CLAY-SAND MIXTURES ON THE DRYING PROCESS OF CERAMIC MATERIALS
 
O PROCESSO DE COLAGEM DE BARBOTINA SOB PRESSÃO, SOB A ÓTICA DA TEORIA GERAL DE FILTRAÇÃO
 
MORPHOLOGY OF POLYMER FILMS OF POLYVINYL CHLORIDE/POLYAMIDE-6 BLENDS
 
DESENVOLVIMENTO E CARACTERIZAÇÃO DE ESPUMAS RÍGIDAS, COM POROS INTERCOMUNICANTES E SUA APLICAÇÃO COMO MEIOS FILTRANTES
 
WEAR OF HIGH DENSITY POLYETHYLENE APPLIED IN THE PRODUCTION OF TUBES FOR EXTRACTION OF PETROLEUM
 
MICROFABRICATION OF HIGH-ASPECT-RATIO MICROSTRUCTURES BY LIGA TECHNOLOGY (LITHOGRAPHY, ELECTROFORMING AND MOLDING)
 
PROPRIEDADES MECÂNICAS E MECANISMO DE DANO EM COMPÓSITOS FIBROSO TIPO SANDWICH
 
DEVELOPMENT OF FIBERGLASS REINFORCED EPOXI AND ALUMINA COMPOSITE PLATES FOR BALLISTIC PROTECTION
 
OPTIMIZATION OF COMPOSITE SHELLS
 
STUDY OF PLATE ELEMENTS APPLIED TO COMPOSITE MATERIALS
 
TIME-DEPENDENT RESPONSE OF A RUBBER-TOUGHENED CARBON/EPOXY COMPOSITE WITH DAMAGE ACCUMULATION
 
THE EFFECT OF THE FIBER ORIENTATION ON THE DYNAMIC BEHAVIOUR OF MULTI-LAYER PLATES
 
THEORETICAL AND EXPERIMENTAL DYNAMIC ANALYSIS OF FIBER REINFORCED COMPOSITE BEAMS
 
BEHAVIOR AND STRENGTH OF REINFORCED CONCRETE BEAMS WITH THE ADDITION OF SHORT STEEL FIBERS
 
ALUMINIUM BASE COMPOSITE REINFORCED WITH NI3AL INTERMETALLIC BY POWDER METALLURGY: MICROSTRUCTURAL, MECHANICAL AND CORROSION CHARACTERIZATION.
 
ANÁLISE EXPERIMENTAL DO COMPORTAMENTO MECÂNICO DE VIGAS LAMINADAS HÍBRIDAS MADEIRA/PLÁSTICO REFORÇADO.
 
A REFINED MULTI-LAYER SHELL ELEMENT USING A MINDLIN´S THEORY EVOLUTION
 
THE EFFECTS OF MECHANICAL ALLOYING ON THE EXTRUSION PROCESS OF AA 6061 ALLOY REINFORCED WITH SI3N4
 
A NUMERICAL APPROACH ON DETERMINIG THE TORSIONAL STIFFNESS OF COMPLEX CROSS SECTIONS
 
AL/SIO2 FIBROUS COMPOSITE OBTAINED BY POWDER METALLURGY
 
THE EFFECT OF THE FIBER ORIENTATION ON THE DYNAMIC BEHAVIOUR OF ROTORS IN WOUNDING-SHAFT
 
NANOINDENTAÇÃO EM AMOSTRAS INOXIDÁVEIS COM EFEITO DE MEMÓRIA DE FORMA
 
ANYSOTROPY INDEXES DETERMINATION IN HSLA STEELS
 
MECHANICAL PROPERTIES OF COTTON FIBERS USED ON OPEN-END SPINNING TO MAKE DENIM FABRIC: CASE STUDY AT TEXTILE INDUSTRIES IN CEARÁ.
 
AUTOMATED TESTING SYSTEM FOR OVERHEAD LINE CABLES
 
TOUGHNESS ANISOTROPY IN HSLA STEELS
 
THE INFLUENCE OF CHEMICAL COMPOSITION OF HIGH-SPEED STEELS ON THE WEAR DURING CUTTING AND EROSION TESTS
 
TENSION RESISTANCE OF LAMINATED COMPOSITE OF ALUMINUM WITH EPOXY RESIN REINFORCED BY GLASS FIBERS
 
SOME ASPECTS OF MECHANICAL BEHAVIOUR OF CYCLICALLY-LOADED GRADE II TITANIUM
 
APPLICATION OF NEURAL NETWORKS IN STEELS CHEMICAL COMPOSITION DESIGN
 
LOW - CYCLE FATIGUE. CYCLIC PROPERTIES OF AN AL 6061-T651
 
MECHANICAL PROPERTIES OF MULTILAYER COATINGS BY NANOINDENTATION METHOD
 
A Influência das Partículas de Segunda Fase nas Propriedades Mecânicas da Liga de Alumínio 7050
 
DETERMINATION OF EUTECTOIDS STEELS MECHANICAL PROPERTIES AND COSTS
 
EFFECT OF THE STRAIN PATH IN THE STRAIN HARDENING OF THE STEEL AND BRASS DEFORMED IN TENSION AND TORSION
 
ABNT M2 HIGH SPEED STEEL HEAT TREATMENT.
 
INFLUÊNCIA DA SOLUBILIZAÇÃO NAS PROPRIEDADES MAGNÉTICAS DE LIGAS FE-11MO-5NI-0,05C
 

 


COBEM99 | Comissão  Organizadora | Palestras | Sessões Técnicas | Autor | Simpósios e Sessões  Especiais | Revisores
Título  dos  Trabalhos | Local